[PATCH AUTOSEL 4.19 05/25] mac80211: consider more elements in parsing CRC

[PATCH AUTOSEL 4.19 05/25] mac80211: consider more elements in parsing CRC

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit a04564c99bb4a92f805a58e56b2d22cc4978f152 ]

We only use the parsing CRC for checking if a beacon changed,
and elements with an ID > 63 cannot be represented in the
filter. Thus, like we did before with WMM and Cisco vendor
elements, just statically add these forgotten items to the
CRC:
 - WLAN_EID_VHT_OPERATION
 - WLAN_EID_OPMODE_NOTIF

I guess that in most cases when VHT/HE operation change, the HT
operation also changed, and so the change was picked up, but we
did notice that pure operating mode notification changes were
ignored.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi
[restrict to VHT for the mac80211 branch]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/util.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index f101a6460b44b..7fa9871b1db9f 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -945,16 +945,22 @@ u32 ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 				elem_parse_failed = true;
 			break;
 		case WLAN_EID_VHT_OPERATION:
-			if (elen >= sizeof(struct ieee80211_vht_operation))
+			if (elen >= sizeof(struct ieee80211_vht_operation)) {
 				elems->vht_operation = (void *)pos;
-			else
-				elem_parse_failed = true;
+				if (calc_crc)
+					crc = crc32_be(crc, pos - 2, elen + 2);
+				break;
+			}
+			elem_parse_failed = true;
 			break;
 		case WLAN_EID_OPMODE_NOTIF:
-			if (elen > 0)
+			if (elen > 0) {
 				elems->opmode_notif = pos;
-			else
-				elem_parse_failed = true;
+				if (calc_crc)
+					crc = crc32_be(crc, pos - 2, elen + 2);
+				break;
+			}
+			elem_parse_failed = true;
 			break;
 		case WLAN_EID_MESH_ID:
 			elems->mesh_id = pos;
-- 
2.20.1

[PATCH AUTOSEL 4.19 06/25] cfg80211: check wiphy driver existence for drvinfo report

[Sasha Levin]

From: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>

[ Upstream commit bfb7bac3a8f47100ebe7961bd14e924c96e21ca7 ]

When preparing ethtool drvinfo, check if wiphy driver is defined
before dereferencing it. Driver may not exist, e.g. if wiphy is
attached to a virtual platform device.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200203105644.28875-1-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/ethtool.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/wireless/ethtool.c b/net/wireless/ethtool.c
index a9c0f368db5d2..24e18405cdb48 100644
--- a/net/wireless/ethtool.c
+++ b/net/wireless/ethtool.c
@@ -7,9 +7,13 @@
 void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct device *pdev = wiphy_dev(wdev->wiphy);
 
-	strlcpy(info->driver, wiphy_dev(wdev->wiphy)->driver->name,
-		sizeof(info->driver));
+	if (pdev->driver)
+		strlcpy(info->driver, pdev->driver->name,
+			sizeof(info->driver));
+	else
+		strlcpy(info->driver, "N/A", sizeof(info->driver));
 
 	strlcpy(info->version, init_utsname()->release, sizeof(info->version));
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/25] qmi_wwan: re-add DW5821e pre-production variant

[Sasha Levin]

From: Bjørn Mork <bjorn@mork.no>

[ Upstream commit 88bf54603f6f2c137dfee1abf6436ceac3528d2d ]

Commit f25e1392fdb5 removed the support for the pre-production variant
of the Dell DW5821e to avoid probing another USB interface unnecessarily.
However, the pre-production samples are found in the wild, and this lack
of support is causing problems for users of such samples.  It is therefore
necessary to support both variants.

