netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: jakub.kicinski@netronome.com, davem@davemloft.net,
	alexandre.belloni@bootlin.com
Cc: andrew@lunn.ch, f.fainelli@gmail.com, vivien.didelot@gmail.com,
	joergen.andreasen@microchip.com, allan.nielsen@microchip.com,
	horatiu.vultur@microchip.com, claudiu.manoil@nxp.com,
	netdev@vger.kernel.org, Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: [PATCH net-next 02/12] net: mscc: ocelot: filter out ocelot SoC specific PCS config from common path
Date: Tue, 12 Nov 2019 14:44:10 +0200	[thread overview]
Message-ID: <20191112124420.6225-3-olteanv@gmail.com> (raw)
In-Reply-To: <20191112124420.6225-1-olteanv@gmail.com>

From: Claudiu Manoil <claudiu.manoil@nxp.com>

The adjust_link routine should be generic enough to be (re)used by
any SoC that integrates a switch core compatible with the Ocelot
core switch driver.  Currently all configurations are generic except
for the PCS settings that are SoC specific.  Move these out to the
Ocelot SoC/board instance.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/ethernet/mscc/ocelot.c       | 19 ++--------------
 drivers/net/ethernet/mscc/ocelot.h       |  8 ++++++-
 drivers/net/ethernet/mscc/ocelot_board.c | 29 +++++++++++++++++++++++-
 drivers/net/ethernet/mscc/ocelot_regs.c  |  4 ++--
 4 files changed, 39 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 3e7a2796c37d..2b6792ab0eda 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -455,23 +455,8 @@ static void ocelot_adjust_link(struct ocelot *ocelot, int port,
 	ocelot_port_writel(ocelot_port, DEV_MAC_HDX_CFG_LATE_COL_POS(67),
 			   DEV_MAC_HDX_CFG);
 
-	/* Disable HDX fast control */
-	ocelot_port_writel(ocelot_port, DEV_PORT_MISC_HDX_FAST_DIS,
-			   DEV_PORT_MISC);
-
-	/* SGMII only for now */
-	ocelot_port_writel(ocelot_port, PCS1G_MODE_CFG_SGMII_MODE_ENA,
-			   PCS1G_MODE_CFG);
-	ocelot_port_writel(ocelot_port, PCS1G_SD_CFG_SD_SEL, PCS1G_SD_CFG);
-
-	/* Enable PCS */
-	ocelot_port_writel(ocelot_port, PCS1G_CFG_PCS_ENA, PCS1G_CFG);
-
-	/* No aneg on SGMII */
-	ocelot_port_writel(ocelot_port, 0, PCS1G_ANEG_CFG);
-
-	/* No loopback */
-	ocelot_port_writel(ocelot_port, 0, PCS1G_LB_CFG);
+	if (ocelot->ops->pcs_init)
+		ocelot->ops->pcs_init(ocelot, port);
 
 	/* Set Max Length and maximum tags allowed */
 	ocelot_port_writel(ocelot_port, VLAN_ETH_FRAME_LEN,
diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
index b5802cea7cc4..7e28434c22c1 100644
--- a/drivers/net/ethernet/mscc/ocelot.h
+++ b/drivers/net/ethernet/mscc/ocelot.h
@@ -435,13 +435,19 @@ enum ocelot_tag_prefix {
 };
 
 struct ocelot_port;
+struct ocelot;
 
 struct ocelot_stat_layout {
 	u32 offset;
 	char name[ETH_GSTRING_LEN];
 };
 
+struct ocelot_ops {
+	void (*pcs_init)(struct ocelot *ocelot, int port);
+};
+
 struct ocelot {
+	const struct ocelot_ops *ops;
 	struct device *dev;
 
 	struct regmap *targets[TARGET_MAX];
@@ -553,7 +559,7 @@ struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res);
 
 int ocelot_init(struct ocelot *ocelot);
 void ocelot_deinit(struct ocelot *ocelot);
-int ocelot_chip_init(struct ocelot *ocelot);
+int ocelot_chip_init(struct ocelot *ocelot, const struct ocelot_ops *ops);
 int ocelot_probe_port(struct ocelot *ocelot, u8 port,
 		      void __iomem *regs,
 		      struct phy_device *phy);
diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c
index ddb34f17fa52..de2da6d33d43 100644
--- a/drivers/net/ethernet/mscc/ocelot_board.c
+++ b/drivers/net/ethernet/mscc/ocelot_board.c
@@ -254,6 +254,33 @@ static const struct of_device_id mscc_ocelot_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mscc_ocelot_match);
 
