[PATCH AUTOSEL 4.9 09/91] rtlwifi: prevent memory leak in rtl_usb_probe

[PATCH AUTOSEL 4.9 09/91] rtlwifi: prevent memory leak in rtl_usb_probe

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ]

In rtl_usb_probe if allocation for usb_data fails the allocated hw
should be released. In addition the allocated rtlpriv->usb_data should
be released on error handling path.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index ae0c48f3c2bc0..1f02461de261c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1088,8 +1088,10 @@ int rtl_usb_probe(struct usb_interface *intf,
 	rtlpriv->hw = hw;
 	rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32),
 				    GFP_KERNEL);
-	if (!rtlpriv->usb_data)
+	if (!rtlpriv->usb_data) {
+		ieee80211_free_hw(hw);
 		return -ENOMEM;
+	}
 
 	/* this spin lock must be initialized early */
 	spin_lock_init(&rtlpriv->locks.usb_lock);
@@ -1152,6 +1154,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 	_rtl_usb_io_handler_release(hw);
 	usb_put_dev(udev);
 	complete(&rtlpriv->firmware_loading_complete);
+	kfree(rtlpriv->usb_data);
 	return -ENODEV;
 }
 EXPORT_SYMBOL(rtl_usb_probe);
-- 
2.20.1

[PATCH AUTOSEL 4.9 10/91] libertas: fix a potential NULL pointer dereference

[Sasha Levin]

From: Allen Pais <allen.pais@oracle.com>

[ Upstream commit 7da413a18583baaf35dd4a8eb414fa410367d7f2 ]

alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.

Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas/if_sdio.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/marvell/libertas/if_sdio.c b/drivers/net/wireless/marvell/libertas/if_sdio.c
index 06a57c7089920..44da911c9a1a8 100644
--- a/drivers/net/wireless/marvell/libertas/if_sdio.c
+++ b/drivers/net/wireless/marvell/libertas/if_sdio.c
@@ -1229,6 +1229,10 @@ static int if_sdio_probe(struct sdio_func *func,
 
 	spin_lock_init(&card->lock);
 	card->workqueue = alloc_workqueue("libertas_sdio", WQ_MEM_RECLAIM, 0);
+	if (unlikely(!card->workqueue)) {
+		ret = -ENOMEM;
+		goto err_queue;
+	}
 	INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
 	init_waitqueue_head(&card->pwron_waitq);
 
@@ -1282,6 +1286,7 @@ static int if_sdio_probe(struct sdio_func *func,
 	lbs_remove_card(priv);
 free:
 	destroy_workqueue(card->workqueue);
+err_queue:
 	while (card->packets) {
 		packet = card->packets;
 		card->packets = card->packets->next;
-- 
2.20.1

[PATCH AUTOSEL 4.9 24/91] mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit d10dcb615c8e29d403a24d35f8310a7a53e3050c ]

In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release for skb and
card->evtbd_ring_vbase is added.

Fixes: 0732484b47b5 ("mwifiex: separate ring initialization and ring creation routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/pcie.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index cb681b265b108..38d45a77c06ba 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -632,8 +632,11 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)
 		skb_put(skb, MAX_EVENT_SIZE);
 
 		if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE,
-					   PCI_DMA_FROMDEVICE))
+					   PCI_DMA_FROMDEVICE)) {
+			kfree_skb(skb);
+			kfree(card->evtbd_ring_vbase);
 			return -1;
+		}
 
 		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 36/91] Bluetooth: hci_core: fix init for HCI_USER_CHANNEL

[Sasha Levin]

From: Mattijs Korpershoek <mkorpershoek@baylibre.com>

[ Upstream commit eb8c101e28496888a0dcfe16ab86a1bee369e820 ]

During the setup() stage, HCI device drivers expect the chip to
acknowledge its setup() completion via vendor specific frames.

If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode,
the vendor specific frames are never tranmitted to the driver, as
they are filtered in hci_rx_work().

Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive
frames if the HCI device is is HCI_INIT state.

