* [PATCH net-next 0/8] s390/qeth: updates 2019-10-31
@ 2019-10-31 12:42 Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 1/8] s390/qdio: implement IQD Multi-Write Julian Wiedmann
` (8 more replies)
0 siblings, 9 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
Hi Dave,
please apply the following series of spooky qeth updates for net-next.
The first two patches add support for an enhanced TX doorbell, which
enables us to do more xmit_more-based bulking.
Note that this requires one patch for the s390/qdio base layer, which
has been graciously acked by Heiko to go through your tree.
The remaining patches are just the usual minor cleanups/improvements.
Thanks,
Julian
Julian Wiedmann (8):
s390/qdio: implement IQD Multi-Write
s390/qeth: use IQD Multi-Write
s390/qeth: use QDIO_BUFNR()
s390/qeth: keep IRQ disabled until NAPI is really done
s390/qeth: consolidate some duplicated HW cmd code
s390/qeth: don't set card state in qeth_qdio_clear_card()
s390/qeth: use helpers for IP address hashing
s390/qeth: don't cache MAC addresses for multicast IPs
drivers/s390/cio/qdio.h | 1 +
drivers/s390/cio/qdio_main.c | 31 +++++----
drivers/s390/net/qeth_core.h | 9 +++
drivers/s390/net/qeth_core_main.c | 108 ++++++++++++++++++++----------
drivers/s390/net/qeth_core_mpc.h | 4 +-
drivers/s390/net/qeth_l2_main.c | 21 ------
drivers/s390/net/qeth_l3.h | 24 ++-----
drivers/s390/net/qeth_l3_main.c | 41 ++++--------
8 files changed, 120 insertions(+), 119 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH net-next 1/8] s390/qdio: implement IQD Multi-Write
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 2/8] s390/qeth: use " Julian Wiedmann
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
This allows IQD drivers to send out multiple SBALs with a single SIGA
instruction.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
drivers/s390/cio/qdio.h | 1 +
drivers/s390/cio/qdio_main.c | 31 +++++++++++++++----------------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index a58b45df95d7..2a34a2ab9bf7 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -82,6 +82,7 @@ enum qdio_irq_states {
#define QDIO_SIGA_WRITE 0x00
#define QDIO_SIGA_READ 0x01
#define QDIO_SIGA_SYNC 0x02
+#define QDIO_SIGA_WRITEM 0x03
#define QDIO_SIGA_WRITEQ 0x04
#define QDIO_SIGA_QEBSM_FLAG 0x80
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 5b63c505a2f7..7368407030b0 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -310,18 +310,19 @@ static inline int qdio_siga_sync_q(struct qdio_q *q)
return qdio_siga_sync(q, q->mask, 0);
}
-static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit,
- unsigned long aob)
+static int qdio_siga_output(struct qdio_q *q, unsigned int count,
+ unsigned int *busy_bit, unsigned long aob)
{
unsigned long schid = *((u32 *) &q->irq_ptr->schid);
unsigned int fc = QDIO_SIGA_WRITE;
u64 start_time = 0;
int retries = 0, cc;
- unsigned long laob = 0;
- if (aob) {
- fc = QDIO_SIGA_WRITEQ;
- laob = aob;
+ if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q)) {
+ if (count > 1)
+ fc = QDIO_SIGA_WRITEM;
+ else if (aob)
+ fc = QDIO_SIGA_WRITEQ;
}
if (is_qebsm(q)) {
@@ -329,7 +330,7 @@ static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit,
fc |= QDIO_SIGA_QEBSM_FLAG;
}
again:
- cc = do_siga_output(schid, q->mask, busy_bit, fc, laob);
+ cc = do_siga_output(schid, q->mask, busy_bit, fc, aob);
/* hipersocket busy condition */
if (unlikely(*busy_bit)) {
@@ -781,7 +782,8 @@ static inline int qdio_outbound_q_moved(struct qdio_q *q, unsigned int start)
return count;
}
-static int qdio_kick_outbound_q(struct qdio_q *q, unsigned long aob)
+static int qdio_kick_outbound_q(struct qdio_q *q, unsigned int count,
+ unsigned long aob)
{
int retries = 0, cc;
unsigned int busy_bit;
@@ -793,7 +795,7 @@ static int qdio_kick_outbound_q(struct qdio_q *q, unsigned long aob)
retry:
qperf_inc(q, siga_write);
- cc = qdio_siga_output(q, &busy_bit, aob);
