From: Andrew Lunn <andrew@lunn.ch>
To: Dan Murphy <dmurphy@ti.com>
Cc: f.fainelli@gmail.com, hkallweit1@gmail.com,
linux@armlinux.org.uk, davem@davemloft.net,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org, afd@ti.com
Subject: Re: [PATCH net-master] net: phy: dp83848: Add the TI TLK05/06 PHY ID
Date: Wed, 19 Feb 2020 19:48:47 +0100 [thread overview]
Message-ID: <20200219184847.GD3281@lunn.ch> (raw)
In-Reply-To: <20200219181613.5898-1-dmurphy@ti.com>
On Wed, Feb 19, 2020 at 12:16:13PM -0600, Dan Murphy wrote:
> Add the TLK05/06 PHY ID to the DP83848 driver. The TI website indicates
> that the DP83822 device is a drop in replacement for the TLK05 device
> but the TLK device does not have WoL support. The TLK device is
> register compatible to the DP83848 and the DP83848 does not support WoL
> either. So this PHY can be associated with the DP83848 driver.
>
> The initial TLKx PHY ID in the driver is a legacy ID and the public data
> sheet indicates a new PHY ID. So not to break any kernels out there
> both IDs will continue to be supported in this driver.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> drivers/net/phy/dp83848.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
> index 54c7c1b44e4d..66907cfa816a 100644
> --- a/drivers/net/phy/dp83848.c
> +++ b/drivers/net/phy/dp83848.c
> @@ -12,6 +12,7 @@
> #define TI_DP83620_PHY_ID 0x20005ce0
> #define NS_DP83848C_PHY_ID 0x20005c90
> #define TLK10X_PHY_ID 0x2000a210
> +#define TLK105_06_PHY_ID 0x2000a211
>
> /* Registers */
> #define DP83848_MICR 0x11 /* MII Interrupt Control Register */
> @@ -85,6 +86,7 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
> { NS_DP83848C_PHY_ID, 0xfffffff0 },
> { TI_DP83620_PHY_ID, 0xfffffff0 },
> { TLK10X_PHY_ID, 0xfffffff0 },
> + { TLK105_06_PHY_ID, 0xfffffff0 },
> { }
> };
> MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
> @@ -115,6 +117,8 @@ static struct phy_driver dp83848_driver[] = {
> dp83848_config_init),
> DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY",
> NULL),
> + DP83848_PHY_DRIVER(TLK105_06_PHY_ID, "TI TLK105/06 10/100 Mbps PHY",
> + NULL),
I'm pretty sure Andrew's comment is correct. Due to the mask, the
TLK10X_PHY_ID entry will hit.
What you can do is change the order and the mask. Put TLK105_06_PHY_ID
before TLK10X_PHY_ID and have an exact match, no mask.
Andrew
next prev parent reply other threads:[~2020-02-19 18:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-19 18:16 [PATCH net-master] net: phy: dp83848: Add the TI TLK05/06 PHY ID Dan Murphy
2020-02-19 18:40 ` Andrew F. Davis
2020-02-19 18:48 ` Andrew Lunn [this message]
2020-02-19 18:58 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200219184847.GD3281@lunn.ch \
--to=andrew@lunn.ch \
--cc=afd@ti.com \
--cc=davem@davemloft.net \
--cc=dmurphy@ti.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).