From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ben Hutchings <ben@decadent.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.4 20/25] net: qlogic: Fix error paths in ql_alloc_large_buffers()
Date: Fri, 27 Dec 2019 13:15:44 -0500 [thread overview]
Message-ID: <20191227181549.8040-20-sashal@kernel.org> (raw)
In-Reply-To: <20191227181549.8040-1-sashal@kernel.org>
From: Ben Hutchings <ben@decadent.org.uk>
[ Upstream commit cad46039e4c99812db067c8ac22a864960e7acc4 ]
ql_alloc_large_buffers() has the usual RX buffer allocation
loop where it allocates skbs and maps them for DMA. It also
treats failure as a fatal error.
There are (at least) three bugs in the error paths:
1. ql_free_large_buffers() assumes that the lrg_buf[] entry for the
first buffer that couldn't be allocated will have .skb == NULL.
But the qla_buf[] array is not zero-initialised.
2. ql_free_large_buffers() DMA-unmaps all skbs in lrg_buf[]. This is
incorrect for the last allocated skb, if DMA mapping failed.
3. Commit 1acb8f2a7a9f ("net: qlogic: Fix memory leak in
ql_alloc_large_buffers") added a direct call to dev_kfree_skb_any()
after the skb is recorded in lrg_buf[], so ql_free_large_buffers()
will double-free it.
The bugs are somewhat inter-twined, so fix them all at once:
* Clear each entry in qla_buf[] before attempting to allocate
an skb for it. This goes half-way to fixing bug 1.
* Set the .skb field only after the skb is DMA-mapped. This
fixes the rest.
Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue ...")
Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() ...")
Fixes: 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qla3xxx.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index c653b97d84d5..f2cb77c3b199 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -2752,6 +2752,9 @@ static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
int err;
for (i = 0; i < qdev->num_large_buffers; i++) {
+ lrg_buf_cb = &qdev->lrg_buf[i];
+ memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb));
+
skb = netdev_alloc_skb(qdev->ndev,
qdev->lrg_buffer_len);
if (unlikely(!skb)) {
@@ -2762,11 +2765,7 @@ static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
ql_free_large_buffers(qdev);
return -ENOMEM;
} else {
-
- lrg_buf_cb = &qdev->lrg_buf[i];
- memset(lrg_buf_cb, 0, sizeof(struct ql_rcv_buf_cb));
lrg_buf_cb->index = i;
- lrg_buf_cb->skb = skb;
/*
* We save some space to copy the ethhdr from first
* buffer
@@ -2788,6 +2787,7 @@ static int ql_alloc_large_buffers(struct ql3_adapter *qdev)
return -ENOMEM;
}
+ lrg_buf_cb->skb = skb;
dma_unmap_addr_set(lrg_buf_cb, mapaddr, map);
dma_unmap_len_set(lrg_buf_cb, maplen,
qdev->lrg_buffer_len -
--
2.20.1
next prev parent reply other threads:[~2019-12-27 18:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191227181549.8040-1-sashal@kernel.org>
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 02/25] netfilter: ctnetlink: netns exit must wait for callbacks Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 05/25] netfilter: bridge: make sure to pull arp header in br_nf_forward_arp() Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 06/25] af_packet: set defaule value for tmo Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 07/25] fjes: fix missed check in fjes_acpi_add Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 10/25] net: usb: lan78xx: Fix suspend/resume PHY register access error Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 12/25] 6pack,mkiss: fix possible deadlock Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 13/25] bnx2x: Do not handle requests from VFs after parity Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 14/25] bnx2x: Fix logic to get total no. of PFs per engine Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 15/25] net: usb: lan78xx: Fix error message format specifier Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 16/25] rfkill: Fix incorrect check to avoid NULL pointer dereference Sasha Levin
2019-12-27 18:15 ` Sasha Levin [this message]
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 21/25] net: nfc: nci: fix a possible sleep-in-atomic-context bug in nci_uart_tty_receive() Sasha Levin
2019-12-27 18:15 ` [PATCH AUTOSEL 4.4 23/25] net: hisilicon: Fix a BUG trigered by wrong bytes_compl Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191227181549.8040-20-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ben@decadent.org.uk \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).