* [PATCH net-next 1/9 v5] wan: ixp4xx_hss: fix compile-testing on 64-bit
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 2/9 v5] wan: ixp4xx_hss: prepare compile testing Linus Walleij
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
From: Arnd Bergmann <arnd@arndb.de>
Change the driver to use portable integer types to avoid
warnings during compile testing:
drivers/net/wan/ixp4xx_hss.c:863:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast]
memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
^
drivers/net/wan/ixp4xx_hss.c:979:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
&port->desc_tab_phys)))
^~~~~~~~~~~~~~~~~~~~
include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here
dma_addr_t *handle);
^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Just resending with the rest
---
drivers/net/wan/ixp4xx_hss.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index ea6ee6a608ce..e7619cec978a 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -258,7 +258,7 @@ struct port {
struct hss_plat_info *plat;
buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
struct desc *desc_tab; /* coherent */
- u32 desc_tab_phys;
+ dma_addr_t desc_tab_phys;
unsigned int id;
unsigned int clock_type, clock_rate, loopback;
unsigned int initialized, carrier;
@@ -858,7 +858,7 @@ static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
dev->stats.tx_dropped++;
return NETDEV_TX_OK;
}
- memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
+ memcpy_swab32(mem, (u32 *)((uintptr_t)skb->data & ~3), bytes / 4);
dev_kfree_skb(skb);
#endif
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 2/9 v5] wan: ixp4xx_hss: prepare compile testing
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 1/9 v5] wan: ixp4xx_hss: fix compile-testing on 64-bit Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 3/9 v5] ptp: ixp46x: move adjacent to ethernet driver Linus Walleij
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
From: Arnd Bergmann <arnd@arndb.de>
The ixp4xx_hss driver needs the platform data definition and the
system clock rate to be compiled. Move both into a new platform_data
header file.
This is a prerequisite for compile testing, but turning on compile
testing requires further patches to isolate the SoC headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Drop the change actually enabling compile testing in Kconfig
but keep the rest around so we are prepared. (Need the SoC
include changes to actually enable it.)
- Rename to "prepare"
---
arch/arm/mach-ixp4xx/goramo_mlr.c | 4 +++
arch/arm/mach-ixp4xx/include/mach/platform.h | 9 -----
drivers/net/wan/Kconfig | 3 +-
drivers/net/wan/ixp4xx_hss.c | 35 +++++++++++---------
include/linux/platform_data/wan_ixp4xx_hss.h | 17 ++++++++++
5 files changed, 43 insertions(+), 25 deletions(-)
create mode 100644 include/linux/platform_data/wan_ixp4xx_hss.h
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index a0e0b6b7dc5c..93b7afeee142 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -11,6 +11,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/platform_data/wan_ixp4xx_hss.h>
#include <linux/serial_8250.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -405,6 +406,9 @@ static void __init gmlr_init(void)
if (hw_bits & CFG_HW_HAS_HSS1)
device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+ hss_plat[0].timer_freq = ixp4xx_timer_freq;
+ hss_plat[1].timer_freq = ixp4xx_timer_freq;
+
gpio_request(GPIO_SCL, "SCL/clock");
gpio_request(GPIO_SDA, "SDA/data");
gpio_request(GPIO_STR, "strobe");
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 342acbe20f7c..04ef8025accc 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -104,15 +104,6 @@ struct eth_plat_info {
u8 hwaddr[6];
};
-/* Information about built-in HSS (synchronous serial) interfaces */
-struct hss_plat_info {
- int (*set_clock)(int port, unsigned int clock_type);
- int (*open)(int port, void *pdev,
- void (*set_carrier_cb)(void *pdev, int carrier));
- void (*close)(int port, void *pdev);
- u8 txreadyq;
-};
-
/*
* Frequency of clock used for primary clocksource
*/
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dd1a147f2971..4530840e15ef 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -315,7 +315,8 @@ config DSCC4_PCI_RST
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
- depends on HDLC && ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
+ depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
+ depends on ARCH_IXP4XX
help
Say Y here if you want to use built-in HSS ports
on IXP4xx processor.
