[PATCH AUTOSEL 4.14 015/371] mlxsw: reg: QEEC: Add minimum shaper fields

[PATCH AUTOSEL 4.14 015/371] mlxsw: reg: QEEC: Add minimum shaper fields

[Sasha Levin]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit 8b931821aa04823e2e5df0ae93937baabbd23286 ]

Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable
configuration of minimum shaper.

Increase the QEEC length to 0x20 as well: that's the length that the
register has had for a long time now, but with the configurations that
mlxsw typically exercises, the firmware tolerated 0x1C-sized packets.
With mise=true however, FW rejects packets unless they have the full
required length.

Fixes: b9b7cee40579 ("mlxsw: reg: Add QoS ETS Element Configuration register")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 8ab7a4f98a07..e7974ba06432 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -2452,7 +2452,7 @@ static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port,
  * Configures the ETS elements.
  */
 #define MLXSW_REG_QEEC_ID 0x400D
-#define MLXSW_REG_QEEC_LEN 0x1C
+#define MLXSW_REG_QEEC_LEN 0x20
 
 MLXSW_REG_DEFINE(qeec, MLXSW_REG_QEEC_ID, MLXSW_REG_QEEC_LEN);
 
@@ -2494,6 +2494,15 @@ MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8);
  */
 MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8);
 
+/* reg_qeec_mise
+ * Min shaper configuration enable. Enables configuration of the min
+ * shaper on this ETS element
+ * 0 - Disable
+ * 1 - Enable
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, mise, 0x0C, 31, 1);
+
 enum {
 	MLXSW_REG_QEEC_BYTES_MODE,
 	MLXSW_REG_QEEC_PACKETS_MODE,
@@ -2510,6 +2519,17 @@ enum {
  */
 MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1);
 
+/* The smallest permitted min shaper rate. */
+#define MLXSW_REG_QEEC_MIS_MIN	200000		/* Kbps */
+
+/* reg_qeec_min_shaper_rate
+ * Min shaper information rate.
+ * For CPU port, can only be configured for port hierarchy.
+ * When in bytes mode, value is specified in units of 1000bps.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, min_shaper_rate, 0x0C, 0, 28);
+
 /* reg_qeec_mase
  * Max shaper configuration enable. Enables configuration of the max
  * shaper on this ETS element.
-- 
2.20.1

[PATCH AUTOSEL 4.14 020/371] net: phy: Fix not to call phy_resume() if PHY is not attached

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]

This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.

Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a98c227a4c2e..99dae55cd334 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -76,7 +76,7 @@ static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
 #ifdef CONFIG_PM
-static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend)
 {
 	struct device_driver *drv = phydev->mdio.dev.driver;
 	struct phy_driver *phydrv = to_phy_driver(drv);
@@ -88,10 +88,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	/* PHY not attached? May suspend if the PHY has not already been
 	 * suspended as part of a prior call to phy_disconnect() ->
 	 * phy_detach() -> phy_suspend() because the parent netdev might be the
-	 * MDIO bus driver and clock gated at this point.
+	 * MDIO bus driver and clock gated at this point. Also may resume if
+	 * PHY is not attached.
 	 */
 	if (!netdev)
-		return !phydev->suspended;
+		return suspend ? !phydev->suspended : phydev->suspended;
 
 	/* Don't suspend PHY if the attached netdev parent may wakeup.
 	 * The parent may point to a PCI device, as in tg3 driver.
@@ -121,7 +122,7 @@ static int mdio_bus_phy_suspend(struct device *dev)
 	if (phydev->attached_dev && phydev->adjust_link)
 		phy_stop_machine(phydev);
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, true))
 		return 0;
 
 	return phy_suspend(phydev);
@@ -132,7 +133,7 @@ static int mdio_bus_phy_resume(struct device *dev)
 	struct phy_device *phydev = to_phy_device(dev);
 	int ret;
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, false))
 		goto no_resume;
 
 	ret = phy_resume(phydev);
-- 
2.20.1

[PATCH AUTOSEL 4.14 034/371] vxlan: changelink: Fix handling of default remotes

[Sasha Levin]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit ce5e098f7a10b4bf8e948c12fa350320c5c3afad ]

Default remotes are stored as FDB entries with an Ethernet address of
00:00:00:00:00:00. When a request is made to change a remote address of
a VXLAN device, vxlan_changelink() first deletes the existing default
remote, and then creates a new FDB entry.

This works well as long as the list of default remotes matches exactly
the configuration of a VXLAN remote address. Thus when the VXLAN device
has a remote of X, there should be exactly one default remote FDB entry
X. If the VXLAN device has no remote address, there should be no such
entry.

Besides using "ip link set", it is possible to manipulate the list of
default remotes by using the "bridge fdb". It is therefore easy to break
the above condition. Under such circumstances, the __vxlan_fdb_delete()
call doesn't delete the FDB entry itself, but just one remote. The
following vxlan_fdb_create() then creates a new FDB entry, leading to a
situation where two entries exist for the address 00:00:00:00:00:00,
each with a different subset of default remotes.

An even more obvious breakage rooted in the same cause can be observed
when a remote address is configured for a VXLAN device that did not have
one before. In that case vxlan_changelink() doesn't remove any remote,
and just creates a new FDB entry for the new address:

$ ip link add name vx up type vxlan id 2000 dstport 4789
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent
$ ip link set dev vx type vxlan remote 192.0.2.30
$ bridge fdb sh dev vx | grep 00:00:00:00:00:00
00:00:00:00:00:00 dst 192.0.2.30 self permanent <- new entry, 1 rdst
00:00:00:00:00:00 dst 192.0.2.20 self permanent <- orig. entry, 2 rdsts
00:00:00:00:00:00 dst 192.0.2.30 self permanent

To fix this, instead of calling vxlan_fdb_create() directly, defer to
vxlan_fdb_update(). That has logic to handle the duplicates properly.
Additionally, it also handles notifications, so drop that call from
changelink as well.

Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 5aa7d5091f4d..4d97a7b5fe3c 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -3494,7 +3494,6 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[],
 	struct vxlan_rdst *dst = &vxlan->default_dst;
 	struct vxlan_rdst old_dst;
 	struct vxlan_config conf;
-	struct vxlan_fdb *f = NULL;
 	int err;
 
 	err = vxlan_nl2conf(tb, data,
@@ -3520,19 +3519,19 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[],
 					   old_dst.remote_ifindex, 0);
 
 		if (!vxlan_addr_any(&dst->remote_ip)) {
-			err = vxlan_fdb_create(vxlan, all_zeros_mac,
+			err = vxlan_fdb_update(vxlan, all_zeros_mac,
 					       &dst->remote_ip,
 					       NUD_REACHABLE | NUD_PERMANENT,
+					       NLM_F_APPEND | NLM_F_CREATE,
 					       vxlan->cfg.dst_port,
 					       dst->remote_vni,
 					       dst->remote_vni,
 					       dst->remote_ifindex,
-					       NTF_SELF, &f);
+					       NTF_SELF);
 			if (err) {
 				spin_unlock_bh(&vxlan->hash_lock);
 				return err;
 			}
-			vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH);
 		}
 		spin_unlock_bh(&vxlan->hash_lock);
 	}
-- 
2.20.1