From: Andrew Lunn <andrew@lunn.ch>
To: Yangbo Lu <yangbo.lu@nxp.com>
Cc: netdev@vger.kernel.org, "David S . Miller" <davem@davemloft.net>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
Richard Cochran <richardcochran@gmail.com>
Subject: Re: [PATCH] net: mscc: ocelot: support PPS signal generation
Date: Thu, 26 Dec 2019 11:58:38 +0100 [thread overview]
Message-ID: <20191226105838.GD1480@lunn.ch> (raw)
In-Reply-To: <20191226095851.24325-1-yangbo.lu@nxp.com>
On Thu, Dec 26, 2019 at 05:58:51PM +0800, Yangbo Lu wrote:
> This patch is to support PPS signal generation for Ocelot family
> switches, including VSC9959 switch.
Hi Yangbo
Please always Cc: Richard Cochran <richardcochran@gmail.com> for ptp
patches.
Andrew
>
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
> ---
> drivers/net/dsa/ocelot/felix_vsc9959.c | 2 ++
> drivers/net/ethernet/mscc/ocelot.c | 25 +++++++++++++++++++++++++
> drivers/net/ethernet/mscc/ocelot_ptp.h | 2 ++
> drivers/net/ethernet/mscc/ocelot_regs.c | 2 ++
> include/soc/mscc/ocelot.h | 2 ++
> 5 files changed, 33 insertions(+)
>
> diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
> index b9758b0..ee0ce7c 100644
> --- a/drivers/net/dsa/ocelot/felix_vsc9959.c
> +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
> @@ -287,6 +287,8 @@ static const u32 vsc9959_ptp_regmap[] = {
> REG(PTP_PIN_TOD_SEC_MSB, 0x000004),
> REG(PTP_PIN_TOD_SEC_LSB, 0x000008),
> REG(PTP_PIN_TOD_NSEC, 0x00000c),
> + REG(PTP_PIN_WF_HIGH_PERIOD, 0x000014),
> + REG(PTP_PIN_WF_LOW_PERIOD, 0x000018),
> REG(PTP_CFG_MISC, 0x0000a0),
> REG(PTP_CLK_CFG_ADJ_CFG, 0x0000a4),
> REG(PTP_CLK_CFG_ADJ_FREQ, 0x0000a8),
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index 985b46d..c0f8a9e 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -2147,6 +2147,29 @@ static struct ptp_clock_info ocelot_ptp_clock_info = {
> .adjfine = ocelot_ptp_adjfine,
> };
>
> +static void ocelot_ptp_init_pps(struct ocelot *ocelot)
> +{
> + u32 val;
> +
> + /* PPS signal generation uses CLOCK action. Together with SYNC option,
> + * a single pulse will be generated after <WAFEFORM_LOW> nanoseconds
> + * after the time of day has increased the seconds. The pulse will
> + * get a width of <WAFEFORM_HIGH> nanoseconds.