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index e7619cec978a..7c5cf77e9ef1 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/wan_ixp4xx_hss.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/soc/ixp4xx/npe.h>
@@ -1182,14 +1183,14 @@ static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
}
}
-static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
+static u32 check_clock(u32 timer_freq, u32 rate, u32 a, u32 b, u32 c,
u32 *best, u32 *best_diff, u32 *reg)
{
/* a is 10-bit, b is 10-bit, c is 12-bit */
u64 new_rate;
u32 new_diff;
- new_rate = ixp4xx_timer_freq * (u64)(c + 1);
+ new_rate = timer_freq * (u64)(c + 1);
do_div(new_rate, a * (c + 1) + b + 1);
new_diff = abs((u32)new_rate - rate);
@@ -1201,40 +1202,43 @@ static u32 check_clock(u32 rate, u32 a, u32 b, u32 c,
return new_diff;
}
-static void find_best_clock(u32 rate, u32 *best, u32 *reg)
+static void find_best_clock(u32 timer_freq, u32 rate, u32 *best, u32 *reg)
{
u32 a, b, diff = 0xFFFFFFFF;
- a = ixp4xx_timer_freq / rate;
+ a = timer_freq / rate;
if (a > 0x3FF) { /* 10-bit value - we can go as slow as ca. 65 kb/s */
- check_clock(rate, 0x3FF, 1, 1, best, &diff, reg);
+ check_clock(timer_freq, rate, 0x3FF, 1, 1, best, &diff, reg);
return;
}
if (a == 0) { /* > 66.666 MHz */
a = 1; /* minimum divider is 1 (a = 0, b = 1, c = 1) */
- rate = ixp4xx_timer_freq;
+ rate = timer_freq;
}
- if (rate * a == ixp4xx_timer_freq) { /* don't divide by 0 later */
- check_clock(rate, a - 1, 1, 1, best, &diff, reg);
+ if (rate * a == timer_freq) { /* don't divide by 0 later */
+ check_clock(timer_freq, rate, a - 1, 1, 1, best, &diff, reg);
return;
}
for (b = 0; b < 0x400; b++) {
u64 c = (b + 1) * (u64)rate;
- do_div(c, ixp4xx_timer_freq - rate * a);
+ do_div(c, timer_freq - rate * a);
c--;
if (c >= 0xFFF) { /* 12-bit - no need to check more 'b's */
if (b == 0 && /* also try a bit higher rate */
- !check_clock(rate, a - 1, 1, 1, best, &diff, reg))
+ !check_clock(timer_freq, rate, a - 1, 1, 1, best,
+ &diff, reg))
return;
- check_clock(rate, a, b, 0xFFF, best, &diff, reg);
+ check_clock(timer_freq, rate, a, b, 0xFFF, best,
+ &diff, reg);
return;
}
- if (!check_clock(rate, a, b, c, best, &diff, reg))
+ if (!check_clock(timer_freq, rate, a, b, c, best, &diff, reg))
return;
- if (!check_clock(rate, a, b, c + 1, best, &diff, reg))
+ if (!check_clock(timer_freq, rate, a, b, c + 1, best, &diff,
+ reg))
return;
}
}
@@ -1285,8 +1289,9 @@ static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
port->clock_type = clk; /* Update settings */
if (clk == CLOCK_INT)
- find_best_clock(new_line.clock_rate, &port->clock_rate,
- &port->clock_reg);
+ find_best_clock(port->plat->timer_freq,
+ new_line.clock_rate,
+ &port->clock_rate, &port->clock_reg);
else {
port->clock_rate = 0;
port->clock_reg = CLK42X_SPEED_2048KHZ;
diff --git a/include/linux/platform_data/wan_ixp4xx_hss.h b/include/linux/platform_data/wan_ixp4xx_hss.h
new file mode 100644
index 000000000000..d525a0feb9e1
--- /dev/null
+++ b/include/linux/platform_data/wan_ixp4xx_hss.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_WAN_IXP4XX_HSS_H
+#define __PLATFORM_DATA_WAN_IXP4XX_HSS_H
+
+#include <linux/types.h>
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+ int (*set_clock)(int port, unsigned int clock_type);
+ int (*open)(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier));
+ void (*close)(int port, void *pdev);
+ u8 txreadyq;
+ u32 timer_freq;
+};
+
+#endif
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 3/9 v5] ptp: ixp46x: move adjacent to ethernet driver
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 1/9 v5] wan: ixp4xx_hss: fix compile-testing on 64-bit Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 2/9 v5] wan: ixp4xx_hss: prepare compile testing Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 4/9 v5] ixp4xx_eth: move platform_data definition Linus Walleij
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
From: Arnd Bergmann <arnd@arndb.de>
The ixp46x ptp driver has a somewhat unusual setup, where the ptp
driver and the ethernet driver are in different directories but
access the same registers that are defined a platform specific
header file.
Moving everything into drivers/net/ makes it look more like most
other ptp drivers and allows compile-testing this driver on
other targets.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Rename patch as "move ADJACENT" which makes more sense
---
drivers/net/ethernet/xscale/Kconfig | 14 ++++++++++++++
drivers/net/ethernet/xscale/Makefile | 3 ++-
drivers/net/ethernet/xscale/ixp4xx_eth.c | 3 ++-
drivers/{ptp => net/ethernet/xscale}/ptp_ixp46x.c | 3 ++-
.../net/ethernet/xscale/ptp_ixp46x.h | 0
drivers/ptp/Kconfig | 14 --------------
drivers/ptp/Makefile | 3 +--
7 files changed, 21 insertions(+), 19 deletions(-)
rename drivers/{ptp => net/ethernet/xscale}/ptp_ixp46x.c (99%)
rename arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h => drivers/net/ethernet/xscale/ptp_ixp46x.h (100%)
diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig
index cd0a8f46e7c6..98aa7b8ddb06 100644
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
@@ -27,4 +27,18 @@ config IXP4XX_ETH
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
+config PTP_1588_CLOCK_IXP46X
+ tristate "Intel IXP46x as PTP clock"
+ depends on IXP4XX_ETH
+ depends on PTP_1588_CLOCK
+ default y
+ help
+ This driver adds support for using the IXP46X as a PTP
+ clock. This clock is only useful if your PTP programs are
+ getting hardware time stamps on the PTP Ethernet packets
+ using the SO_TIMESTAMPING API.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ptp_ixp46x.
+
endif # NET_VENDOR_XSCALE
diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile
index 794a519d07b3..607f91b1e878 100644
--- a/drivers/net/ethernet/xscale/Makefile
+++ b/drivers/net/ethernet/xscale/Makefile
@@ -3,4 +3,5 @@
# Makefile for the Intel XScale IXP device drivers.
#
-obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
+obj-$(CONFIG_PTP_1588_CLOCK_IXP46X) += ptp_ixp46x.o
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 6fc04ffb22c2..0075ecdb21f4 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -33,10 +33,11 @@
#include <linux/ptp_classify.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <mach/ixp46x_ts.h>
#include <linux/soc/ixp4xx/npe.h>
#include <linux/soc/ixp4xx/qmgr.h>
+#include "ixp46x_ts.h"
+
#define DEBUG_DESC 0
#define DEBUG_RX 0
#define DEBUG_TX 0
diff --git a/drivers/ptp/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
similarity index 99%
rename from drivers/ptp/ptp_ixp46x.c
rename to drivers/net/ethernet/xscale/ptp_ixp46x.c
index 67028484e9a0..9ecc395239e9 100644
--- a/drivers/ptp/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -15,7 +15,8 @@
#include <linux/module.h>
#include <linux/ptp_clock_kernel.h>
-#include <mach/ixp46x_ts.h>
+
+#include "ixp46x_ts.h"
#define DRIVER "ptp_ixp46x"
#define N_EXT_TS 2
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/drivers/net/ethernet/xscale/ptp_ixp46x.h
similarity index 100%
rename from arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h
rename to drivers/net/ethernet/xscale/ptp_ixp46x.h
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index c382158f587d..475c60dccaa4 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -56,20 +56,6 @@ config PTP_1588_CLOCK_QORIQ
To compile this driver as a module, choose M here: the module
will be called ptp-qoriq.