+ cc = qdio_siga_output(q, count, &busy_bit, aob);
switch (cc) {
case 0:
break;
@@ -1526,7 +1528,7 @@ static int handle_inbound(struct qdio_q *q, unsigned int callflags,
* @count: how many buffers are filled
*/
static int handle_outbound(struct qdio_q *q, unsigned int callflags,
- int bufnr, int count)
+ unsigned int bufnr, unsigned int count)
{
const unsigned int scan_threshold = q->irq_ptr->scan_threshold;
unsigned char state = 0;
@@ -1549,13 +1551,10 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags,
if (queue_type(q) == QDIO_IQDIO_QFMT) {
unsigned long phys_aob = 0;
- /* One SIGA-W per buffer required for unicast HSI */
- WARN_ON_ONCE(count > 1 && !multicast_outbound(q));
-
- if (q->u.out.use_cq)
+ if (q->u.out.use_cq && count == 1)
phys_aob = qdio_aob_for_buffer(&q->u.out, bufnr);
- rc = qdio_kick_outbound_q(q, phys_aob);
+ rc = qdio_kick_outbound_q(q, count, phys_aob);
} else if (need_siga_sync(q)) {
rc = qdio_siga_sync_q(q);
} else if (count < QDIO_MAX_BUFFERS_PER_Q &&
@@ -1564,7 +1563,7 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags,
/* The previous buffer is not processed yet, tack on. */
qperf_inc(q, fast_requeue);
} else {
- rc = qdio_kick_outbound_q(q, 0);
+ rc = qdio_kick_outbound_q(q, count, 0);
}
/* Let drivers implement their own completion scanning: */
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH net-next 2/8] s390/qeth: use IQD Multi-Write
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 1/8] s390/qdio: implement IQD Multi-Write Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 3/8] s390/qeth: use QDIO_BUFNR() Julian Wiedmann
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
For IQD devices with Multi-Write support, we can defer the queue-flush
further and transmit multiple IO buffers with a single TX doorbell.
The same-target restriction still applies.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
---
drivers/s390/net/qeth_core.h | 9 ++++++
drivers/s390/net/qeth_core_main.c | 54 +++++++++++++++++++++++++------
2 files changed, 53 insertions(+), 10 deletions(-)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index e4b55f9aa062..d08154502b15 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -532,6 +532,8 @@ struct qeth_qdio_out_q {
struct timer_list timer;
struct qeth_hdr *prev_hdr;
u8 bulk_start;
+ u8 bulk_count;
+ u8 bulk_max;
};
#define qeth_for_each_output_queue(card, q, i) \
@@ -878,6 +880,13 @@ static inline u16 qeth_iqd_translate_txq(struct net_device *dev, u16 txq)
return txq;
}
+static inline bool qeth_iqd_is_mcast_queue(struct qeth_card *card,
+ struct qeth_qdio_out_q *queue)
+{
+ return qeth_iqd_translate_txq(card->dev, queue->queue_no) ==
+ QETH_IQD_MCAST_TXQ;
+}
+
static inline void qeth_scrub_qdio_buffer(struct qdio_buffer *buf,
unsigned int elements)
{
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index dda274351c21..62054afd73cc 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2634,6 +2634,18 @@ static int qeth_init_input_buffer(struct qeth_card *card,
return 0;
}
+static unsigned int qeth_tx_select_bulk_max(struct qeth_card *card,
+ struct qeth_qdio_out_q *queue)
+{
+ if (!IS_IQD(card) ||
+ qeth_iqd_is_mcast_queue(card, queue) ||
+ card->options.cq == QETH_CQ_ENABLED ||
+ qdio_get_ssqd_desc(CARD_DDEV(card), &card->ssqd))
+ return 1;
+
+ return card->ssqd.mmwc ? card->ssqd.mmwc : 1;
+}
+
int qeth_init_qdio_queues(struct qeth_card *card)
{
unsigned int i;
@@ -2673,6 +2685,8 @@ int qeth_init_qdio_queues(struct qeth_card *card)
queue->do_pack = 0;
queue->prev_hdr = NULL;
queue->bulk_start = 0;
+ queue->bulk_count = 0;
+ queue->bulk_max = qeth_tx_select_bulk_max(card, queue);
atomic_set(&queue->used_buffers, 0);
atomic_set(&queue->set_pci_flags_count, 0);
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
@@ -3318,10 +3332,11 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
