[PATCH] net: stmmac: platform: use generic device api

[Ajay Gupta <ajaykuee@gmail.com>]

From: Ajay Gupta <ajayg@nvidia.com>

Use generic device api to allow reading more configuration
parameter from both DT or ACPI based devices.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
---
ACPI support related changes for dwc were reently queued [1]
This patch is required to read more configuration parameter
through ACPI table.

[1] https://marc.info/?l=linux-netdev&m=157661974305024&w=2

 .../ethernet/stmicro/stmmac/stmmac_platform.c | 49 +++++++++++--------
 1 file changed, 28 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 4775f49d7f3b..0532e7258064 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -398,6 +398,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	struct device_node *np = pdev->dev.of_node;
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_dma_cfg *dma_cfg;
+	struct device *dev = &pdev->dev;
 	int rc;
 
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
@@ -412,9 +413,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 		*mac = NULL;
 	}
 
-	rc = of_get_phy_mode(np, &plat->phy_interface);
-	if (rc)
-		return ERR_PTR(rc);
+	plat->phy_interface = device_get_phy_mode(dev);
+	if (plat->phy_interface < 0)
+		return ERR_PTR(plat->phy_interface);
 
 	plat->interface = stmmac_of_get_mac_mode(np);
 	if (plat->interface < 0)
@@ -428,7 +429,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	plat->phylink_node = np;
 
 	/* Get max speed of operation from device tree */
-	if (of_property_read_u32(np, "max-speed", &plat->max_speed))
+	if (device_property_read_u32(dev, "max-speed", &plat->max_speed))
 		plat->max_speed = -1;
 
 	plat->bus_id = of_alias_get_id(np, "ethernet");
@@ -442,12 +443,13 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	 * or get clk_csr from device tree.
 	 */
 	plat->clk_csr = -1;
-	of_property_read_u32(np, "clk_csr", &plat->clk_csr);
+	device_property_read_u32(dev, "clk_csr", &plat->clk_csr);
 
 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
 	 * and warn of its use. Remove this when phy node support is added.
 	 */
-	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
+	if (device_property_read_u32(dev, "snps,phy-addr", &plat->phy_addr)
+			== 0)
 		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 
 	/* To Configure PHY by using all device-tree supported properties */
@@ -455,15 +457,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	if (rc)
 		return ERR_PTR(rc);
 
-	of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
+	device_property_read_u32(dev, "tx-fifo-depth", &plat->tx_fifo_size);
 
-	of_property_read_u32(np, "rx-fifo-depth", &plat->rx_fifo_size);
+	device_property_read_u32(dev, "rx-fifo-depth", &plat->rx_fifo_size);
 
 	plat->force_sf_dma_mode =
-		of_property_read_bool(np, "snps,force_sf_dma_mode");
+		device_property_read_bool(dev, "snps,force_sf_dma_mode");
 
 	plat->en_tx_lpi_clockgating =
-		of_property_read_bool(np, "snps,en-tx-lpi-clockgating");
+		device_property_read_bool(dev, "snps,en-tx-lpi-clockgating");
 
 	/* Set the maxmtu to a default of JUMBO_LEN in case the
 	 * parameter is not present in the device tree.
@@ -535,25 +537,30 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	}
 	plat->dma_cfg = dma_cfg;
 
-	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
+	device_property_read_u32(dev, "snps,pbl", &dma_cfg->pbl);
 	if (!dma_cfg->pbl)
 		dma_cfg->pbl = DEFAULT_DMA_PBL;
-	of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl);
-	of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl);
-	dma_cfg->pblx8 = !of_property_read_bool(np, "snps,no-pbl-x8");
-
-	dma_cfg->aal = of_property_read_bool(np, "snps,aal");
-	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
-	dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
-
-	plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
+	device_property_read_u32(dev, "snps,txpbl", &dma_cfg->txpbl);
+	device_property_read_u32(dev, "snps,rxpbl", &dma_cfg->rxpbl);
+	dma_cfg->pblx8 = !device_property_read_bool(dev, "snps,no-pbl-x8");
+
+	dma_cfg->aal = device_property_read_bool(dev, "snps,aal");
+	dma_cfg->fixed_burst = device_property_read_bool(dev,
+							 "snps,fixed-burst");
+	dma_cfg->mixed_burst = device_property_read_bool(dev,
+							 "snps,mixed-burst");
+
+	plat->force_thresh_dma_mode =
+			device_property_read_bool(dev,
+						  "snps,force_thresh_dma_mode");
 	if (plat->force_thresh_dma_mode) {
 		plat->force_sf_dma_mode = 0;
 		dev_warn(&pdev->dev,
 			 "force_sf_dma_mode is ignored if force_thresh_dma_mode is set.\n");
 	}
 
-	of_property_read_u32(np, "snps,ps-speed", &plat->mac_port_sel_speed);
+	device_property_read_u32(dev, "snps,ps-speed",
+				 &plat->mac_port_sel_speed);
 
 	plat->axi = stmmac_axi_setup(pdev);
 
-- 
2.17.1