-config PTP_1588_CLOCK_IXP46X
- tristate "Intel IXP46x as PTP clock"
- depends on IXP4XX_ETH
- depends on PTP_1588_CLOCK
- default y
- help
- This driver adds support for using the IXP46X as a PTP
- clock. This clock is only useful if your PTP programs are
- getting hardware time stamps on the PTP Ethernet packets
- using the SO_TIMESTAMPING API.
-
- To compile this driver as a module, choose M here: the module
- will be called ptp_ixp46x.
-
comment "Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks."
depends on PHYLIB=n || NETWORK_PHY_TIMESTAMPING=n
diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile
index 3fb91bebbaf7..8c830336f178 100644
--- a/drivers/ptp/Makefile
+++ b/drivers/ptp/Makefile
@@ -7,10 +7,9 @@ ptp-y := ptp_clock.o ptp_chardev.o ptp_sysfs.o
obj-$(CONFIG_PTP_1588_CLOCK) += ptp.o
obj-$(CONFIG_PTP_1588_CLOCK_DTE) += ptp_dte.o
obj-$(CONFIG_PTP_1588_CLOCK_INES) += ptp_ines.o
-obj-$(CONFIG_PTP_1588_CLOCK_IXP46X) += ptp_ixp46x.o
obj-$(CONFIG_PTP_1588_CLOCK_PCH) += ptp_pch.o
obj-$(CONFIG_PTP_1588_CLOCK_KVM) += ptp_kvm.o
obj-$(CONFIG_PTP_1588_CLOCK_QORIQ) += ptp-qoriq.o
ptp-qoriq-y += ptp_qoriq.o
ptp-qoriq-$(CONFIG_DEBUG_FS) += ptp_qoriq_debugfs.o
-obj-$(CONFIG_PTP_1588_CLOCK_IDTCM) += ptp_clockmatrix.o
\ No newline at end of file
+obj-$(CONFIG_PTP_1588_CLOCK_IDTCM) += ptp_clockmatrix.o
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 4/9 v5] ixp4xx_eth: move platform_data definition
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
` (2 preceding siblings ...)
2020-01-12 12:04 ` [PATCH net-next 3/9 v5] ptp: ixp46x: move adjacent to ethernet driver Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 5/9 v5] net: ethernet: ixp4xx: Standard module init Linus Walleij
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
From: Arnd Bergmann <arnd@arndb.de>
The platform data is needed to compile the driver as standalone,
so move it to a global location along with similar files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Rebased on the rest of the series.
---
arch/arm/mach-ixp4xx/include/mach/platform.h | 13 +------------
.../xscale/{ptp_ixp46x.h => ixp46x_ts.h} | 0
drivers/net/ethernet/xscale/ixp4xx_eth.c | 1 +
include/linux/platform_data/eth_ixp4xx.h | 19 +++++++++++++++++++
4 files changed, 21 insertions(+), 12 deletions(-)
rename drivers/net/ethernet/xscale/{ptp_ixp46x.h => ixp46x_ts.h} (100%)
create mode 100644 include/linux/platform_data/eth_ixp4xx.h
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 04ef8025accc..6d403fe0bf52 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -15,6 +15,7 @@
#ifndef __ASSEMBLY__
#include <linux/reboot.h>
+#include <linux/platform_data/eth_ixp4xx.h>
#include <asm/types.h>
@@ -92,18 +93,6 @@ struct ixp4xx_pata_data {
void __iomem *cs1;
};
-#define IXP4XX_ETH_NPEA 0x00
-#define IXP4XX_ETH_NPEB 0x10
-#define IXP4XX_ETH_NPEC 0x20
-
-/* Information about built-in Ethernet MAC interfaces */
-struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-};
-
/*
* Frequency of clock used for primary clocksource
*/
diff --git a/drivers/net/ethernet/xscale/ptp_ixp46x.h b/drivers/net/ethernet/xscale/ixp46x_ts.h
similarity index 100%
rename from drivers/net/ethernet/xscale/ptp_ixp46x.h
rename to drivers/net/ethernet/xscale/ixp46x_ts.h
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 0075ecdb21f4..e811bf0d23cb 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -29,6 +29,7 @@
#include <linux/net_tstamp.h>
#include <linux/of.h>
#include <linux/phy.h>
+#include <linux/platform_data/eth_ixp4xx.h>
#include <linux/platform_device.h>
#include <linux/ptp_classify.h>
#include <linux/slab.h>
diff --git a/include/linux/platform_data/eth_ixp4xx.h b/include/linux/platform_data/eth_ixp4xx.h
new file mode 100644
index 000000000000..6f652ea0c6ae
--- /dev/null
+++ b/include/linux/platform_data/eth_ixp4xx.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_ETH_IXP4XX
+#define __PLATFORM_DATA_ETH_IXP4XX
+
+#include <linux/types.h>
+
+#define IXP4XX_ETH_NPEA 0x00
+#define IXP4XX_ETH_NPEB 0x10
+#define IXP4XX_ETH_NPEC 0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+ u8 phy; /* MII PHY ID, 0 - 31 */
+ u8 rxq; /* configurable, currently 0 - 31 only */
+ u8 txreadyq;
+ u8 hwaddr[6];
+};
+
+#endif
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 5/9 v5] net: ethernet: ixp4xx: Standard module init
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
` (3 preceding siblings ...)