static void qeth_flush_queue(struct qeth_qdio_out_q *queue)
{
- qeth_flush_buffers(queue, queue->bulk_start, 1);
+ qeth_flush_buffers(queue, queue->bulk_start, queue->bulk_count);
- queue->bulk_start = QDIO_BUFNR(queue->bulk_start + 1);
+ queue->bulk_start = QDIO_BUFNR(queue->bulk_start + queue->bulk_count);
queue->prev_hdr = NULL;
+ queue->bulk_count = 0;
}
static void qeth_check_outbound_queue(struct qeth_qdio_out_q *queue)
@@ -3680,10 +3695,10 @@ static int qeth_add_hw_header(struct qeth_qdio_out_q *queue,
}
static bool qeth_iqd_may_bulk(struct qeth_qdio_out_q *queue,
- struct qeth_qdio_out_buffer *buffer,
struct sk_buff *curr_skb,
struct qeth_hdr *curr_hdr)
{
+ struct qeth_qdio_out_buffer *buffer = queue->bufs[queue->bulk_start];
struct qeth_hdr *prev_hdr = queue->prev_hdr;
if (!prev_hdr)
@@ -3803,13 +3818,14 @@ static int __qeth_xmit(struct qeth_card *card, struct qeth_qdio_out_q *queue,
struct qeth_hdr *hdr, unsigned int offset,
unsigned int hd_len)
{
- struct qeth_qdio_out_buffer *buffer = queue->bufs[queue->bulk_start];
unsigned int bytes = qdisc_pkt_len(skb);
+ struct qeth_qdio_out_buffer *buffer;
unsigned int next_element;
struct netdev_queue *txq;
bool stopped = false;
bool flush;
+ buffer = queue->bufs[QDIO_BUFNR(queue->bulk_start + queue->bulk_count)];
txq = netdev_get_tx_queue(card->dev, skb_get_queue_mapping(skb));
/* Just a sanity check, the wake/stop logic should ensure that we always
@@ -3818,11 +3834,23 @@ static int __qeth_xmit(struct qeth_card *card, struct qeth_qdio_out_q *queue,
if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY)
return -EBUSY;
- if ((buffer->next_element_to_fill + elements > queue->max_elements) ||
- !qeth_iqd_may_bulk(queue, buffer, skb, hdr)) {
- atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED);
- qeth_flush_queue(queue);
- buffer = queue->bufs[queue->bulk_start];
+ flush = !qeth_iqd_may_bulk(queue, skb, hdr);
+
+ if (flush ||
+ (buffer->next_element_to_fill + elements > queue->max_elements)) {
+ if (buffer->next_element_to_fill > 0) {
+ atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED);
+ queue->bulk_count++;
+ }
+
+ if (queue->bulk_count >= queue->bulk_max)
+ flush = true;
+
+ if (flush)
+ qeth_flush_queue(queue);
+
+ buffer = queue->bufs[QDIO_BUFNR(queue->bulk_start +
+ queue->bulk_count)];
/* Sanity-check again: */
if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY)
@@ -3848,7 +3876,13 @@ static int __qeth_xmit(struct qeth_card *card, struct qeth_qdio_out_q *queue,
if (flush || next_element >= queue->max_elements) {
atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED);
- qeth_flush_queue(queue);
+ queue->bulk_count++;
+
+ if (queue->bulk_count >= queue->bulk_max)
+ flush = true;
+
+ if (flush)
+ qeth_flush_queue(queue);
}
if (stopped && !qeth_out_queue_is_full(queue))
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH net-next 3/8] s390/qeth: use QDIO_BUFNR()
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 1/8] s390/qdio: implement IQD Multi-Write Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 2/8] s390/qeth: use " Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 4/8] s390/qeth: keep IRQ disabled until NAPI is really done Julian Wiedmann
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
qdio.h recently gained a new helper macro that handles wrap-around on a
QDIO queue, consistently use it across all of qeth.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 37 ++++++++++++++-----------------
1 file changed, 17 insertions(+), 20 deletions(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 62054afd73cc..52e3adb7864a 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3121,7 +3121,7 @@ static void qeth_queue_input_buffer(struct qeth_card *card, int index)
for (i = queue->next_buf_to_init;
i < queue->next_buf_to_init + count; ++i) {
if (qeth_init_input_buffer(card,
- &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q])) {
