[PATCH AUTOSEL 4.4 06/71] rtlwifi: prevent memory leak in rtl_usb_probe

[PATCH AUTOSEL 4.4 06/71] rtlwifi: prevent memory leak in rtl_usb_probe

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ]

In rtl_usb_probe if allocation for usb_data fails the allocated hw
should be released. In addition the allocated rtlpriv->usb_data should
be released on error handling path.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index ad8390d2997b2..9408c1f8e3977 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1094,8 +1094,10 @@ int rtl_usb_probe(struct usb_interface *intf,
 	rtlpriv->hw = hw;
 	rtlpriv->usb_data = kzalloc(RTL_USB_MAX_RX_COUNT * sizeof(u32),
 				    GFP_KERNEL);
-	if (!rtlpriv->usb_data)
+	if (!rtlpriv->usb_data) {
+		ieee80211_free_hw(hw);
 		return -ENOMEM;
+	}
 
 	/* this spin lock must be initialized early */
 	spin_lock_init(&rtlpriv->locks.usb_lock);
@@ -1158,6 +1160,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 	_rtl_usb_io_handler_release(hw);
 	usb_put_dev(udev);
 	complete(&rtlpriv->firmware_loading_complete);
+	kfree(rtlpriv->usb_data);
 	return -ENODEV;
 }
 EXPORT_SYMBOL(rtl_usb_probe);
-- 
2.20.1

[PATCH AUTOSEL 4.4 19/71] mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit d10dcb615c8e29d403a24d35f8310a7a53e3050c ]

In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release for skb and
card->evtbd_ring_vbase is added.

Fixes: 0732484b47b5 ("mwifiex: separate ring initialization and ring creation routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mwifiex/pcie.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 268e50ba88a51..4c0a656928996 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -577,8 +577,11 @@ static int mwifiex_pcie_init_evt_ring(struct mwifiex_adapter *adapter)
 		skb_put(skb, MAX_EVENT_SIZE);
 
 		if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE,
-					   PCI_DMA_FROMDEVICE))
+					   PCI_DMA_FROMDEVICE)) {
+			kfree_skb(skb);
+			kfree(card->evtbd_ring_vbase);
 			return -1;
+		}
 
 		buf_pa = MWIFIEX_SKB_DMA_ADDR(skb);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 29/71] Bluetooth: hci_core: fix init for HCI_USER_CHANNEL

[Sasha Levin]

From: Mattijs Korpershoek <mkorpershoek@baylibre.com>

[ Upstream commit eb8c101e28496888a0dcfe16ab86a1bee369e820 ]

During the setup() stage, HCI device drivers expect the chip to
acknowledge its setup() completion via vendor specific frames.

If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode,
the vendor specific frames are never tranmitted to the driver, as
they are filtered in hci_rx_work().

Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive
frames if the HCI device is is HCI_INIT state.

[1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html

Fixes: 23500189d7e0 ("Bluetooth: Introduce new HCI socket channel for user operation")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 5d0b1358c7547..4bce3ef2c392a 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -4459,7 +4459,14 @@ static void hci_rx_work(struct work_struct *work)
 			hci_send_to_sock(hdev, skb);
 		}
 
-		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
+		/* If the device has been opened in HCI_USER_CHANNEL,
+		 * the userspace has exclusive access to device.
+		 * When device is HCI_INIT, we still need to process
+		 * the data packets to the driver in order
+		 * to complete its setup().
+		 */
+		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+		    !test_bit(HCI_INIT, &hdev->flags)) {
 			kfree_skb(skb);
 			continue;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.4 37/71] bnx2x: Fix PF-VF communication over multi-cos queues.