2020-01-12 12:04 ` [PATCH net-next 4/9 v5] ixp4xx_eth: move platform_data definition Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 6/9 v5] net: ethernet: ixp4xx: Use distinct local variable Linus Walleij
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
The IXP4xx driver was initializing the MDIO bus before even
probing, in the callbacks supposed to be used for setting up
the module itself, and with the side effect of trying to
register the MDIO bus as soon as this module was loaded or
compiled into the kernel whether the device was discovered
or not.
This does not work with multiplatform environments.
To get rid of this: set up the MDIO bus from the probe()
callback and remove it in the remove() callback. Rename
the probe() and remove() calls to reflect the most common
conventions.
Since there is a bit of checking for the ethernet feature
to be present in the MDIO registering function, making the
whole module not even be registered if we can't find an
MDIO bus, we need something similar: register the MDIO
bus when the corresponding ethernet is probed, and
return -EPROBE_DEFER on the other interfaces until this
happens. If no MDIO bus is present on any of the
registered interfaces we will eventually bail out.
None of the platforms I've seen has e.g. MDIO on EthB
and only uses EthC, there is always a Ethernet hardware
on the NPE (B, C) that has the MDIO bus, we just might
have to wait for it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Change the first alloc_etherdev() to devm_alloc_etherdev()
and drop one leg of the errorpath so we can just return
with error code in the first part of the code.
---
drivers/net/ethernet/xscale/ixp4xx_eth.c | 96 +++++++++++-------------
1 file changed, 44 insertions(+), 52 deletions(-)
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index e811bf0d23cb..799ffebba491 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -519,25 +519,14 @@ static int ixp4xx_mdio_write(struct mii_bus *bus, int phy_id, int location,
return ret;
}
-static int ixp4xx_mdio_register(void)
+static int ixp4xx_mdio_register(struct eth_regs __iomem *regs)
{
int err;
if (!(mdio_bus = mdiobus_alloc()))
return -ENOMEM;
- if (cpu_is_ixp43x()) {
- /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
- if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
- return -ENODEV;
- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
- } else {
- /* All MII PHY accesses use NPE-B Ethernet registers */
- if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
- return -ENODEV;
- mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
- }
-
+ mdio_regs = regs;
__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
spin_lock_init(&mdio_lock);
mdio_bus->name = "IXP4xx MII Bus";
@@ -1376,7 +1365,7 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-static int eth_init_one(struct platform_device *pdev)
+static int ixp4xx_eth_probe(struct platform_device *pdev)
{
struct port *port;
struct net_device *dev;
@@ -1386,7 +1375,7 @@ static int eth_init_one(struct platform_device *pdev)
char phy_id[MII_BUS_ID_SIZE + 3];
int err;
- if (!(dev = alloc_etherdev(sizeof(struct port))))
+ if (!(dev = devm_alloc_etherdev(&pdev->dev, sizeof(struct port))))
return -ENOMEM;
SET_NETDEV_DEV(dev, &pdev->dev);
@@ -1396,20 +1385,51 @@ static int eth_init_one(struct platform_device *pdev)
switch (port->id) {
case IXP4XX_ETH_NPEA:
+ /* If the MDIO bus is not up yet, defer probe */
+ if (!mdio_bus)
+ return -EPROBE_DEFER;
port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
regs_phys = IXP4XX_EthA_BASE_PHYS;
break;
case IXP4XX_ETH_NPEB:
+ /*
+ * On all except IXP43x, NPE-B is used for the MDIO bus.
+ * If there is no NPE-B in the feature set, bail out, else
+ * register the MDIO bus.
+ */
+ if (!cpu_is_ixp43x()) {
+ if (!(ixp4xx_read_feature_bits() &
+ IXP4XX_FEATURE_NPEB_ETH0))
+ return -ENODEV;
+ /* Else register the MDIO bus on NPE-B */
+ if ((err = ixp4xx_mdio_register(IXP4XX_EthC_BASE_VIRT)))
+ return err;
+ }
+ if (!mdio_bus)
+ return -EPROBE_DEFER;
port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
regs_phys = IXP4XX_EthB_BASE_PHYS;
break;
case IXP4XX_ETH_NPEC:
+ /*
+ * IXP43x lacks NPE-B and uses NPE-C for the MDIO bus access,
+ * of there is no NPE-C, no bus, nothing works, so bail out.