+ &queue->bufs[QDIO_BUFNR(i)])) {
break;
} else {
newcount++;
@@ -3163,8 +3163,8 @@ static void qeth_queue_input_buffer(struct qeth_card *card, int index)
if (rc) {
QETH_CARD_TEXT(card, 2, "qinberr");
}
- queue->next_buf_to_init = (queue->next_buf_to_init + count) %
- QDIO_MAX_BUFFERS_PER_Q;
+ queue->next_buf_to_init = QDIO_BUFNR(queue->next_buf_to_init +
+ count);
}
}
@@ -3212,7 +3212,7 @@ static int qeth_prep_flush_pack_buffer(struct qeth_qdio_out_q *queue)
/* it's a packing buffer */
atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED);
queue->next_buf_to_fill =
- (queue->next_buf_to_fill + 1) % QDIO_MAX_BUFFERS_PER_Q;
+ QDIO_BUFNR(queue->next_buf_to_fill + 1);
return 1;
}
return 0;
@@ -3266,7 +3266,8 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
unsigned int qdio_flags;
for (i = index; i < index + count; ++i) {
- int bidx = i % QDIO_MAX_BUFFERS_PER_Q;
+ unsigned int bidx = QDIO_BUFNR(i);
+
buf = queue->bufs[bidx];
buf->buffer->element[buf->next_element_to_fill - 1].eflags |=
SBAL_EFLAGS_LAST_ENTRY;
@@ -3434,8 +3435,7 @@ static void qeth_qdio_cq_handler(struct qeth_card *card, unsigned int qdio_err,
}
for (i = first_element; i < first_element + count; ++i) {
- int bidx = i % QDIO_MAX_BUFFERS_PER_Q;
- struct qdio_buffer *buffer = cq->qdio_bufs[bidx];
+ struct qdio_buffer *buffer = cq->qdio_bufs[QDIO_BUFNR(i)];
int e = 0;
while ((e < QDIO_MAX_ELEMENTS_PER_BUFFER) &&
@@ -3456,8 +3456,8 @@ static void qeth_qdio_cq_handler(struct qeth_card *card, unsigned int qdio_err,
"QDIO reported an error, rc=%i\n", rc);
QETH_CARD_TEXT(card, 2, "qcqherr");
}
- card->qdio.c_q->next_buf_to_init = (card->qdio.c_q->next_buf_to_init
- + count) % QDIO_MAX_BUFFERS_PER_Q;
+
+ cq->next_buf_to_init = QDIO_BUFNR(cq->next_buf_to_init + count);
}
static void qeth_qdio_input_handler(struct ccw_device *ccwdev,
@@ -3483,7 +3483,6 @@ static void qeth_qdio_output_handler(struct ccw_device *ccwdev,
{
struct qeth_card *card = (struct qeth_card *) card_ptr;
struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue];
- struct qeth_qdio_out_buffer *buffer;
struct net_device *dev = card->dev;
struct netdev_queue *txq;
int i;
@@ -3497,10 +3496,10 @@ static void qeth_qdio_output_handler(struct ccw_device *ccwdev,
}
for (i = first_element; i < (first_element + count); ++i) {
- int bidx = i % QDIO_MAX_BUFFERS_PER_Q;
- buffer = queue->bufs[bidx];
- qeth_handle_send_error(card, buffer, qdio_error);
- qeth_clear_output_buffer(queue, buffer, qdio_error, 0);
+ struct qeth_qdio_out_buffer *buf = queue->bufs[QDIO_BUFNR(i)];
+
+ qeth_handle_send_error(card, buf, qdio_error);
+ qeth_clear_output_buffer(queue, buf, qdio_error, 0);
}
atomic_sub(count, &queue->used_buffers);
@@ -3932,8 +3931,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED);
flush_count++;
queue->next_buf_to_fill =
- (queue->next_buf_to_fill + 1) %
- QDIO_MAX_BUFFERS_PER_Q;
+ QDIO_BUFNR(queue->next_buf_to_fill + 1);
buffer = queue->bufs[queue->next_buf_to_fill];
/* We stepped forward, so sanity-check again: */
@@ -3966,8 +3964,8 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
if (!queue->do_pack || stopped || next_element >= queue->max_elements) {
flush_count++;
atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED);
- queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) %
- QDIO_MAX_BUFFERS_PER_Q;
+ queue->next_buf_to_fill =
+ QDIO_BUFNR(queue->next_buf_to_fill + 1);
}
if (flush_count)
@@ -5199,8 +5197,7 @@ int qeth_poll(struct napi_struct *napi, int budget)
card->rx.b_count--;
if (card->rx.b_count) {
card->rx.b_index =
- (card->rx.b_index + 1) %
- QDIO_MAX_BUFFERS_PER_Q;
+ QDIO_BUFNR(card->rx.b_index + 1);
card->rx.b_element =
&card->qdio.in_q
->bufs[card->rx.b_index]
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH net-next 4/8] s390/qeth: keep IRQ disabled until NAPI is really done
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
` (2 preceding siblings ...)