Matching on both interfaces 0 and 1 is not expected to cause any problem
with either variant, as only the QMI function will be probed successfully
on either.  Interface 1 will be rejected based on the HID class for the
production variant:

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

And interface 0 will be rejected based on too few endpoints for the
pre-production variant:

T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2
P: Vendor=413c ProdID=81d7 Rev= 3.18
S: Manufacturer=DELL
S: Product=DW5821e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

Fixes: f25e1392fdb5 ("qmi_wwan: fix interface number for DW5821e production firmware")
Link: https://whrl.pl/Rf0vNk
Reported-by: Lars Melin <larsm17@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 13c8788e3b6b2..f489df377f5d2 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1298,6 +1298,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x413c, 0x81b6, 8)},	/* Dell Wireless 5811e */
 	{QMI_FIXED_INTF(0x413c, 0x81b6, 10)},	/* Dell Wireless 5811e */
 	{QMI_FIXED_INTF(0x413c, 0x81d7, 0)},	/* Dell Wireless 5821e */
+	{QMI_FIXED_INTF(0x413c, 0x81d7, 1)},	/* Dell Wireless 5821e preproduction config */
 	{QMI_FIXED_INTF(0x413c, 0x81e0, 0)},	/* Dell Wireless 5821e with eSIM support*/
 	{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
 	{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},	/* HP lt4120 Snapdragon X5 LTE */
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/25] qmi_wwan: unconditionally reject 2 ep interfaces

[Sasha Levin]

From: Bjørn Mork <bjorn@mork.no>

[ Upstream commit 00516d13d4cfa56ce39da144db2dbf08b09b9357 ]

We have been using the fact that the QMI and DIAG functions
usually are the only ones with class/subclass/protocol being
ff/ff/ff on Quectel modems. This has allowed us to match the
QMI function without knowing the exact interface number,
which can vary depending on firmware configuration.

The ability to silently reject the DIAG function, which is
usually handled by the option driver, is important for this
method to work.  This is done based on the knowledge that it
has exactly 2 bulk endpoints.  QMI function control interfaces
will have either 3 or 1 endpoint. This rule is universal so
the quirk condition can be removed.

The fixed layouts known from the Gobi1k and Gobi2k modems
have been gradually replaced by more dynamic layouts, and
many vendors now use configurable layouts without changing
device IDs.  Renaming the class/subclass/protocol matching
macro makes it more obvious that this is now not Quectel
specific anymore.

Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 42 ++++++++++++++------------------------
 1 file changed, 15 insertions(+), 27 deletions(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index f489df377f5d2..a04f8577d9f21 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -63,7 +63,6 @@ enum qmi_wwan_flags {
 
 enum qmi_wwan_quirks {
 	QMI_WWAN_QUIRK_DTR = 1 << 0,	/* needs "set DTR" request */
-	QMI_WWAN_QUIRK_QUECTEL_DYNCFG = 1 << 1,	/* check num. endpoints */
 };
 
 struct qmimux_hdr {
@@ -853,16 +852,6 @@ static const struct driver_info	qmi_wwan_info_quirk_dtr = {
 	.data           = QMI_WWAN_QUIRK_DTR,
 };
 
-static const struct driver_info	qmi_wwan_info_quirk_quectel_dyncfg = {
-	.description	= "WWAN/QMI device",
-	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
-	.bind		= qmi_wwan_bind,
-	.unbind		= qmi_wwan_unbind,
-	.manage_power	= qmi_wwan_manage_power,
-	.rx_fixup       = qmi_wwan_rx_fixup,
-	.data           = QMI_WWAN_QUIRK_DTR | QMI_WWAN_QUIRK_QUECTEL_DYNCFG,
-};
-
 #define HUAWEI_VENDOR_ID	0x12D1
 
 /* map QMI/wwan function by a fixed interface number */
@@ -883,14 +872,18 @@ static const struct driver_info	qmi_wwan_info_quirk_quectel_dyncfg = {
 #define QMI_GOBI_DEVICE(vend, prod) \
 	QMI_FIXED_INTF(vend, prod, 0)
 