+ */
+ if (cpu_is_ixp43x()) {
+ if (!(ixp4xx_read_feature_bits() &
+ IXP4XX_FEATURE_NPEC_ETH))
+ return -ENODEV;
+ /* Else register the MDIO bus on NPE-C */
+ if ((err = ixp4xx_mdio_register(IXP4XX_EthC_BASE_VIRT)))
+ return err;
+ }
+ if (!mdio_bus)
+ return -EPROBE_DEFER;
port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
regs_phys = IXP4XX_EthC_BASE_PHYS;
break;
default:
- err = -ENODEV;
- goto err_free;
+ return -ENODEV;
}
dev->netdev_ops = &ixp4xx_netdev_ops;
@@ -1418,10 +1438,8 @@ static int eth_init_one(struct platform_device *pdev)
netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT);
- if (!(port->npe = npe_request(NPE_ID(port->id)))) {
- err = -EIO;
- goto err_free;
- }
+ if (!(port->npe = npe_request(NPE_ID(port->id))))
+ return -EIO;
port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
if (!port->mem_res) {
@@ -1467,12 +1485,10 @@ static int eth_init_one(struct platform_device *pdev)
release_resource(port->mem_res);
err_npe_rel:
npe_release(port->npe);
-err_free:
- free_netdev(dev);
return err;
}
-static int eth_remove_one(struct platform_device *pdev)
+static int ixp4xx_eth_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct phy_device *phydev = dev->phydev;
@@ -1480,45 +1496,21 @@ static int eth_remove_one(struct platform_device *pdev)
unregister_netdev(dev);
phy_disconnect(phydev);
+ ixp4xx_mdio_remove();
npe_port_tab[NPE_ID(port->id)] = NULL;
npe_release(port->npe);
release_resource(port->mem_res);
- free_netdev(dev);
return 0;
}
static struct platform_driver ixp4xx_eth_driver = {
.driver.name = DRV_NAME,
- .probe = eth_init_one,
- .remove = eth_remove_one,
+ .probe = ixp4xx_eth_probe,
+ .remove = ixp4xx_eth_remove,
};
-
-static int __init eth_init_module(void)
-{
- int err;
-
- /*
- * FIXME: we bail out on device tree boot but this really needs
- * to be fixed in a nicer way: this registers the MDIO bus before
- * even matching the driver infrastructure, we should only probe
- * detected hardware.
- */
- if (of_have_populated_dt())
- return -ENODEV;
- if ((err = ixp4xx_mdio_register()))
- return err;
- return platform_driver_register(&ixp4xx_eth_driver);
-}
-
-static void __exit eth_cleanup_module(void)
-{
- platform_driver_unregister(&ixp4xx_eth_driver);
- ixp4xx_mdio_remove();
-}
+module_platform_driver(ixp4xx_eth_driver);
MODULE_AUTHOR("Krzysztof Halasa");
MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ixp4xx_eth");
-module_init(eth_init_module);
-module_exit(eth_cleanup_module);
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 6/9 v5] net: ethernet: ixp4xx: Use distinct local variable
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
` (4 preceding siblings ...)
2020-01-12 12:04 ` [PATCH net-next 5/9 v5] net: ethernet: ixp4xx: Standard module init Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 7/9 v5] net: ehernet: ixp4xx: Use netdev_* messages Linus Walleij
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
Use "ndev" for the struct net_device and "dev" for the
struct device in probe() and remove(). Add the local
"dev" pointer for later use in refactoring.
Take this opportunity to fix inverse christmas tree
coding style.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Rebase on the other changes.
---
drivers/net/ethernet/xscale/ixp4xx_eth.c | 47 +++++++++++++-----------
1 file changed, 25 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 799ffebba491..05ab8426bb8d 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1367,20 +1367,23 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
static int ixp4xx_eth_probe(struct platform_device *pdev)
{
- struct port *port;
- struct net_device *dev;
- struct eth_plat_info *plat = dev_get_platdata(&pdev->dev);
+ char phy_id[MII_BUS_ID_SIZE + 3];
struct phy_device *phydev = NULL;
+ struct device *dev = &pdev->dev;
+ struct eth_plat_info *plat;
+ struct net_device *ndev;
+ struct port *port;
u32 regs_phys;
- char phy_id[MII_BUS_ID_SIZE + 3];
int err;
- if (!(dev = devm_alloc_etherdev(&pdev->dev, sizeof(struct port))))
+ plat = dev_get_platdata(dev);
+
+ if (!(ndev = devm_alloc_etherdev(dev, sizeof(struct port))))
return -ENOMEM;
- SET_NETDEV_DEV(dev, &pdev->dev);
- port = netdev_priv(dev);
- port->netdev = dev;
+ SET_NETDEV_DEV(ndev, dev);
+ port = netdev_priv(ndev);
+ port->netdev = ndev;
port->id = pdev->id;
switch (port->id) {
@@ -1432,16 +1435,16 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
return -ENODEV;
}
- dev->netdev_ops = &ixp4xx_netdev_ops;
- dev->ethtool_ops = &ixp4xx_ethtool_ops;
- dev->tx_queue_len = 100;
+ ndev->netdev_ops = &ixp4xx_netdev_ops;
+ ndev->ethtool_ops = &ixp4xx_ethtool_ops;
+ ndev->tx_queue_len = 100;
- netif_napi_add(dev, &port->napi, eth_poll, NAPI_WEIGHT);
+ netif_napi_add(ndev, &port->napi, eth_poll, NAPI_WEIGHT);
if (!(port->npe = npe_request(NPE_ID(port->id))))
return -EIO;
- port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
+ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, ndev->name);
if (!port->mem_res) {
err = -EBUSY;
goto err_npe_rel;
@@ -1449,9 +1452,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
port->plat = plat;
npe_port_tab[NPE_ID(port->id)] = port;
- memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
+ memcpy(ndev->dev_addr, plat->hwaddr, ETH_ALEN);
- platform_set_drvdata(pdev, dev);
+ platform_set_drvdata(pdev, ndev);
__raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
&port->regs->core_control);
@@ -1461,7 +1464,7 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
mdio_bus->id, plat->phy);
- phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
+ phydev = phy_connect(ndev, phy_id, &ixp4xx_adjust_link,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(phydev)) {
err = PTR_ERR(phydev);
@@ -1470,10 +1473,10 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
phydev->irq = PHY_POLL;
- if ((err = register_netdev(dev)))
+ if ((err = register_netdev(ndev)))
goto err_phy_dis;
- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
+ printk(KERN_INFO "%s: MII PHY %i on %s\n", ndev->name, plat->phy,
npe_name(port->npe));
return 0;
@@ -1490,11 +1493,11 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
static int ixp4xx_eth_remove(struct platform_device *pdev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct phy_device *phydev = dev->phydev;
- struct port *port = netdev_priv(dev);
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct phy_device *phydev = ndev->phydev;
+ struct port *port = netdev_priv(ndev);
- unregister_netdev(dev);
+ unregister_netdev(ndev);
phy_disconnect(phydev);
ixp4xx_mdio_remove();
npe_port_tab[NPE_ID(port->id)] = NULL;
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 7/9 v5] net: ehernet: ixp4xx: Use netdev_* messages
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
` (5 preceding siblings ...)