2019-10-31 12:42 ` [PATCH net-next 3/8] s390/qeth: use QDIO_BUFNR() Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 5/8] s390/qeth: consolidate some duplicated HW cmd code Julian Wiedmann
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
When napi_complete_done() returns false, the NAPI instance is still
active and we can keep the IRQ disabled a little longer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 52e3adb7864a..d4e66707a03f 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -5213,9 +5213,9 @@ int qeth_poll(struct napi_struct *napi, int budget)
}
}
- napi_complete_done(napi, work_done);
- if (qdio_start_irq(card->data.ccwdev, 0))
- napi_schedule(&card->napi);
+ if (napi_complete_done(napi, work_done) &&
+ qdio_start_irq(CARD_DDEV(card), 0))
+ napi_schedule(napi);
out:
return work_done;
}
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH net-next 5/8] s390/qeth: consolidate some duplicated HW cmd code
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
` (3 preceding siblings ...)
2019-10-31 12:42 ` [PATCH net-next 4/8] s390/qeth: keep IRQ disabled until NAPI is really done Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 6/8] s390/qeth: don't set card state in qeth_qdio_clear_card() Julian Wiedmann
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
When setting a device online, both subdrivers have the same code to
program the HW trap and Isolation mode. Move that code into a single
place.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 10 +++++++++-
drivers/s390/net/qeth_l2_main.c | 21 ---------------------
drivers/s390/net/qeth_l3_main.c | 9 ---------
3 files changed, 9 insertions(+), 31 deletions(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index d4e66707a03f..d51dcb3c5a01 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4293,7 +4293,6 @@ int qeth_set_access_ctrl_online(struct qeth_card *card, int fallback)
}
return rc;
}
-EXPORT_SYMBOL_GPL(qeth_set_access_ctrl_online);
void qeth_tx_timeout(struct net_device *dev)
{
@@ -5009,6 +5008,15 @@ int qeth_core_hardsetup_card(struct qeth_card *card, bool *carrier_ok)
goto out;
}
}
+
+ if (!qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP) ||
+ (card->info.hwtrap && qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM)))
+ card->info.hwtrap = 0;
+
+ rc = qeth_set_access_ctrl_online(card, 0);
+ if (rc)
+ goto out;
+
return 0;
out:
dev_warn(&card->gdev->dev, "The qeth device driver failed to recover "
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index bd8143e51747..8f3093d24b12 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -759,14 +759,6 @@ static int qeth_l2_setup_netdev(struct qeth_card *card, bool carrier_ok)
return rc;
}
-static int qeth_l2_start_ipassists(struct qeth_card *card)
-{
- /* configure isolation level */
- if (qeth_set_access_ctrl_online(card, 0))
- return -ENODEV;
- return 0;
-}
-
static void qeth_l2_trace_features(struct qeth_card *card)
{
/* Set BridgePort features */
@@ -797,13 +789,6 @@ static int qeth_l2_set_online(struct ccwgroup_device *gdev)
goto out_remove;
}
- if (qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP)) {
- if (card->info.hwtrap &&
- qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM))
- card->info.hwtrap = 0;
- } else
- card->info.hwtrap = 0;
-
qeth_bridgeport_query_support(card);
if (card->options.sbp.supported_funcs)
dev_info(&card->gdev->dev,
@@ -825,12 +810,6 @@ static int qeth_l2_set_online(struct ccwgroup_device *gdev)
/* softsetup */
QETH_CARD_TEXT(card, 2, "softsetp");
- if (IS_OSD(card) || IS_OSX(card)) {
- rc = qeth_l2_start_ipassists(card);
- if (rc)
- goto out_remove;
- }
-
rc = qeth_init_qdio_queues(card);
if (rc) {
QETH_CARD_TEXT_(card, 2, "6err%d", rc);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index d7bfc7a0e4c0..acae44a699ad 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -953,8 +953,6 @@ static int qeth_l3_start_ipassists(struct qeth_card *card)
{
QETH_CARD_TEXT(card, 3, "strtipas");
- if (qeth_set_access_ctrl_online(card, 0))
- return -EIO;
qeth_l3_start_ipa_arp_processing(card); /* go on*/
qeth_l3_start_ipa_source_mac(card); /* go on*/
qeth_l3_start_ipa_vlan(card); /* go on*/
@@ -2313,13 +2311,6 @@ static int qeth_l3_set_online(struct ccwgroup_device *gdev)
goto out_remove;
}
- if (qeth_is_diagass_supported(card, QETH_DIAGS_CMD_TRAP)) {
- if (card->info.hwtrap &&
- qeth_hw_trap(card, QETH_DIAGS_TRAP_ARM))
- card->info.hwtrap = 0;
- } else
- card->info.hwtrap = 0;
-
card->state = CARD_STATE_HARDSETUP;
qeth_print_status_message(card);
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH net-next 6/8] s390/qeth: don't set card state in qeth_qdio_clear_card()
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
` (4 preceding siblings ...)
