From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Yonglong Liu <liuyonglong@huawei.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.19 53/56] net: hns: fix soft lockup when there is not enough memory
Date: Fri, 24 Jan 2020 09:20:09 -0500 [thread overview]
Message-ID: <20200124142012.29752-53-sashal@kernel.org> (raw)
In-Reply-To: <20200124142012.29752-1-sashal@kernel.org>
From: Yonglong Liu <liuyonglong@huawei.com>
[ Upstream commit 49edd6a2c456150870ddcef5b7ed11b21d849e13 ]
When there is not enough memory and napi_alloc_skb() return NULL,
the HNS driver will print error message, and than try again, if
the memory is not enough for a while, huge error message and the
retry operation will cause soft lockup.
When napi_alloc_skb() return NULL because of no memory, we can
get a warn_alloc() call trace, so this patch deletes the error
message. We already use polling mode to handle irq, but the
retry operation will render the polling weight inactive, this
patch just return budget when the rx is not completed to avoid
dead loop.
Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance")
Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index 7f8cf809e02b5..024b08fafd3b2 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -569,7 +569,6 @@ static int hns_nic_poll_rx_skb(struct hns_nic_ring_data *ring_data,
skb = *out_skb = napi_alloc_skb(&ring_data->napi,
HNS_RX_HEAD_SIZE);
if (unlikely(!skb)) {
- netdev_err(ndev, "alloc rx skb fail\n");
ring->stats.sw_err_cnt++;
return -ENOMEM;
}
@@ -1060,7 +1059,6 @@ static int hns_nic_common_poll(struct napi_struct *napi, int budget)
container_of(napi, struct hns_nic_ring_data, napi);
struct hnae_ring *ring = ring_data->ring;
-try_again:
clean_complete += ring_data->poll_one(
ring_data, budget - clean_complete,
ring_data->ex_process);
@@ -1070,7 +1068,7 @@ try_again:
napi_complete(napi);
ring->q->handle->dev->ops->toggle_ring_irq(ring, 0);
} else {
- goto try_again;
+ return budget;
}
}
--
2.20.1
next prev parent reply other threads:[~2020-01-24 14:28 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-24 14:19 [PATCH AUTOSEL 4.19 01/56] batman-adv: Fix DAT candidate selection on little endian systems Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 14/56] mac80211: mesh: restrict airtime metric to peered established plinks Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 20/56] ixgbevf: Remove limit of 10 entries for unicast filter list Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 21/56] ixgbe: Fix calculation of queue with VFs and flow director on interface flap Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 22/56] igb: Fix SGMII SFP module discovery for 100FX/LX Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 23/56] sh_eth: check sh_eth_cpu_data::dual_port when dumping registers Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 29/56] netfilter: fix a use-after-free in mtype_destroy() Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 30/56] netfilter: arp_tables: init netns pointer in xt_tgdtor_param struct Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 31/56] qmi_wwan: Add support for Quectel RM500Q Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 34/56] ptp: free ptp device pin descriptors properly Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 35/56] net: usb: lan78xx: limit size of local TSO packets Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 36/56] r8152: add missing endpoint sanity check Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 37/56] wireless: fix enabling channel 12 for custom regulatory domain Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 38/56] cfg80211: Fix radar event during another phy CAC Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 39/56] mac80211: Fix TKIP replay protection immediately after key setup Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 40/56] wireless: wext: avoid gcc -O3 warning Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 41/56] cfg80211: check for set_wiphy_params Sasha Levin
2020-01-24 14:19 ` [PATCH AUTOSEL 4.19 43/56] mlxsw: spectrum: Wipe xstats.backlog of down ports Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 44/56] hv_netvsc: Fix memory leak when removing rndis device Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 45/56] bpf: Fix incorrect verifier simulation of ARSH under ALU32 Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 46/56] net/wan/fsl_ucc_hdlc: fix out of bounds write on array utdm_info Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 48/56] netfilter: nf_tables: store transaction list locally while requesting module Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 49/56] netfilter: nft_tunnel: fix null-attribute check Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 50/56] netfilter: nft_tunnel: ERSPAN_VERSION must not be null Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 51/56] netfilter: nf_tables: remove WARN and add NLA_STRING upper limits Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 52/56] netfilter: nf_tables: fix flowtable list del corruption Sasha Levin
2020-01-24 14:20 ` Sasha Levin [this message]
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 54/56] net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec Sasha Levin
2020-01-24 14:20 ` [PATCH AUTOSEL 4.19 55/56] bnxt_en: Fix ipv6 RFS filter matching logic Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200124142012.29752-53-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=liuyonglong@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).