2020-01-12 12:04 ` [PATCH net-next 6/9 v5] net: ethernet: ixp4xx: Use distinct local variable Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 8/9 v5] ARM/net: ixp4xx: Pass ethernet physical base as resource Linus Walleij
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
Simplify and correct a bunch of messages using printk
directly to use the netdev_* macros. I have not changed
all of them, just the low-hanging fruit.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Squashed the previous devm_* changes into the patch
where the simplified errorpath is needed and renamed
this patch to just be about the message.
- Fixed a bunch more prints.
---
drivers/net/ethernet/xscale/ixp4xx_eth.c | 52 +++++++++++-------------
1 file changed, 23 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 05ab8426bb8d..f7edf8b38dea 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -572,8 +572,8 @@ static void ixp4xx_adjust_link(struct net_device *dev)
__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
&port->regs->tx_control[0]);
- printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
- dev->name, port->speed, port->duplex ? "full" : "half");
+ netdev_info(dev, "%s: link up, speed %u Mb/s, %s duplex\n",
+ dev->name, port->speed, port->duplex ? "full" : "half");
}
@@ -583,7 +583,7 @@ static inline void debug_pkt(struct net_device *dev, const char *func,
#if DEBUG_PKT_BYTES
int i;
- printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
+ netdev_debug(dev, "%s(%i) ", func, len);
for (i = 0; i < len; i++) {
if (i >= DEBUG_PKT_BYTES)
break;
@@ -674,7 +674,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
int received = 0;
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
+ netdev_debug(dev, "eth_poll\n");
#endif
while (received < budget) {
@@ -688,23 +688,20 @@ static int eth_poll(struct napi_struct *napi, int budget)
if ((n = queue_get_desc(rxq, port, 0)) < 0) {
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll napi_complete\n",
- dev->name);
+ netdev_debug(dev, "eth_poll napi_complete\n");
#endif
napi_complete(napi);
qmgr_enable_irq(rxq);
if (!qmgr_stat_below_low_watermark(rxq) &&
napi_reschedule(napi)) { /* not empty again */
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll napi_reschedule succeeded\n",
- dev->name);
+ netdev_debug(dev, "eth_poll napi_reschedule succeeded\n");
#endif
qmgr_disable_irq(rxq);
continue;
}
#if DEBUG_RX
- printk(KERN_DEBUG "%s: eth_poll all done\n",
- dev->name);
+ netdev_debug(dev, "eth_poll all done\n");
#endif
return received; /* all work done */
}
@@ -769,7 +766,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
}
#if DEBUG_RX
- printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
+ netdev_debug(dev, "eth_poll(): end, not all work done\n");
#endif
return received; /* not all work done */
}
@@ -833,7 +830,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
struct desc *desc;
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
+ netdev_debug(dev, "eth_xmit\n");
#endif
if (unlikely(skb->len > MAX_MRU)) {
@@ -888,22 +885,21 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
+ netdev_debug(dev, "eth_xmit queue full\n");
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
/* really empty in fact */
if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit ready again\n",
- dev->name);
+ netdev_debug(dev, "eth_xmit ready again\n");
#endif
netif_wake_queue(dev);
}
}
#if DEBUG_TX
- printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
+ netdev_debug(dev, "eth_xmit end\n");
#endif
ixp_tx_timestamp(port, skb);
@@ -1177,8 +1173,7 @@ static int eth_open(struct net_device *dev)
return err;
if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
- printk(KERN_ERR "%s: %s not responding\n", dev->name,
- npe_name(npe));
+ netdev_err(dev, "%s not responding\n", npe_name(npe));
return -EIO;
}
port->firmware[0] = msg.byte4;
@@ -1290,7 +1285,7 @@ static int eth_close(struct net_device *dev)
msg.eth_id = port->id;
msg.byte3 = 1;
if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
- printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
+ netdev_crit(dev, "unable to enable loopback\n");
i = 0;
do { /* drain RX buffers */
@@ -1314,11 +1309,11 @@ static int eth_close(struct net_device *dev)
} while (++i < MAX_CLOSE_WAIT);
if (buffs)
- printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
- " left in NPE\n", dev->name, buffs);
+ netdev_crit(dev, "unable to drain RX queue, %i buffer(s)"
+ " left in NPE\n", buffs);
#if DEBUG_CLOSE
if (!buffs)
- printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
+ netdev_debug(dev, "draining RX queue took %i cycles\n", i);
#endif
buffs = TX_DESCS;
@@ -1334,17 +1329,16 @@ static int eth_close(struct net_device *dev)
} while (++i < MAX_CLOSE_WAIT);
if (buffs)
- printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
- "left in NPE\n", dev->name, buffs);
+ netdev_crit(dev, "unable to drain TX queue, %i buffer(s) "
+ "left in NPE\n", buffs);
#if DEBUG_CLOSE
if (!buffs)
- printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
+ netdev_debug(dev, "draining TX queues took %i cycles\n", i);
#endif
msg.byte3 = 0;
if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
- printk(KERN_CRIT "%s: unable to disable loopback\n",
- dev->name);
+ netdev_crit(dev, "unable to disable loopback\n");
phy_stop(dev->phydev);
@@ -1476,8 +1470,8 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
if ((err = register_netdev(ndev)))
goto err_phy_dis;
- printk(KERN_INFO "%s: MII PHY %i on %s\n", ndev->name, plat->phy,
- npe_name(port->npe));
+ netdev_info(ndev, "%s: MII PHY %i on %s\n", ndev->name, plat->phy,
+ npe_name(port->npe));
return 0;
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 8/9 v5] ARM/net: ixp4xx: Pass ethernet physical base as resource
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
` (6 preceding siblings ...)