2019-10-31 12:42 ` [PATCH net-next 5/8] s390/qeth: consolidate some duplicated HW cmd code Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 7/8] s390/qeth: use helpers for IP address hashing Julian Wiedmann
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
Any change to the card state should only be driven by
qeth_l?_set_online() and qeth_l?_stop_card().
qeth_qdio_clear_card() currently also gets called from
(a) qeth_core_shutdown(), where we haven't walked through the whole
teardown sequence. So changing the state to DOWN is not accurate.
(b) qeth_core_hardsetup_card(), which is only called while the card is
still in DOWN state. No change in behaviour here.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index d51dcb3c5a01..9e8bd8e08146 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1513,7 +1513,6 @@ int qeth_qdio_clear_card(struct qeth_card *card, int use_halt)
rc = qeth_clear_halt_card(card, use_halt);
if (rc)
QETH_CARD_TEXT_(card, 3, "2err%d", rc);
- card->state = CARD_STATE_DOWN;
return rc;
}
EXPORT_SYMBOL_GPL(qeth_qdio_clear_card);
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH net-next 7/8] s390/qeth: use helpers for IP address hashing
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
` (5 preceding siblings ...)
2019-10-31 12:42 ` [PATCH net-next 6/8] s390/qeth: don't set card state in qeth_qdio_clear_card() Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 8/8] s390/qeth: don't cache MAC addresses for multicast IPs Julian Wiedmann
2019-10-31 19:33 ` [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 David Miller
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
Replace our custom implementations with the stack's version of IP address
hashing.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_l3.h | 21 ++++++---------------
drivers/s390/net/qeth_l3_main.c | 8 ++++----
2 files changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/s390/net/qeth_l3.h b/drivers/s390/net/qeth_l3.h
index 87659cfc9066..b7ba404a81f9 100644
--- a/drivers/s390/net/qeth_l3.h
+++ b/drivers/s390/net/qeth_l3.h
@@ -37,7 +37,7 @@ struct qeth_ipaddr {
enum qeth_prot_versions proto;
union {
struct {
- unsigned int addr;
+ __be32 addr;
unsigned int mask;
} a4;
struct {
@@ -89,21 +89,12 @@ static inline bool qeth_l3_addr_match_all(struct qeth_ipaddr *a1,
return a1->u.a4.mask == a2->u.a4.mask;
}
-static inline u64 qeth_l3_ipaddr_hash(struct qeth_ipaddr *addr)
+static inline u32 qeth_l3_ipaddr_hash(struct qeth_ipaddr *addr)
{
- u64 ret = 0;
- u8 *point;
-
- if (addr->proto == QETH_PROT_IPV6) {
- point = (u8 *) &addr->u.a6.addr;
- ret = get_unaligned((u64 *)point) ^
- get_unaligned((u64 *) (point + 8));
- }
- if (addr->proto == QETH_PROT_IPV4) {
- point = (u8 *) &addr->u.a4.addr;
- ret = get_unaligned((u32 *) point);
- }
- return ret;
+ if (addr->proto == QETH_PROT_IPV6)
+ return ipv6_addr_hash(&addr->u.a6.addr);
+ else
+ return ipv4_addr_hash(addr->u.a4.addr);
}
struct qeth_ipato_entry {
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index acae44a699ad..8f92407bf580 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -76,7 +76,7 @@ static struct qeth_ipaddr *qeth_l3_get_addr_buffer(enum qeth_prot_versions prot)
static struct qeth_ipaddr *qeth_l3_find_addr_by_ip(struct qeth_card *card,
struct qeth_ipaddr *query)
{
- u64 key = qeth_l3_ipaddr_hash(query);
+ u32 key = qeth_l3_ipaddr_hash(query);
struct qeth_ipaddr *addr;
if (query->is_multicast) {
@@ -1128,7 +1128,7 @@ qeth_l3_add_mc_to_hash(struct qeth_card *card, struct in_device *in4_dev)
for (im4 = rcu_dereference(in4_dev->mc_list); im4 != NULL;
im4 = rcu_dereference(im4->next_rcu)) {
ip_eth_mc_map(im4->multiaddr, tmp->mac);
- tmp->u.a4.addr = be32_to_cpu(im4->multiaddr);
+ tmp->u.a4.addr = im4->multiaddr;
tmp->is_multicast = 1;
ipm = qeth_l3_find_addr_by_ip(card, tmp);
@@ -1140,7 +1140,7 @@ qeth_l3_add_mc_to_hash(struct qeth_card *card, struct in_device *in4_dev)
if (!ipm)
continue;
ether_addr_copy(ipm->mac, tmp->mac);
- ipm->u.a4.addr = be32_to_cpu(im4->multiaddr);
+ ipm->u.a4.addr = im4->multiaddr;
ipm->is_multicast = 1;
ipm->disp_flag = QETH_DISP_ADDR_ADD;
hash_add(card->ip_mc_htable,
@@ -2548,7 +2548,7 @@ static int qeth_l3_ip_event(struct notifier_block *this,
QETH_CARD_TEXT(card, 3, "ipevent");
qeth_l3_init_ipaddr(&addr, QETH_IP_TYPE_NORMAL, QETH_PROT_IPV4);
- addr.u.a4.addr = be32_to_cpu(ifa->ifa_address);
+ addr.u.a4.addr = ifa->ifa_address;
addr.u.a4.mask = be32_to_cpu(ifa->ifa_mask);
return qeth_l3_handle_ip_event(card, &addr, event);
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH net-next 8/8] s390/qeth: don't cache MAC addresses for multicast IPs
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
` (6 preceding siblings ...)