-/* Quectel does not use fixed interface numbers on at least some of their
- * devices. We need to check the number of endpoints to ensure that we bind to
- * the correct interface.
+/* Many devices have QMI and DIAG functions which are distinguishable
+ * from other vendor specific functions by class, subclass and
+ * protocol all being 0xff. The DIAG function has exactly 2 endpoints
+ * and is silently rejected when probed.
+ *
+ * This makes it possible to match dynamically numbered QMI functions
+ * as seen on e.g. many Quectel modems.
  */
-#define QMI_QUIRK_QUECTEL_DYNCFG(vend, prod) \
+#define QMI_MATCH_FF_FF_FF(vend, prod) \
 	USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_VENDOR_SPEC, \
 				      USB_SUBCLASS_VENDOR_SPEC, 0xff), \
-	.driver_info = (unsigned long)&qmi_wwan_info_quirk_quectel_dyncfg
+	.driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
 
 static const struct usb_device_id products[] = {
 	/* 1. CDC ECM like devices match on the control interface */
@@ -996,10 +989,10 @@ static const struct usb_device_id products[] = {
 		USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
 		.driver_info = (unsigned long)&qmi_wwan_info,
 	},
-	{QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0125)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
-	{QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0306)},	/* Quectel EP06/EG06/EM06 */
-	{QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
-	{QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0125)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0306)},	/* Quectel EP06/EG06/EM06 */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
 
 	/* 3. Combined interface devices matching on interface number */
 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
@@ -1390,7 +1383,6 @@ static int qmi_wwan_probe(struct usb_interface *intf,
 {
 	struct usb_device_id *id = (struct usb_device_id *)prod;
 	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
-	const struct driver_info *info;
 
 	/* Workaround to enable dynamic IDs.  This disables usbnet
 	 * blacklisting functionality.  Which, if required, can be
@@ -1426,12 +1418,8 @@ static int qmi_wwan_probe(struct usb_interface *intf,
 	 * different. Ignore the current interface if the number of endpoints
 	 * equals the number for the diag interface (two).
 	 */
-	info = (void *)id->driver_info;
-
-	if (info->data & QMI_WWAN_QUIRK_QUECTEL_DYNCFG) {
-		if (desc->bNumEndpoints == 2)
-			return -ENODEV;
-	}
+	if (desc->bNumEndpoints == 2)
+		return -ENODEV;
 
 	return usbnet_probe(intf, id);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/25] net: ena: fix potential crash when rxfh key is NULL

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit 91a65b7d3ed8450f31ab717a65dcb5f9ceb5ab02 ]

When ethtool -X is called without an hkey, ena_com_fill_hash_function()
is called with key=NULL, which is passed to memcpy causing a crash.

This commit fixes this issue by checking key is not NULL.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 92261c946e2a3..c9b21306cf6c4 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -2075,15 +2075,16 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
 
 	switch (func) {
 	case ENA_ADMIN_TOEPLITZ:
-		if (key_len > sizeof(hash_key->key)) {
-			pr_err("key len (%hu) is bigger than the max supported (%zu)\n",
-			       key_len, sizeof(hash_key->key));
-			return -EINVAL;
+		if (key) {
+			if (key_len != sizeof(hash_key->key)) {
+				pr_err("key len (%hu) doesn't equal the supported size (%zu)\n",
+				       key_len, sizeof(hash_key->key));
+				return -EINVAL;
+			}
+			memcpy(hash_key->key, key, key_len);
+			rss->hash_init_val = init_val;
+			hash_key->keys_num = key_len >> 2;
 		}
-
-		memcpy(hash_key->key, key, key_len);
-		rss->hash_init_val = init_val;
-		hash_key->keys_num = key_len >> 2;
 		break;
 	case ENA_ADMIN_CRC32:
 		rss->hash_init_val = init_val;
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/25] net: ena: fix uses of round_jiffies()

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit 2a6e5fa2f4c25b66c763428a3e65363214946931 ]

>From the documentation of round_jiffies():
"Rounds a time delta  in the future (in jiffies) up or down to
(approximately) full seconds. This is useful for timers for which
the exact time they fire does not matter too much, as long as
they fire approximately every X seconds.
By rounding these timers to whole seconds, all such timers will fire
at the same time, rather than at various times spread out. The goal
of this is to have the CPU wake up less, which saves power."

There are 2 parts to this patch:
================================
Part 1:
-------
In our case we need timer_service to be called approximately every
X=1 seconds, and the exact time does not matter, so using round_jiffies()
is the right way to go.

Therefore we add round_jiffies() to the mod_timer() in ena_timer_service().