2020-01-12 12:04 ` [PATCH net-next 7/9 v5] net: ehernet: ixp4xx: Use netdev_* messages Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 12:04 ` [PATCH net-next 9/9 v5] net: ethernet: ixp4xx: Use parent dev for DMA pool Linus Walleij
2020-01-12 23:44 ` [PATCH net-next 0/9 v5] IXP4xx networking cleanups Jakub Kicinski
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
In order to probe this ethernet interface from the device tree
all physical MMIO regions must be passed as resources. Begin
this rewrite by first passing the port base address as a
resource for all platforms using this driver, remap it in
the driver and avoid using any reference of the statically
mapped virtual address in the driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Rebased on the rest of the series.
---
arch/arm/mach-ixp4xx/fsg-setup.c | 20 ++++++++++++++++++++
arch/arm/mach-ixp4xx/goramo_mlr.c | 20 ++++++++++++++++++++
arch/arm/mach-ixp4xx/ixdp425-setup.c | 20 ++++++++++++++++++++
arch/arm/mach-ixp4xx/nas100d-setup.c | 10 ++++++++++
arch/arm/mach-ixp4xx/nslu2-setup.c | 10 ++++++++++
arch/arm/mach-ixp4xx/omixp-setup.c | 20 ++++++++++++++++++++
arch/arm/mach-ixp4xx/vulcan-setup.c | 20 ++++++++++++++++++++
drivers/net/ethernet/xscale/ixp4xx_eth.c | 20 +++++++++++---------
8 files changed, 131 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 648932d8d7a8..507ee3878769 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -132,6 +132,22 @@ static struct platform_device fsg_leds = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource fsg_eth_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource fsg_eth_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info fsg_plat_eth[] = {
{
.phy = 5,
@@ -151,12 +167,16 @@ static struct platform_device fsg_eth[] = {
.dev = {
.platform_data = fsg_plat_eth,
},
+ .num_resources = ARRAY_SIZE(fsg_eth_npeb_resources),
+ .resource = fsg_eth_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev = {
.platform_data = fsg_plat_eth + 1,
},
+ .num_resources = ARRAY_SIZE(fsg_eth_npec_resources),
+ .resource = fsg_eth_npec_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 93b7afeee142..07b50dfcc489 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -273,6 +273,22 @@ static struct platform_device device_uarts = {
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource eth_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource eth_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info eth_plat[] = {
{
.phy = 0,
@@ -290,10 +306,14 @@ static struct platform_device device_eth_tab[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = eth_plat,
+ .num_resources = ARRAY_SIZE(eth_npeb_resources),
+ .resource = eth_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev.platform_data = eth_plat + 1,
+ .num_resources = ARRAY_SIZE(eth_npec_resources),
+ .resource = eth_npec_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6f0f7ed18ea8..45d5b720ded6 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -187,6 +187,22 @@ static struct platform_device ixdp425_uart = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource ixp425_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource ixp425_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info ixdp425_plat_eth[] = {
{
.phy = 0,
@@ -204,10 +220,14 @@ static struct platform_device ixdp425_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = ixdp425_plat_eth,
+ .num_resources = ARRAY_SIZE(ixp425_npeb_resources),
+ .resource = ixp425_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev.platform_data = ixdp425_plat_eth + 1,
+ .num_resources = ARRAY_SIZE(ixp425_npec_resources),
+ .resource = ixp425_npec_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index c142cfa8c5d6..6959ad2e3aec 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -165,6 +165,14 @@ static struct platform_device nas100d_uart = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource nas100d_eth_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info nas100d_plat_eth[] = {
{
.phy = 0,
@@ -178,6 +186,8 @@ static struct platform_device nas100d_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = nas100d_plat_eth,
+ .num_resources = ARRAY_SIZE(nas100d_eth_resources),
+ .resource = nas100d_eth_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ee1877fcfafe..a428bb918703 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -185,6 +185,14 @@ static struct platform_device nslu2_uart = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource nslu2_eth_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info nslu2_plat_eth[] = {
{
.phy = 1,
@@ -198,6 +206,8 @@ static struct platform_device nslu2_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = nslu2_plat_eth,
+ .num_resources = ARRAY_SIZE(nslu2_eth_resources),
+ .resource = nslu2_eth_resources,
}
};
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 6ed5a9aed600..8f2b8c473d7a 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -170,6 +170,22 @@ static struct platform_device mic256_leds = {
};
/* Built-in 10/100 Ethernet MAC interfaces */
+static struct resource ixp425_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource ixp425_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info ixdp425_plat_eth[] = {
{
.phy = 0,
@@ -187,10 +203,14 @@ static struct platform_device ixdp425_eth[] = {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEB,
.dev.platform_data = ixdp425_plat_eth,
+ .num_resources = ARRAY_SIZE(ixp425_npeb_resources),
+ .resource = ixp425_npeb_resources,
}, {
.name = "ixp4xx_eth",
.id = IXP4XX_ETH_NPEC,