2019-10-31 12:42 ` [PATCH net-next 7/8] s390/qeth: use helpers for IP address hashing Julian Wiedmann
@ 2019-10-31 12:42 ` Julian Wiedmann
2019-10-31 19:33 ` [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 David Miller
8 siblings, 0 replies; 10+ messages in thread
From: Julian Wiedmann @ 2019-10-31 12:42 UTC (permalink / raw)
To: David Miller
Cc: netdev, linux-s390, Heiko Carstens, Stefan Raspl, Ursula Braun,
Julian Wiedmann
Instead of storing the multicast-mapped MAC address in an IP address
object, just calculate the MAC address when actually building a cmd
for the IP address.
While at it, also clean up some rather verbose copying of IP addresses.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core_mpc.h | 4 ++--
drivers/s390/net/qeth_l3.h | 3 ---
drivers/s390/net/qeth_l3_main.c | 24 ++++++++++--------------
3 files changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 6420b58cf42b..9ad0d6f9d48b 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -11,6 +11,7 @@
#include <asm/qeth.h>
#include <uapi/linux/if_ether.h>
+#include <uapi/linux/in6.h>
#define IPA_PDU_HEADER_SIZE 0x40
#define QETH_IPA_PDU_LEN_TOTAL(buffer) (buffer + 0x0e)
@@ -365,8 +366,7 @@ struct qeth_ipacmd_setdelip6 {
struct qeth_ipacmd_setdelipm {
__u8 mac[6];
__u8 padding[2];
- __u8 ip6[12];
- __u8 ip4[4];
+ struct in6_addr ip;
} __attribute__ ((packed));
struct qeth_ipacmd_layer2setdelmac {
diff --git a/drivers/s390/net/qeth_l3.h b/drivers/s390/net/qeth_l3.h
index b7ba404a81f9..ba913d1ab88d 100644
--- a/drivers/s390/net/qeth_l3.h
+++ b/drivers/s390/net/qeth_l3.h
@@ -24,7 +24,6 @@ enum qeth_ip_types {
struct qeth_ipaddr {
struct hlist_node hnode;
enum qeth_ip_types type;
- unsigned char mac[ETH_ALEN];
u8 is_multicast:1;
u8 in_progress:1;
u8 disp_flag:2;
@@ -74,12 +73,10 @@ static inline bool qeth_l3_addr_match_all(struct qeth_ipaddr *a1,
* so 'proto' and 'addr' match for sure.
*
* For ucast:
- * - 'mac' is always 0.
* - 'mask'/'pfxlen' for RXIP/VIPA is always 0. For NORMAL, matching
* values are required to avoid mixups in takeover eligibility.
*
* For mcast,
- * - 'mac' is mapped from the IP, and thus always matches.
* - 'mask'/'pfxlen' is always 0.
