From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Taehee Yoo <ap420073@gmail.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org, bpf@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 192/237] net: bpfilter: fix iptables failure if bpfilter_umh is disabled
Date: Sat, 16 Nov 2019 10:40:27 -0500 [thread overview]
Message-ID: <20191116154113.7417-192-sashal@kernel.org> (raw)
In-Reply-To: <20191116154113.7417-1-sashal@kernel.org>
From: Taehee Yoo <ap420073@gmail.com>
[ Upstream commit 97adaddaa6db7a8af81b9b11e30cbe3628cd6700 ]
When iptables command is executed, ip_{set/get}sockopt() try to upload
bpfilter.ko if bpfilter is enabled. if it couldn't find bpfilter.ko,
command is failed.
bpfilter.ko is generated if CONFIG_BPFILTER_UMH is enabled.
ip_{set/get}sockopt() only checks CONFIG_BPFILTER.
So that if CONFIG_BPFILTER is enabled and CONFIG_BPFILTER_UMH is disabled,
iptables command is always failed.
test config:
CONFIG_BPFILTER=y
# CONFIG_BPFILTER_UMH is not set
test command:
%iptables -L
iptables: No chain/target/match by that name.
Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv4/ip_sockglue.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index b7a26120d5521..82f341e84faec 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1244,7 +1244,7 @@ int ip_setsockopt(struct sock *sk, int level,
return -ENOPROTOOPT;
err = do_ip_setsockopt(sk, level, optname, optval, optlen);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_SET_REPLACE &&
optname < BPFILTER_IPT_SET_MAX)
err = bpfilter_ip_set_sockopt(sk, optname, optval, optlen);
@@ -1557,7 +1557,7 @@ int ip_getsockopt(struct sock *sk, int level,
int err;
err = do_ip_getsockopt(sk, level, optname, optval, optlen, 0);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_GET_INFO &&
optname < BPFILTER_IPT_GET_MAX)
err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
@@ -1594,7 +1594,7 @@ int compat_ip_getsockopt(struct sock *sk, int level, int optname,
err = do_ip_getsockopt(sk, level, optname, optval, optlen,
MSG_CMSG_COMPAT);
-#ifdef CONFIG_BPFILTER
+#if IS_ENABLED(CONFIG_BPFILTER_UMH)
if (optname >= BPFILTER_IPT_SO_GET_INFO &&
optname < BPFILTER_IPT_GET_MAX)
err = bpfilter_ip_get_sockopt(sk, optname, optval, optlen);
--
2.20.1
next prev parent reply other threads:[~2019-11-16 16:18 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191116154113.7417-1-sashal@kernel.org>
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 016/237] mt76: do not store aggregation sequence number for null-data frames Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 017/237] mt76x0: phy: fix restore phase in mt76x0_phy_recalibrate_after_assoc Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 018/237] brcmsmac: AP mode: update beacon when TIM changes Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 019/237] ath10k: set probe request oui during driver start Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 020/237] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 037/237] net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update Sasha Levin
2019-11-16 15:37 ` [PATCH AUTOSEL 4.19 044/237] qed: Align local and global PTT to propagate through the APIs Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 046/237] nfp: bpf: protect against mis-initializing atomic counters Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 066/237] net: dsa: mv88e6xxx: Fix 88E6141/6341 2500mbps SERDES speed Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 067/237] net: fix warning in af_unix Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 068/237] net: ena: Fix Kconfig dependency on X86 Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 079/237] sctp: use sk_wmem_queued to check for writable space Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 081/237] selftests/bpf: fix file resource leak in load_kallsyms Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 082/237] SUNRPC: Fix a compile warning for cmpxchg64() Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 083/237] sunrpc: safely reallow resvport min/max inversion Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 084/237] atm: zatm: Fix empty body Clang warnings Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 096/237] selftests/bpf: fix return value comparison for tests in test_libbpf.sh Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 097/237] tools: bpftool: fix completion for "bpftool map update" Sasha Levin
2019-11-16 15:38 ` [PATCH AUTOSEL 4.19 100/237] libceph: don't consume a ref on pagelist in ceph_msg_data_add_pagelist() Sasha Levin
2019-11-16 16:23 ` Ilya Dryomov