[1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html

Fixes: 23500189d7e0 ("Bluetooth: Introduce new HCI socket channel for user operation")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 4bd72d2fe4150..a70b078ceb3ca 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -4180,7 +4180,14 @@ static void hci_rx_work(struct work_struct *work)
 			hci_send_to_sock(hdev, skb);
 		}
 
-		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
+		/* If the device has been opened in HCI_USER_CHANNEL,
+		 * the userspace has exclusive access to device.
+		 * When device is HCI_INIT, we still need to process
+		 * the data packets to the driver in order
+		 * to complete its setup().
+		 */
+		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+		    !test_bit(HCI_INIT, &hdev->flags)) {
 			kfree_skb(skb);
 			continue;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.9 40/91] rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot

[Sasha Levin]

From: Chris Chiu <chiu@endlessm.com>

[ Upstream commit 0eeb91ade90ce06d2fa1e2fcb55e3316b64c203c ]

The RTL8723BU has problems connecting to AP after each warm reboot.
Sometimes it returns no scan result, and in most cases, it fails
the authentication for unknown reason. However, it works totally
fine after cold reboot.

Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE
for cold reboot and warm reboot, the registers imply that the MAC
is already powered and thus some procedures are skipped during
driver initialization. Double checked the vendor driver, it reads
the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any
during initialization based on them. This commit only tells the
RTL8723BU to do full initialization without checking MAC status.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h       | 1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 +
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  | 3 +++
 3 files changed, 5 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index 08d587a342d32..9143b173935da 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1348,6 +1348,7 @@ struct rtl8xxxu_fileops {
 	u8 has_s0s1:1;
 	u8 has_tx_report:1;
 	u8 gen2_thermal_meter:1;
+	u8 needs_full_init:1;
 	u32 adda_1t_init;
 	u32 adda_1t_path_on;
 	u32 adda_2t_path_on_a;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
index 02b8ddd98a95d..f51ee88d692b1 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c
@@ -1673,6 +1673,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = {
 	.has_s0s1 = 1,
 	.has_tx_report = 1,
 	.gen2_thermal_meter = 1,
+	.needs_full_init = 1,
 	.adda_1t_init = 0x01c00014,
 	.adda_1t_path_on = 0x01c00014,
 	.adda_2t_path_on_a = 0x01c00014,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index e78545d4add3c..6d34d442294ac 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -3905,6 +3905,9 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	else
 		macpower = true;
 
+	if (fops->needs_full_init)
+		macpower = false;
+
 	ret = fops->power_on(priv);
 	if (ret < 0) {
 		dev_warn(dev, "%s: Failed power on\n", __func__);
-- 
2.20.1

[PATCH AUTOSEL 4.9 47/91] Bluetooth: Fix advertising duplicated flags

[Sasha Levin]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

[ Upstream commit 6012b9346d8959194c239fd60a62dfec98d43048 ]

Instances may have flags set as part of its data in which case the code
should not attempt to add it again otherwise it can cause duplication:

< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
        Handle: 0x00
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x06
        Flags: 0x04
          BR/EDR Not Supported
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_request.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 1015d9c8d97dd..4a89e121d6627 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -1093,6 +1093,14 @@ static u8 create_instance_adv_data(struct hci_dev *hdev, u8 instance, u8 *ptr)
 
 	instance_flags = get_adv_instance_flags(hdev, instance);
 
+	/* If instance already has the flags set skip adding it once
+	 * again.
+	 */
+	if (adv_instance && eir_get_data(adv_instance->adv_data,
+					 adv_instance->adv_data_len, EIR_FLAGS,
+					 NULL))
+		goto skip_flags;
+
 	/* The Add Advertising command allows userspace to set both the general
 	 * and limited discoverable flags.
 	 */
@@ -1125,6 +1133,7 @@ static u8 create_instance_adv_data(struct hci_dev *hdev, u8 instance, u8 *ptr)
 		}
 	}
 
+skip_flags:
 	if (adv_instance) {
 		memcpy(ptr, adv_instance->adv_data,
 		       adv_instance->adv_data_len);
-- 
2.20.1

[PATCH AUTOSEL 4.9 48/91] bnx2x: Fix PF-VF communication over multi-cos queues.

