netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [ANNOUNCE] iproute2 5.4
Date: Mon, 25 Nov 2019 08:17:37 -0800	[thread overview]
Message-ID: <20191125081737.2ff4a7ca@hermes.lan> (raw)

The 5.4 kernel has been released, and the last patches have
been applied to iproute2.

Not a lot of changes in this release, most are related to fixing output
formatting and documentation.

Download:
    https://www.kernel.org/pub/linux/utils/net/iproute2/iproute2-5.4.0.tar.gz

Repository for upcoming release:
    git://git.kernel.org/pub/scm/network/iproute2/iproute2.git

And future release (net-next):
    git://git.kernel.org/pub/scm/network/iproute2/iproute2-next.git

Thanks for all the contributions.

Report problems (or enhancements) to the netdev@vger.kernel.org mailing list.

---
Andrea Claudi (4):
      tunnel: factorize printout of GRE key and flags
      ip tunnel: add json output
      bpf: replace snprintf with asprintf when dealing with long buffers
      tc: fix segmentation fault on gact action

Aya Levin (3):
      devlink: Add helper for left justification print
      devlink: Left justification on FMSG output
      devlink: Fix inconsistency between command input and output

Damien Robert (1):
      man: add reference to `ip route add encap ... src`

David Ahern (3):
      Import tc_act/tc_ct.h uapi file
      Update kernel headers
      Update kernel headers

David Dai (1):
      iproute2-next: police: support 64bit rate and peakrate in tc utility

Dirk van der Merwe (2):
      devlink: add 'reset_dev_on_drv_probe' devlink param
      devlink: unknown 'fw_load_policy' string validation

Donald Sharp (1):
      ip nexthop: Allow flush|list operations to specify a specific protocol

Eli Britstein (5):
      tc_util: introduce a function to print JSON/non-JSON masked numbers
      tc_util: add an option to print masked numbers with/without a newline
      tc: flower: fix newline prints for ct-mark and ct-zone
      tc_util: fix JSON prints for ct-mark and ct-zone
      tc: flower: fix output for ip tos and ttl

Florent Fourcot (1):
      man: remove "defaut group" sentence on ip link

Gal Pressman (1):
      rdma: Add driver QP type string

Guillaume Nault (1):
      man: remove ppp from list of devices not allowed to change netns

Hritik Vijay (1):
      ss: show header for --processes/-p

Ido Schimmel (4):
      devlink: Increase number of supported options
      devlink: Add devlink trap set and show commands
      devlink: Add devlink trap group set and show commands
      devlink: Add man page for devlink-trap

Jakub Kicinski (1):
      devlink: require resource parameters

Jiri Pirko (3):
      devlink: implement flash update status monitoring
      devlink: implement flash status monitoring
      devlink: add reload failed indication

Julien Fortin (1):
      ip: fix ip route show json output for multipath nexthops

Michał Łyszczek (3):
      ipnetns: do not check netns NAME when -all is specified
      rdma/sys.c: fix possible out-of-bound array access
      libnetlink.c, ss.c: properly handle fread() errors

Nicolas Dichtel (3):
      ipnetns: enable to dump nsid conversion table
      ip-netns.8: document the 'auto' keyword of 'ip netns set'
      ip-netns.8: document target-nsid and nsid options of list-id

Paul Blakey (3):
      tc: add NLA_F_NESTED flag to all actions options nested block
      tc: Introduce tc ct action
      tc: flower: Add matching on conntrack info

Roman Mashak (2):
      man: tc-ematch.8: update list of filter using extended matches
      man: tc-ematch.8: documented canid() ematch rule

Stephen Hemminger (12):
      uapi: update headers from 5.4-rc
      uapi: update btf from 5.4-rc1
      examples: remove out of date cbq stuff
      examples: remove gaiconf
      examples: remove diffserv
      remove out of date README
      don't install examples
      uapi: SPDX license updates
      uapi: devlink.h health timestamp
      remove no longer useful README for lnstat
      netem: remove redundant README
      v5.4.0

Thomas Haller (1):
      man: add note to ip-macsec manual about necessary key management

Vedang Patel (4):
      etf: Add skip_sock_check
      taprio: add support for setting txtime_delay.
      tc: etf: Add documentation for skip_sock_check.
      tc: taprio: Update documentation

Vinicius Costa Gomes (1):
      taprio: Add support for setting flags

Vlad Buslov (1):
      tc: remove duplicated NEXT_ARG_FWD() in parse_ct()


             reply	other threads:[~2019-11-25 16:17 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-25 16:17 Stephen Hemminger [this message]
2019-11-25 19:21 ` [ANNOUNCE] iproute2 5.4 Christian Hesse
2019-11-25 20:11   ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191125081737.2ff4a7ca@hermes.lan \
    --to=stephen@networkplumber.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).