[PATCH AUTOSEL 4.9 009/251] mlxsw: reg: QEEC: Add minimum shaper fields

[PATCH AUTOSEL 4.9 009/251] mlxsw: reg: QEEC: Add minimum shaper fields

[Sasha Levin]

From: Petr Machata <petrm@mellanox.com>

[ Upstream commit 8b931821aa04823e2e5df0ae93937baabbd23286 ]

Add QEEC.mise (minimum shaper enable) and QEEC.min_shaper_rate to enable
configuration of minimum shaper.

Increase the QEEC length to 0x20 as well: that's the length that the
register has had for a long time now, but with the configurations that
mlxsw typically exercises, the firmware tolerated 0x1C-sized packets.
With mise=true however, FW rejects packets unless they have the full
required length.

Fixes: b9b7cee40579 ("mlxsw: reg: Add QoS ETS Element Configuration register")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index b2a745b579fd..fdc69218c8ca 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1873,7 +1873,7 @@ static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port,
  * Configures the ETS elements.
  */
 #define MLXSW_REG_QEEC_ID 0x400D
-#define MLXSW_REG_QEEC_LEN 0x1C
+#define MLXSW_REG_QEEC_LEN 0x20
 
 static const struct mlxsw_reg_info mlxsw_reg_qeec = {
 	.id = MLXSW_REG_QEEC_ID,
@@ -1918,6 +1918,15 @@ MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8);
  */
 MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8);
 
+/* reg_qeec_mise
+ * Min shaper configuration enable. Enables configuration of the min
+ * shaper on this ETS element
+ * 0 - Disable
+ * 1 - Enable
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, mise, 0x0C, 31, 1);
+
 enum {
 	MLXSW_REG_QEEC_BYTES_MODE,
 	MLXSW_REG_QEEC_PACKETS_MODE,
@@ -1934,6 +1943,17 @@ enum {
  */
 MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1);
 
+/* The smallest permitted min shaper rate. */
+#define MLXSW_REG_QEEC_MIS_MIN	200000		/* Kbps */
+
+/* reg_qeec_min_shaper_rate
+ * Min shaper information rate.
+ * For CPU port, can only be configured for port hierarchy.
+ * When in bytes mode, value is specified in units of 1000bps.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qeec, min_shaper_rate, 0x0C, 0, 28);
+
 /* reg_qeec_mase
  * Max shaper configuration enable. Enables configuration of the max
  * shaper on this ETS element.
-- 
2.20.1

[PATCH AUTOSEL 4.9 013/251] net: phy: Fix not to call phy_resume() if PHY is not attached

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit ef1b5bf506b1f0ee3edc98533e1f3ecb105eb46a ]

This patch fixes an issue that mdio_bus_phy_resume() doesn't call
phy_resume() if the PHY is not attached.

Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 3289fd910c4a..487d0372a444 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -80,7 +80,7 @@ static LIST_HEAD(phy_fixup_list);
 static DEFINE_MUTEX(phy_fixup_lock);
 
 #ifdef CONFIG_PM
-static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
+static bool mdio_bus_phy_may_suspend(struct phy_device *phydev, bool suspend)
 {
 	struct device_driver *drv = phydev->mdio.dev.driver;
 	struct phy_driver *phydrv = to_phy_driver(drv);
@@ -92,10 +92,11 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	/* PHY not attached? May suspend if the PHY has not already been
 	 * suspended as part of a prior call to phy_disconnect() ->
 	 * phy_detach() -> phy_suspend() because the parent netdev might be the
-	 * MDIO bus driver and clock gated at this point.
+	 * MDIO bus driver and clock gated at this point. Also may resume if
+	 * PHY is not attached.
 	 */
 	if (!netdev)
-		return !phydev->suspended;
+		return suspend ? !phydev->suspended : phydev->suspended;
 
 	/* Don't suspend PHY if the attached netdev parent may wakeup.
 	 * The parent may point to a PCI device, as in tg3 driver.
@@ -125,7 +126,7 @@ static int mdio_bus_phy_suspend(struct device *dev)
 	if (phydev->attached_dev && phydev->adjust_link)
 		phy_stop_machine(phydev);
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, true))
 		return 0;
 
 	return phy_suspend(phydev);
@@ -136,7 +137,7 @@ static int mdio_bus_phy_resume(struct device *dev)
 	struct phy_device *phydev = to_phy_device(dev);
 	int ret;
 
-	if (!mdio_bus_phy_may_suspend(phydev))
+	if (!mdio_bus_phy_may_suspend(phydev, false))
 		goto no_resume;
 
 	ret = phy_resume(phydev);
-- 
2.20.1