[Sasha Levin]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit dc5a3d79c345871439ffe72550b604fcde9770e1 ]

PF driver doesn't enable tx-switching for all cos queues/clients,
which causes packets drop from PF to VF. Fix this by enabling
tx-switching on all cos queues/clients.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_sriov.c    | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 5780830f78ad2..55a7774e8ef5c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -2384,15 +2384,21 @@ static int bnx2x_set_pf_tx_switching(struct bnx2x *bp, bool enable)
 	/* send the ramrod on all the queues of the PF */
 	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
+		int tx_idx;
 
 		/* Set the appropriate Queue object */
 		q_params.q_obj = &bnx2x_sp_obj(bp, fp).q_obj;
 
-		/* Update the Queue state */
-		rc = bnx2x_queue_state_change(bp, &q_params);
-		if (rc) {
-			BNX2X_ERR("Failed to configure Tx switching\n");
-			return rc;
+		for (tx_idx = FIRST_TX_COS_INDEX;
+		     tx_idx < fp->max_cos; tx_idx++) {
+			q_params.params.update.cid_index = tx_idx;
+
+			/* Update the Queue state */
+			rc = bnx2x_queue_state_change(bp, &q_params);
+			if (rc) {
+				BNX2X_ERR("Failed to configure Tx switching\n");
+				return rc;
+			}
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 39/71] rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt()

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 5174f1e41074b5186608badc2e89441d021e8c08 ]

This leak was found by testing the EDIMAX EW-7612 on Raspberry Pi 3B+ with
Linux 5.4-rc5 (multi_v7_defconfig + rtlwifi + kmemleak) and noticed a
single memory leak during probe:

unreferenced object 0xec13ee40 (size 176):
  comm "kworker/u8:1", pid 36, jiffies 4294939321 (age 5580.790s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<fc1bbb3e>] __netdev_alloc_skb+0x9c/0x164
    [<863dfa6e>] rtl92c_set_fw_rsvdpagepkt+0x254/0x340 [rtl8192c_common]
    [<9572be0d>] rtl92cu_set_hw_reg+0xf48/0xfa4 [rtl8192cu]
    [<116df4d8>] rtl_op_bss_info_changed+0x234/0x96c [rtlwifi]
    [<8933575f>] ieee80211_bss_info_change_notify+0xb8/0x264 [mac80211]
    [<d4061e86>] ieee80211_assoc_success+0x934/0x1798 [mac80211]
    [<e55adb56>] ieee80211_rx_mgmt_assoc_resp+0x174/0x314 [mac80211]
    [<5974629e>] ieee80211_sta_rx_queued_mgmt+0x3f4/0x7f0 [mac80211]
    [<d91091c6>] ieee80211_iface_work+0x208/0x318 [mac80211]
    [<ac5fcae4>] process_one_work+0x22c/0x564
    [<f5e6d3b6>] worker_thread+0x44/0x5d8
    [<82c7b073>] kthread+0x150/0x154
    [<b43e1b7d>] ret_from_fork+0x14/0x2c
    [<794dff30>] 0x0

It is because 8192cu doesn't implement usb_cmd_send_packet(), and this
patch just frees the skb within the function to resolve memleak problem
by now. Since 8192cu doesn't turn on fwctrl_lps that needs to download
command packet for firmware via the function, applying this patch doesn't
affect driver behavior.

Reported-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
index 34ce06441d1b6..137d7c8645dae 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c
@@ -1601,6 +1601,8 @@ static bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
    * This is maybe necessary:
    * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
    */
+	dev_kfree_skb(skb);
+
 	return true;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 51/71] ath10k: fix get invalid tx rate for Mesh metric

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 05a11003a56507023f18d3249a4d4d119c0a3e9c ]

ath10k does not provide transmit rate info per MSDU
in tx completion, mark that as -1 so mac80211
will ignore the rates. This fixes mac80211 update Mesh
link metric with invalid transmit rate info.

Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00035

Signed-off-by: Hou Bao Hou <houbao@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 6d1105ab4592b..f9d0f8372e3fd 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -96,6 +96,8 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 
 	info = IEEE80211_SKB_CB(msdu);
 	memset(&info->status, 0, sizeof(info->status));
+	info->status.rates[0].idx = -1;
+
 	trace_ath10k_txrx_tx_unref(ar, tx_done->msdu_id);
 
 	if (tx_done->discard) {
-- 
2.20.1

[PATCH AUTOSEL 4.4 57/71] net: bcmgenet: Add RGMII_RXID support

[Sasha Levin]

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit da38802211cc3fd294211a642932edb09e3af632 ]

This adds the missing support for the PHY mode RGMII_RXID.
It's necessary for the Raspberry Pi 4.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 3ad016f500b54..5c39630403a7c 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -318,6 +318,11 @@ int bcmgenet_mii_config(struct net_device *dev)
 		bcmgenet_sys_writel(priv,
 				    PORT_MODE_EXT_GPHY, SYS_PORT_CTRL);
 		break;
+
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		phy_name = "external RGMII (RX delay)";
+		port_ctrl = PORT_MODE_EXT_GPHY;
+		break;
 	default:
 		dev_err(kdev, "unknown phy mode: %d\n", priv->phy_interface);
 		return -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 4.4 64/71] iwlwifi: check kasprintf() return value

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 5974fbb5e10b018fdbe3c3b81cb4cc54e1105ab9 ]

kasprintf() can fail, we should check the return value.

Fixes: 5ed540aecc2a ("iwlwifi: use mac80211 throughput trigger")
Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/iwlwifi/dvm/led.c | 3 +++
 drivers/net/wireless/iwlwifi/mvm/led.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/dvm/led.c b/drivers/net/wireless/iwlwifi/dvm/led.c
index ca4d6692cc4eb..47e5fa70483d1 100644
--- a/drivers/net/wireless/iwlwifi/dvm/led.c
+++ b/drivers/net/wireless/iwlwifi/dvm/led.c
@@ -184,6 +184,9 @@ void iwl_leds_init(struct iwl_priv *priv)
 
 	priv->led.name = kasprintf(GFP_KERNEL, "%s-led",
 				   wiphy_name(priv->hw->wiphy));
+	if (!priv->led.name)
+		return;
+
 	priv->led.brightness_set = iwl_led_brightness_set;
 	priv->led.blink_set = iwl_led_blink_set;
 	priv->led.max_brightness = 1;
diff --git a/drivers/net/wireless/iwlwifi/mvm/led.c b/drivers/net/wireless/iwlwifi/mvm/led.c
index e3b3cf4dbd77a..948be43e4d266 100644
--- a/drivers/net/wireless/iwlwifi/mvm/led.c
+++ b/drivers/net/wireless/iwlwifi/mvm/led.c
@@ -109,6 +109,9 @@ int iwl_mvm_leds_init(struct iwl_mvm *mvm)
 
 	mvm->led.name = kasprintf(GFP_KERNEL, "%s-led",
 				   wiphy_name(mvm->hw->wiphy));
+	if (!mvm->led.name)
+		return -ENOMEM;
+
 	mvm->led.brightness_set = iwl_led_brightness_set;
 	mvm->led.max_brightness = 1;
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 71/71] net: phy: initialise phydev speed and duplex sanely

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit a5d66f810061e2dd70fb7a108dcd14e535bc639f ]

When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.

There is a window at initialisation time where we may report link
down using the 0/-1 values.  Tidy this up and use the predefined
constants, so debug doesn't complain with:

"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"

when the speed and duplex settings are printed.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index c6a87834723d1..b15eceb8b4425 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -161,8 +161,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 
 	dev->dev.release = phy_device_release;
 
-	dev->speed = 0;
-	dev->duplex = -1;
+	dev->speed = SPEED_UNKNOWN;
+	dev->duplex = DUPLEX_UNKNOWN;
 	dev->pause = 0;
 	dev->asym_pause = 0;
 	dev->link = 1;
-- 
2.20.1