+static void ocelot_port_pcs_init(struct ocelot *ocelot, int port)
+{
+	struct ocelot_port *ocelot_port = ocelot->ports[port];
+
+	/* Disable HDX fast control */
+	ocelot_port_writel(ocelot_port, DEV_PORT_MISC_HDX_FAST_DIS,
+			   DEV_PORT_MISC);
+
+	/* SGMII only for now */
+	ocelot_port_writel(ocelot_port, PCS1G_MODE_CFG_SGMII_MODE_ENA,
+			   PCS1G_MODE_CFG);
+	ocelot_port_writel(ocelot_port, PCS1G_SD_CFG_SD_SEL, PCS1G_SD_CFG);
+
+	/* Enable PCS */
+	ocelot_port_writel(ocelot_port, PCS1G_CFG_PCS_ENA, PCS1G_CFG);
+
+	/* No aneg on SGMII */
+	ocelot_port_writel(ocelot_port, 0, PCS1G_ANEG_CFG);
+
+	/* No loopback */
+	ocelot_port_writel(ocelot_port, 0, PCS1G_LB_CFG);
+}
+
+static const struct ocelot_ops ocelot_ops = {
+	.pcs_init		= ocelot_port_pcs_init,
+};
+
 static int mscc_ocelot_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -315,7 +342,7 @@ static int mscc_ocelot_probe(struct platform_device *pdev)
 
 	ocelot->targets[HSIO] = hsio;
 
-	err = ocelot_chip_init(ocelot);
+	err = ocelot_chip_init(ocelot, &ocelot_ops);
 	if (err)
 		return err;
 
diff --git a/drivers/net/ethernet/mscc/ocelot_regs.c b/drivers/net/ethernet/mscc/ocelot_regs.c
index e59977d20400..d715a924108b 100644
--- a/drivers/net/ethernet/mscc/ocelot_regs.c
+++ b/drivers/net/ethernet/mscc/ocelot_regs.c
@@ -423,7 +423,7 @@ static void ocelot_pll5_init(struct ocelot *ocelot)
 		     HSIO_PLL5G_CFG2_AMPC_SEL(0x10));
 }
 
-int ocelot_chip_init(struct ocelot *ocelot)
+int ocelot_chip_init(struct ocelot *ocelot, const struct ocelot_ops *ops)
 {
 	int ret;
 
@@ -431,6 +431,7 @@ int ocelot_chip_init(struct ocelot *ocelot)
 	ocelot->stats_layout = ocelot_stats_layout;
 	ocelot->num_stats = ARRAY_SIZE(ocelot_stats_layout);
 	ocelot->shared_queue_sz = 224 * 1024;
+	ocelot->ops = ops;
 
 	ret = ocelot_regfields_init(ocelot, ocelot_regfields);
 	if (ret)
@@ -443,4 +444,3 @@ int ocelot_chip_init(struct ocelot *ocelot)
 