2019-11-25 14:06 ` Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 106/237] mISDN: Fix type of switch control variable in ctrl_teimanager Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 107/237] qlcnic: fix a return in qlcnic_dcb_get_capability() Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 108/237] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 113/237] net: socionext: Stop PHY before resetting netsec Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 123/237] net: ethernet: cadence: fix socket buffer corruption problem Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 124/237] bpf: devmap: fix wrong interface selection in notifier_call Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 125/237] bpf, btf: fix a missing check bug in btf_parse Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 127/237] sparc64: Rework xchg() definition to avoid warnings Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 134/237] macsec: update operstate when lower device changes Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 135/237] macsec: let the administrator set UP state even if lowerdev is down Sasha Levin
2019-11-16 15:39 ` [PATCH AUTOSEL 4.19 142/237] ipv4/igmp: fix v1/v2 switchback timeout based on rfc3376, 8.12 Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 166/237] igb: shorten maximum PHC timecounter update interval Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 167/237] fm10k: ensure completer aborts are marked as non-fatal after a resume Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 168/237] net: hns3: bugfix for buffer not free problem during resetting Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 169/237] net: hns3: bugfix for reporting unknown vector0 interrupt repeatly problem Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 170/237] net: hns3: bugfix for is_valid_csq_clean_head() Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 171/237] net: hns3: bugfix for hclge_mdio_write and hclge_mdio_read Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 172/237] ntb_netdev: fix sleep time mismatch Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 183/237] net: do not abort bulk send on BQL status Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 186/237] openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 191/237] sock_diag: fix autoloading of the raw_diag module Sasha Levin
2019-11-16 15:40 ` Sasha Levin [this message]
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 196/237] wil6210: fix debugfs memory access alignment Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 197/237] wil6210: fix L2 RX status handling Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 198/237] wil6210: fix RGF_CAF_ICR address for Talyn-MB Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 199/237] wil6210: fix locking in wmi_call Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 200/237] ath10k: snoc: fix unbalanced clock error handling Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 201/237] wlcore: Fix the return value in case of error in 'wlcore_vendor_cmd_smart_config_start()' Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 202/237] rtl8xxxu: Fix missing break in switch Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 203/237] brcmsmac: never log "tid x is not agg'able" by default Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 204/237] wireless: airo: potential buffer overflow in sprintf() Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 205/237] rtlwifi: rtl8192de: Fix misleading REG_MCUFWDL information Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 206/237] net: dsa: bcm_sf2: Turn on PHY to allow successful registration Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 218/237] vrf: mark skb for multicast or link-local as enslaved to VRF Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 221/237] net: bcmgenet: return correct value 'ret' from bcmgenet_power_down Sasha Levin
2019-11-16 15:40 ` [PATCH AUTOSEL 4.19 222/237] sock: Reset dst when changing sk_mark via setsockopt Sasha Levin
2019-11-16 15:41 ` [PATCH AUTOSEL 4.19 225/237] tools: bpftool: pass an argument to silence open_obj_pinned() Sasha Levin
2019-11-16 15:41 ` [PATCH AUTOSEL 4.19 226/237] cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces Sasha Levin
2019-11-16 15:41 ` [PATCH AUTOSEL 4.19 236/237] ipv6: Fix handling of LLA with VRF and sockets bound to VRF Sasha Levin
2019-11-16 15:41 ` [PATCH AUTOSEL 4.19 237/237] cfg80211: call disconnect_wk when AP stops Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191116154113.7417-192-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ap420073@gmail.com \
--cc=bpf@vger.kernel.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).