[Sasha Levin]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit dc5a3d79c345871439ffe72550b604fcde9770e1 ]

PF driver doesn't enable tx-switching for all cos queues/clients,
which causes packets drop from PF to VF. Fix this by enabling
tx-switching on all cos queues/clients.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_sriov.c    | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index c6e059119b22e..e8a09d0afe1c9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2376,15 +2376,21 @@ static int bnx2x_set_pf_tx_switching(struct bnx2x *bp, bool enable)
 	/* send the ramrod on all the queues of the PF */
 	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
+		int tx_idx;
 
 		/* Set the appropriate Queue object */
 		q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
 
-		/* Update the Queue state */
-		rc = bnx2x_queue_state_change(bp, &q_params);
-		if (rc) {
-			BNX2X_ERR("Failed to configure Tx switching\n");
-			return rc;
+		for (tx_idx = FIRST_TX_COS_INDEX;
+		     tx_idx < fp->max_cos; tx_idx++) {
+			q_params.params.update.cid_index = tx_idx;
+
+			/* Update the Queue state */
+			rc = bnx2x_queue_state_change(bp, &q_params);
+			if (rc) {
+				BNX2X_ERR("Failed to configure Tx switching\n");
+				return rc;
+			}
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 51/91] rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt()

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 5174f1e41074b5186608badc2e89441d021e8c08 ]

This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with
Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a
single memory leak during probe:

unreferenced object 0xec13ee40 (size 176):
  comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164
    [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common]
    [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu]
    [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi]
    [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211]
    [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211]
    [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211]
    [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211]
    [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211]
    [<ac5fcae4>] process_one_work+0x22c/0x564
    [<f5e6d3b6>] worker_thread+0x44/0x5d8
    [<82c7b073>] kthread+0x150/0x154
    [<b43e1b7d>] ret_from_fork+0x14/0x2c
    [<794dff30>] 0x0

It is because 8192cu doesn't implement usb_cmd_send_packet(), and this
patch just frees the skb within the function to resolve memleak problem
by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download
command packet for firmware via the function, applying this patch doesn't
affect driver behavior.

Reported-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
index ae8f055483fac..39a6bd314ca3b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -1576,6 +1576,8 @@ static bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
    * This is maybe necessary:
    * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
    */
+	dev_kfree_skb(skb);
+
 	return true;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 64/91] ath10k: fix get invalid tx rate for Mesh metric

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ]

ath10k does not provide transmit rate info per MSDU
in tx completion, mark that as -1 so mac80211
will ignore the rates. This fixes mac80211 update Mesh
link metric with invalid transmit rate info.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035

Signed-off-by: Hou Bao Hou <houbao@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 9852c5d51139e..beeb6be06939b 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -99,6 +99,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 
 	info = IEEE80211_SKB_CB(msdu);
 	memset(&info->status, 0, sizeof(info->status));
+	info->status.rates[0].idx = -1;
+
 	trace_ath10k_txrx_tx_unref(ar, tx_done->msdu_id);
 
 	if (tx_done->status == HTT_TX_COMPL_STATE_DISCARD) {
-- 
2.20.1

[PATCH AUTOSEL 4.9 71/91] net: bcmgenet: Add RGMII_RXID support

[Sasha Levin]

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit da38802211cc3fd294211a642932edb09e3af632 ]

This adds the missing support for the PHY mode RGMII_RXID.
It's necessary for the Raspberry Pi 4.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index b0b9feeb173b3..254d603eae53a 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -318,6 +318,11 @@ int bcmgenet_mii_config(struct net_device *dev)
 		bcmgenet_sys_writel(priv,
 				    PORT_MODE_EXT_GPHY, SYS_PORT_CTRL);
 		break;
+
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		phy_name = "external RGMII (RX delay)";
+		port_ctrl = PORT_MODE_EXT_GPHY;
+		break;
 	default:
 		dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface);
 		return -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 4.9 76/91] iwlwifi: mvm: fix unaligned read of rx_pkt_status

[Sasha Levin]

From: Wang Xuerui <wangxuerui@qiniu.com>

[ Upstream commit c5aaa8be29b25dfe1731e9a8b19fd91b7b789ee3 ]

This is present since the introduction of iwlmvm.
Example stack trace on MIPS:

[<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm]
[<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi]

Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the
problem. No other unaligned accesses are spotted yet.