 	return 0;
 }
-EXPORT_SYMBOL(ocelot_chip_init);
-- 
2.17.1


  parent reply	other threads:[~2019-11-12 12:44 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-12 12:44 [PATCH net-next 00/12] DSA driver for Vitesse Felix switch Vladimir Oltean
2019-11-12 12:44 ` [PATCH net-next 01/12] net: mscc: ocelot: move resource ioremap and regmap init to common code Vladimir Oltean
2019-11-12 12:44 ` Vladimir Oltean [this message]
2019-11-12 13:31   ` [PATCH net-next 02/12] net: mscc: ocelot: filter out ocelot SoC specific PCS config from common path Andrew Lunn
2019-11-12 21:28   ` Florian Fainelli
2019-11-13  9:40   ` kbuild test robot
2019-11-12 12:44 ` [PATCH net-next 03/12] net: mscc: ocelot: move invariant configs out of adjust_link Vladimir Oltean
2019-11-12 13:35   ` Andrew Lunn
2019-11-12 13:38     ` Vladimir Oltean
2019-11-12 21:30   ` Florian Fainelli
2019-11-12 12:44 ` [PATCH net-next 04/12] net: mscc: ocelot: create a helper for changing the port MTU Vladimir Oltean
2019-11-12 13:39   ` Andrew Lunn
2019-11-12 13:41     ` Vladimir Oltean
2019-11-12 21:31   ` Florian Fainelli
2019-11-12 12:44 ` [PATCH net-next 05/12] net: mscc: ocelot: export a constant for the tag length in bytes Vladimir Oltean
2019-11-12 13:44   ` Andrew Lunn
2019-11-12 21:32   ` Florian Fainelli
2019-11-12 12:44 ` [PATCH net-next 06/12] net: mscc: ocelot: adjust MTU on the CPU port in NPI mode Vladimir Oltean
2019-11-12 13:51   ` Andrew Lunn
2019-11-12 13:52     ` Vladimir Oltean
2019-11-12 13:57       ` Andrew Lunn
2019-11-12 21:32   ` Florian Fainelli
2019-11-12 12:44 ` [PATCH net-next 07/12] net: mscc: ocelot: separate the implementation of switch reset Vladimir Oltean
2019-11-12 13:55   ` Andrew Lunn
2019-11-12 13:59     ` Vladimir Oltean
2019-11-13  8:57       ` Alexandre Belloni
2019-11-12 21:34   ` Florian Fainelli
2019-11-12 12:44 ` [PATCH net-next 08/12] net: mscc: ocelot: publish structure definitions to include/soc/mscc/ocelot.h Vladimir Oltean
2019-11-12 14:42   ` Andrew Lunn
2019-11-12 16:18     ` Vladimir Oltean
2019-11-12 21:36   ` Florian Fainelli
2019-11-13 12:48   ` kbuild test robot
2019-11-12 12:44 ` [PATCH net-next 09/12] net: mscc: ocelot: publish ocelot_sys.h to include/soc/mscc Vladimir Oltean
2019-11-12 21:38   ` Florian Fainelli
2019-11-12 12:44 ` [PATCH net-next 10/12] net: dsa: vitesse: move vsc73xx driver to a separate folder Vladimir Oltean
2019-11-12 13:09   ` Alexandre Belloni
2019-11-12 13:40     ` Vladimir Oltean
2019-11-12 14:33       ` Allan W. Nielsen
2019-11-12 14:50         ` Andrew Lunn
2019-11-12 14:57           ` Allan W. Nielsen
2019-11-12 15:26             ` Vladimir Oltean
2019-11-12 19:09               ` Allan W. Nielsen
2019-11-12 19:26                 ` Vladimir Oltean
2019-11-12 19:48                   ` Allan W. Nielsen
2019-11-12 20:01                     ` Vladimir Oltean
2019-11-13  7:38                       ` Allan W. Nielsen
2019-11-13  8:47                         ` Alexandre Belloni
2019-11-12 21:49           ` Florian Fainelli
2019-11-12 12:44 ` [PATCH net-next 11/12] net: dsa: vitesse: add basic Felix switch driver Vladimir Oltean
2019-11-12 12:44 ` [PATCH net-next 12/12] net: dsa: vitesse: add tagger for Ocelot/Felix switches Vladimir Oltean
2019-11-12 21:48   ` Florian Fainelli
2019-11-13  2:14   ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191112124420.6225-3-olteanv@gmail.com \
    --to=olteanv@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=allan.nielsen@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=horatiu.vultur@microchip.com \
    --cc=jakub.kicinski@netronome.com \
    --cc=joergen.andreasen@microchip.com \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@gmail.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).