Part 2:
-------
round_jiffies() is used in check_for_missing_keep_alive() when
getting the jiffies of the expiration of the keep_alive timeout. Here it
is actually a mistake to use round_jiffies() because we want the exact
time when keep_alive should expire and not an approximate rounded time,
which can cause early, false positive, timeouts.

Therefore we remove round_jiffies() in the calculation of
keep_alive_expired() in check_for_missing_keep_alive().

Fixes: 82ef30f13be0 ("net: ena: add hardware hints capability to the driver")
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 9afb19ebba580..8736718b17359 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -2847,8 +2847,8 @@ static void check_for_missing_keep_alive(struct ena_adapter *adapter)
 	if (adapter->keep_alive_timeout == ENA_HW_HINTS_NO_TIMEOUT)
 		return;
 
-	keep_alive_expired = round_jiffies(adapter->last_keep_alive_jiffies +
-					   adapter->keep_alive_timeout);
+	keep_alive_expired = adapter->last_keep_alive_jiffies +
+			     adapter->keep_alive_timeout;
 	if (unlikely(time_is_before_jiffies(keep_alive_expired))) {
 		netif_err(adapter, drv, adapter->netdev,
 			  "Keep alive watchdog timeout.\n");
@@ -2950,7 +2950,7 @@ static void ena_timer_service(struct timer_list *t)
 	}
 
 	/* Reset the timer */
-	mod_timer(&adapter->timer_service, jiffies + HZ);
+	mod_timer(&adapter->timer_service, round_jiffies(jiffies + HZ));
 }
 
 static int ena_calc_io_queue_num(struct pci_dev *pdev,
-- 
2.20.1

[PATCH AUTOSEL 4.19 15/25] net: ena: add missing ethtool TX timestamping indication

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit cf6d17fde93bdda23c9b02dd5906a12bf8c55209 ]

Current implementation of the driver calls skb_tx_timestamp()to add a
software tx timestamp to the skb, however the software-transmit capability
is not reported in ethtool -T.

This commit updates the ethtool structure to report the software-transmit
capability in ethtool -T using the standard ethtool_op_get_ts_info().
This function reports all software timestamping capabilities (tx and rx),
as well as setting phc_index = -1. phc_index is the index of the PTP
hardware clock device that will be used for hardware timestamps. Since we
don't have such a device in ENA, using the default -1 value is the correct
setting.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Ezequiel Lara Gomez <ezegomez@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
index eb9e07fa427ee..237fbcac734f5 100644
--- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c
+++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
@@ -817,6 +817,7 @@ static const struct ethtool_ops ena_ethtool_ops = {
 	.get_channels		= ena_get_channels,
 	.get_tunable		= ena_get_tunable,
 	.set_tunable		= ena_set_tunable,
+	.get_ts_info            = ethtool_op_get_ts_info,
 };
 
 void ena_set_ethtool_ops(struct net_device *netdev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/25] net: ena: fix incorrect default RSS key

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit 0d1c3de7b8c78a5e44b74b62ede4a63629f5d811 ]

Bug description:
When running "ethtool -x <if_name>" the key shows up as all zeros.

When we use "ethtool -X <if_name> hfunc toeplitz hkey <some:random:key>" to
set the key and then try to retrieve it using "ethtool -x <if_name>" then
we return the correct key because we return the one we saved.

Bug cause:
We don't fetch the key from the device but instead return the key
that we have saved internally which is by default set to zero upon
allocation.

Fix:
This commit fixes the issue by initializing the key to a random value
using netdev_rss_key_fill().