.dev.platform_data = ixdp425_plat_eth + 1,
+ .num_resources = ARRAY_SIZE(ixp425_npec_resources),
+ .resource = ixp425_npec_resources,
},
};
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index d2ebb7c675a8..e506d2af98ad 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -124,6 +124,22 @@ static struct platform_device vulcan_uart = {
.num_resources = ARRAY_SIZE(vulcan_uart_resources),
};
+static struct resource vulcan_npeb_resources[] = {
+ {
+ .start = IXP4XX_EthB_BASE_PHYS,
+ .end = IXP4XX_EthB_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource vulcan_npec_resources[] = {
+ {
+ .start = IXP4XX_EthC_BASE_PHYS,
+ .end = IXP4XX_EthC_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct eth_plat_info vulcan_plat_eth[] = {
[0] = {
.phy = 0,
@@ -144,6 +160,8 @@ static struct platform_device vulcan_eth[] = {
.dev = {
.platform_data = &vulcan_plat_eth[0],
},
+ .num_resources = ARRAY_SIZE(vulcan_npeb_resources),
+ .resource = vulcan_npeb_resources,
},
[1] = {
.name = "ixp4xx_eth",
@@ -151,6 +169,8 @@ static struct platform_device vulcan_eth[] = {
.dev = {
.platform_data = &vulcan_plat_eth[1],
},
+ .num_resources = ARRAY_SIZE(vulcan_npec_resources),
+ .resource = vulcan_npec_resources,
},
};
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index f7edf8b38dea..ee45215c4ba4 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1365,9 +1365,10 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
struct phy_device *phydev = NULL;
struct device *dev = &pdev->dev;
struct eth_plat_info *plat;
+ resource_size_t regs_phys;
struct net_device *ndev;
+ struct resource *res;
struct port *port;
- u32 regs_phys;
int err;
plat = dev_get_platdata(dev);
@@ -1380,13 +1381,18 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
port->netdev = ndev;
port->id = pdev->id;
+ /* Get the port resource and remap */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+ regs_phys = res->start;
+ port->regs = devm_ioremap_resource(dev, res);
+
switch (port->id) {
case IXP4XX_ETH_NPEA:
/* If the MDIO bus is not up yet, defer probe */
if (!mdio_bus)
return -EPROBE_DEFER;
- port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
- regs_phys = IXP4XX_EthA_BASE_PHYS;
break;
case IXP4XX_ETH_NPEB:
/*
@@ -1399,13 +1405,11 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
IXP4XX_FEATURE_NPEB_ETH0))
return -ENODEV;
/* Else register the MDIO bus on NPE-B */
- if ((err = ixp4xx_mdio_register(IXP4XX_EthC_BASE_VIRT)))
+ if ((err = ixp4xx_mdio_register(port->regs)))
return err;
}
if (!mdio_bus)
return -EPROBE_DEFER;
- port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
- regs_phys = IXP4XX_EthB_BASE_PHYS;
break;
case IXP4XX_ETH_NPEC:
/*
@@ -1417,13 +1421,11 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
IXP4XX_FEATURE_NPEC_ETH))
return -ENODEV;
/* Else register the MDIO bus on NPE-C */
- if ((err = ixp4xx_mdio_register(IXP4XX_EthC_BASE_VIRT)))
+ if ((err = ixp4xx_mdio_register(port->regs)))
return err;
}
if (!mdio_bus)
return -EPROBE_DEFER;
- port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
- regs_phys = IXP4XX_EthC_BASE_PHYS;
break;
default:
return -ENODEV;
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH net-next 9/9 v5] net: ethernet: ixp4xx: Use parent dev for DMA pool
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
` (7 preceding siblings ...)
2020-01-12 12:04 ` [PATCH net-next 8/9 v5] ARM/net: ixp4xx: Pass ethernet physical base as resource Linus Walleij
@ 2020-01-12 12:04 ` Linus Walleij
2020-01-12 23:44 ` [PATCH net-next 0/9 v5] IXP4xx networking cleanups Jakub Kicinski
9 siblings, 0 replies; 11+ messages in thread
From: Linus Walleij @ 2020-01-12 12:04 UTC (permalink / raw)
To: netdev, David S . Miller; +Cc: Arnd Bergmann, Jakub Kicinski, Linus Walleij
Use the netdevice struct device .parent field when calling
dma_pool_create(): the .dma_coherent_mask and .dma_mask
pertains to the bus device on the hardware (platform)
bus in this case, not the struct device inside the network
device. This makes the pool allocation work.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v4->v5:
- Renase onto the net-next tree
ChangeLog v3->v4:
- Drop a stable tag and rebubmit.
ChangeLog v2->v3:
- Rebased on v5.5-rc1
ChangeLog v1->v2:
- Rebase with the rest of the series.
- Tag for stable, this is pretty serious.
- I have no real idea when this stopped working.
---
drivers/net/ethernet/xscale/ixp4xx_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index ee45215c4ba4..269596c15133 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1086,7 +1086,7 @@ static int init_queues(struct port *port)
int i;
if (!ports_open) {
- dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+ dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
POOL_ALLOC_SIZE, 32, 0);
if (!dma_pool)
return -ENOMEM;
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH net-next 0/9 v5] IXP4xx networking cleanups
2020-01-12 12:04 [PATCH net-next 0/9 v5] IXP4xx networking cleanups Linus Walleij
` (8 preceding siblings ...)
2020-01-12 12:04 ` [PATCH net-next 9/9 v5] net: ethernet: ixp4xx: Use parent dev for DMA pool Linus Walleij
@ 2020-01-12 23:44 ` Jakub Kicinski
9 siblings, 0 replies; 11+ messages in thread
From: Jakub Kicinski @ 2020-01-12 23:44 UTC (permalink / raw)
To: Linus Walleij; +Cc: netdev, David S . Miller, Arnd Bergmann
On Sun, 12 Jan 2020 13:04:41 +0100, Linus Walleij wrote:
> This v5 is a rebase of the v4 patch set on top of
> net-next.
Thanks for the respin, looks like Dave was happy with v4 already, so
applied to net-next.
Thank you!
^ permalink raw reply [flat|nested] 11+ messages in thread