*/
if (a1->type != a2->type)
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 8f92407bf580..70d4586dc779 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -381,12 +381,13 @@ static int qeth_l3_send_setdelmc(struct qeth_card *card,
if (!iob)
return -ENOMEM;
cmd = __ipa_cmd(iob);
- ether_addr_copy(cmd->data.setdelipm.mac, addr->mac);
- if (addr->proto == QETH_PROT_IPV6)
- memcpy(cmd->data.setdelipm.ip6, &addr->u.a6.addr,
- sizeof(struct in6_addr));
- else
- memcpy(&cmd->data.setdelipm.ip4, &addr->u.a4.addr, 4);
+ if (addr->proto == QETH_PROT_IPV6) {
+ cmd->data.setdelipm.ip = addr->u.a6.addr;
+ ipv6_eth_mc_map(&addr->u.a6.addr, cmd->data.setdelipm.mac);
+ } else {
+ cmd->data.setdelipm.ip.s6_addr32[3] = addr->u.a4.addr;
+ ip_eth_mc_map(addr->u.a4.addr, cmd->data.setdelipm.mac);
+ }
return qeth_send_ipa_cmd(card, iob, qeth_l3_setdelip_cb, NULL);
}
@@ -1127,7 +1128,6 @@ qeth_l3_add_mc_to_hash(struct qeth_card *card, struct in_device *in4_dev)
for (im4 = rcu_dereference(in4_dev->mc_list); im4 != NULL;
im4 = rcu_dereference(im4->next_rcu)) {
- ip_eth_mc_map(im4->multiaddr, tmp->mac);
tmp->u.a4.addr = im4->multiaddr;
tmp->is_multicast = 1;
@@ -1139,7 +1139,7 @@ qeth_l3_add_mc_to_hash(struct qeth_card *card, struct in_device *in4_dev)
ipm = qeth_l3_get_addr_buffer(QETH_PROT_IPV4);
if (!ipm)
continue;
- ether_addr_copy(ipm->mac, tmp->mac);
+
ipm->u.a4.addr = im4->multiaddr;
ipm->is_multicast = 1;
ipm->disp_flag = QETH_DISP_ADDR_ADD;
@@ -1207,9 +1207,7 @@ static void qeth_l3_add_mc6_to_hash(struct qeth_card *card,
return;
for (im6 = in6_dev->mc_list; im6 != NULL; im6 = im6->next) {
- ipv6_eth_mc_map(&im6->mca_addr, tmp->mac);
- memcpy(&tmp->u.a6.addr, &im6->mca_addr.s6_addr,
- sizeof(struct in6_addr));
+ tmp->u.a6.addr = im6->mca_addr;
tmp->is_multicast = 1;
ipm = qeth_l3_find_addr_by_ip(card, tmp);
@@ -1223,9 +1221,7 @@ static void qeth_l3_add_mc6_to_hash(struct qeth_card *card,
if (!ipm)
continue;
- ether_addr_copy(ipm->mac, tmp->mac);
- memcpy(&ipm->u.a6.addr, &im6->mca_addr.s6_addr,
- sizeof(struct in6_addr));
+ ipm->u.a6.addr = im6->mca_addr;
ipm->is_multicast = 1;
ipm->disp_flag = QETH_DISP_ADDR_ADD;
hash_add(card->ip_mc_htable,
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH net-next 0/8] s390/qeth: updates 2019-10-31
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
` (7 preceding siblings ...)
2019-10-31 12:42 ` [PATCH net-next 8/8] s390/qeth: don't cache MAC addresses for multicast IPs Julian Wiedmann
@ 2019-10-31 19:33 ` David Miller
8 siblings, 0 replies; 10+ messages in thread
From: David Miller @ 2019-10-31 19:33 UTC (permalink / raw)
To: jwi; +Cc: netdev, linux-s390, heiko.carstens, raspl, ubraun
From: Julian Wiedmann <jwi@linux.ibm.com>
Date: Thu, 31 Oct 2019 13:42:13 +0100
> please apply the following series of spooky qeth updates for net-next.
I hear that if you hack on S390, every day is like Halloween.
> The first two patches add support for an enhanced TX doorbell, which
> enables us to do more xmit_more-based bulking.
> Note that this requires one patch for the s390/qdio base layer, which
> has been graciously acked by Heiko to go through your tree.
>
> The remaining patches are just the usual minor cleanups/improvements.
Series applied to net-next, thank you.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-10-31 19:33 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-31 12:42 [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 1/8] s390/qdio: implement IQD Multi-Write Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 2/8] s390/qeth: use " Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 3/8] s390/qeth: use QDIO_BUFNR() Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 4/8] s390/qeth: keep IRQ disabled until NAPI is really done Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 5/8] s390/qeth: consolidate some duplicated HW cmd code Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 6/8] s390/qeth: don't set card state in qeth_qdio_clear_card() Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 7/8] s390/qeth: use helpers for IP address hashing Julian Wiedmann
2019-10-31 12:42 ` [PATCH net-next 8/8] s390/qeth: don't cache MAC addresses for multicast IPs Julian Wiedmann
2019-10-31 19:33 ` [PATCH net-next 0/8] s390/qeth: updates 2019-10-31 David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).