Signed-off-by: Wang Xuerui <wangxuerui@qiniu.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
index b78e60eb600f1..d0aa4d0a5537e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rx.c
@@ -62,6 +62,7 @@
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *****************************************************************************/
+#include <asm/unaligned.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include "iwl-trans.h"
@@ -289,7 +290,7 @@ void iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct napi_struct *napi,
 	rx_res = (struct iwl_rx_mpdu_res_start *)pkt->data;
 	hdr = (struct ieee80211_hdr *)(pkt->data + sizeof(*rx_res));
 	len = le16_to_cpu(rx_res->byte_count);
-	rx_pkt_status = le32_to_cpup((__le32 *)
+	rx_pkt_status = get_unaligned_le32((__le32 *)
 		(pkt->data + sizeof(*rx_res) + len));
 
 	/* Dont use dev_alloc_skb(), we'll have enough headroom once
-- 
2.20.1

[PATCH AUTOSEL 4.9 83/91] iwlwifi: check kasprintf() return value

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 5974fbb5e10b018fdbe3c3b81cb4cc54e1105ab9 ]

kasprintf() can fail, we should check the return value.

Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger")
Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/dvm/led.c | 3 +++
 drivers/net/wireless/intel/iwlwifi/mvm/led.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/led.c b/drivers/net/wireless/intel/iwlwifi/dvm/led.c
index 1bbd17ada9747..20e16c4239901 100644
--- a/drivers/net/wireless/intel/iwlwifi/dvm/led.c
+++ b/drivers/net/wireless/intel/iwlwifi/dvm/led.c
@@ -185,6 +185,9 @@ void iwl_leds_init(struct iwl_priv *priv)
 
 	priv->led.name = kasprintf(GFP_KERNEL, "%s-led",
 				   wiphy_name(priv->hw->wiphy));
+	if (!priv->led.name)
+		return;
+
 	priv->led.brightness_set = iwl_led_brightness_set;
 	priv->led.blink_set = iwl_led_blink_set;
 	priv->led.max_brightness = 1;
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/led.c b/drivers/net/wireless/intel/iwlwifi/mvm/led.c
index 1e51fbe95f7c9..73c351a641875 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/led.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/led.c
@@ -109,6 +109,9 @@ int iwl_mvm_leds_init(struct iwl_mvm *mvm)
 
 	mvm->led.name = kasprintf(GFP_KERNEL, "%s-led",
 				   wiphy_name(mvm->hw->wiphy));
+	if (!mvm->led.name)
+		return -ENOMEM;
+
 	mvm->led.brightness_set = iwl_led_brightness_set;
 	mvm->led.max_brightness = 1;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 91/91] net: phy: initialise phydev speed and duplex sanely

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit a5d66f810061e2dd70fb7a108dcd14e535bc639f ]

When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.

There is a window at initialisation time where we may report link
down using the 0/-1 values.  Tidy this up and use the predefined
constants, so debug doesn't complain with:

"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"

when the speed and duplex settings are printed.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5c2c72b1ef8b4..3289fd910c4a6 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -324,8 +324,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 	mdiodev->device_free = phy_mdio_device_free;
 	mdiodev->device_remove = phy_mdio_device_remove;
 
-	dev->speed = 0;
-	dev->duplex = -1;
+	dev->speed = SPEED_UNKNOWN;
+	dev->duplex = DUPLEX_UNKNOWN;
 	dev->pause = 0;
 	dev->asym_pause = 0;
 	dev->link = 1;
-- 
2.20.1