> + *
> + * In default,
> + * WAFEFORM_LOW = 0
> + * WAFEFORM_HIGH = 1us
> + */
> + ocelot_write_rix(ocelot, 0, PTP_PIN_WF_LOW_PERIOD, ALT_PPS_PIN);
> + ocelot_write_rix(ocelot, 1000, PTP_PIN_WF_HIGH_PERIOD, ALT_PPS_PIN);
> +
> + val = ocelot_read_rix(ocelot, PTP_PIN_CFG, ALT_PPS_PIN);
> + val &= ~(PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION_MASK | PTP_PIN_CFG_DOM);
> + val |= (PTP_PIN_CFG_SYNC | PTP_PIN_CFG_ACTION(PTP_PIN_ACTION_CLOCK));
> +
> + ocelot_write_rix(ocelot, val, PTP_PIN_CFG, ALT_PPS_PIN);
> +}
> +
> static int ocelot_init_timestamp(struct ocelot *ocelot)
> {
> struct ptp_clock *ptp_clock;
> @@ -2478,6 +2501,8 @@ int ocelot_init(struct ocelot *ocelot)
> "Timestamp initialization failed\n");
> return ret;
> }
> +
> + ocelot_ptp_init_pps(ocelot);
> }
>
> return 0;
> diff --git a/drivers/net/ethernet/mscc/ocelot_ptp.h b/drivers/net/ethernet/mscc/ocelot_ptp.h
> index 9ede14a..21bc744 100644
> --- a/drivers/net/ethernet/mscc/ocelot_ptp.h
> +++ b/drivers/net/ethernet/mscc/ocelot_ptp.h
> @@ -13,6 +13,8 @@
> #define PTP_PIN_TOD_SEC_MSB_RSZ PTP_PIN_CFG_RSZ
> #define PTP_PIN_TOD_SEC_LSB_RSZ PTP_PIN_CFG_RSZ
> #define PTP_PIN_TOD_NSEC_RSZ PTP_PIN_CFG_RSZ
> +#define PTP_PIN_WF_HIGH_PERIOD_RSZ PTP_PIN_CFG_RSZ
> +#define PTP_PIN_WF_LOW_PERIOD_RSZ PTP_PIN_CFG_RSZ
>
> #define PTP_PIN_CFG_DOM BIT(0)
> #define PTP_PIN_CFG_SYNC BIT(2)
> diff --git a/drivers/net/ethernet/mscc/ocelot_regs.c b/drivers/net/ethernet/mscc/ocelot_regs.c
> index b88b589..ed4dd01 100644
> --- a/drivers/net/ethernet/mscc/ocelot_regs.c
> +++ b/drivers/net/ethernet/mscc/ocelot_regs.c
> @@ -239,6 +239,8 @@ static const u32 ocelot_ptp_regmap[] = {
> REG(PTP_PIN_TOD_SEC_MSB, 0x000004),
> REG(PTP_PIN_TOD_SEC_LSB, 0x000008),
> REG(PTP_PIN_TOD_NSEC, 0x00000c),
> + REG(PTP_PIN_WF_HIGH_PERIOD, 0x000014),
> + REG(PTP_PIN_WF_LOW_PERIOD, 0x000018),
> REG(PTP_CFG_MISC, 0x0000a0),
> REG(PTP_CLK_CFG_ADJ_CFG, 0x0000a4),
> REG(PTP_CLK_CFG_ADJ_FREQ, 0x0000a8),
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index 64cbbbe..c2ab20d 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -325,6 +325,8 @@ enum ocelot_reg {
> PTP_PIN_TOD_SEC_MSB,
> PTP_PIN_TOD_SEC_LSB,
> PTP_PIN_TOD_NSEC,
> + PTP_PIN_WF_HIGH_PERIOD,
> + PTP_PIN_WF_LOW_PERIOD,
> PTP_CFG_MISC,
> PTP_CLK_CFG_ADJ_CFG,
> PTP_CLK_CFG_ADJ_FREQ,
> --
> 2.7.4
>
next prev parent reply other threads:[~2019-12-26 10:58 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-26 9:58 [PATCH] net: mscc: ocelot: support PPS signal generation Yangbo Lu
2019-12-26 10:49 ` Vladimir Oltean
2019-12-26 10:50 ` Vladimir Oltean
2019-12-26 11:21 ` Y.b. Lu
2019-12-26 11:17 ` Y.b. Lu
2019-12-26 11:44 ` Vladimir Oltean
2019-12-27 2:08 ` Richard Cochran
2019-12-27 3:51 ` Y.b. Lu
2019-12-27 15:12 ` Richard Cochran
2019-12-26 10:58 ` Andrew Lunn [this message]
2019-12-26 11:22 ` Y.b. Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191226105838.GD1480@lunn.ch \
--to=andrew@lunn.ch \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=vladimir.oltean@nxp.com \
--cc=yangbo.lu@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).