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 15 +++++++++++++++
 drivers/net/ethernet/amazon/ena/ena_com.h |  1 +
 2 files changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index c9b21306cf6c4..ebc36d15441ce 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -842,6 +842,19 @@ static int ena_com_get_feature(struct ena_com_dev *ena_dev,
 				      0);
 }
 
+static void ena_com_hash_key_fill_default_key(struct ena_com_dev *ena_dev)
+{
+	struct ena_admin_feature_rss_flow_hash_control *hash_key =
+		(ena_dev->rss).hash_key;
+
+	netdev_rss_key_fill(&hash_key->key, sizeof(hash_key->key));
+	/* The key is stored in the device in u32 array
+	 * as well as the API requires the key to be passed in this
+	 * format. Thus the size of our array should be divided by 4
+	 */
+	hash_key->keys_num = sizeof(hash_key->key) / sizeof(u32);
+}
+
 static int ena_com_hash_key_allocate(struct ena_com_dev *ena_dev)
 {
 	struct ena_rss *rss = &ena_dev->rss;
@@ -2409,6 +2422,8 @@ int ena_com_rss_init(struct ena_com_dev *ena_dev, u16 indr_tbl_log_size)
 	if (unlikely(rc))
 		goto err_hash_key;
 
+	ena_com_hash_key_fill_default_key(ena_dev);
+
 	rc = ena_com_hash_ctrl_init(ena_dev);
 	if (unlikely(rc))
 		goto err_hash_ctrl;
diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h
index 7b784f8a06a66..90fce5c0ca48a 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.h
+++ b/drivers/net/ethernet/amazon/ena/ena_com.h
@@ -42,6 +42,7 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 #include <linux/wait.h>
+#include <linux/netdevice.h>
 
 #include "ena_common_defs.h"
 #include "ena_admin_defs.h"
-- 
2.20.1

[PATCH AUTOSEL 4.19 17/25] net: ena: rss: fix failure to get indirection table

[Sasha Levin]

From: Sameeh Jubran <sameehj@amazon.com>

[ Upstream commit 0c8923c0a64fb5d14bebb9a9065d2dc25ac5e600 ]

On old hardware, getting / setting the hash function is not supported while
gettting / setting the indirection table is.

This commit enables us to still show the indirection table on older
hardwares by setting the hash function and key to NULL.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
index 237fbcac734f5..dc63aa912aebb 100644
--- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c
+++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
@@ -661,7 +661,21 @@ static int ena_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
 	if (rc)
 		return rc;
 
+	/* We call this function in order to check if the device
+	 * supports getting/setting the hash function.
+	 */
 	rc = ena_com_get_hash_function(adapter->ena_dev, &ena_func, key);
+
+	if (rc) {
+		if (rc == -EOPNOTSUPP) {
+			key = NULL;
+			hfunc = NULL;
+			rc = 0;
+		}
+
+		return rc;
+	}
+
 	if (rc)
 		return rc;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/25] net: ena: rss: store hash function as values and not bits

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit 4844470d472d660c26149ad764da2406adb13423 ]

The device receives, stores and retrieves the hash function value as bits
and not as their enum value.

The bug:
* In ena_com_set_hash_function() we set
  cmd.u.flow_hash_func.selected_func to the bit value of rss->hash_func.
 (1 << rss->hash_func)
* In ena_com_get_hash_function() we retrieve the hash function and store
  it's bit value in rss->hash_func. (Now the bit value of rss->hash_func
  is stored in rss->hash_func instead of it's enum value)

The fix:
This commit fixes the issue by converting the retrieved hash function
values from the device to the matching enum value of the set bit using
ffs(). ffs() finds the first set bit's index in a word. Since the function
returns 1 for the LSB's index, we need to subtract 1 from the returned
value (note that BIT(0) is 1).

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index ebc36d15441ce..397fb49156a9a 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -2134,7 +2134,11 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
 	if (unlikely(rc))
 		return rc;
 
-	rss->hash_func = get_resp.u.flow_hash_func.selected_func;
+	/* ffs() returns 1 in case the lsb is set */
+	rss->hash_func = ffs(get_resp.u.flow_hash_func.selected_func);
+	if (rss->hash_func)
+		rss->hash_func--;
+
 	if (func)
 		*func = rss->hash_func;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 19/25] net: ena: fix incorrectly saving queue numbers when setting RSS indirection table

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit 92569fd27f5cb0ccbdf7c7d70044b690e89a0277 ]

The indirection table has the indices of the Rx queues. When we store it
during set indirection operation, we convert the indices to our internal
representation of the indices.

Our internal representation of the indices is: even indices for Tx and
uneven indices for Rx, where every Tx/Rx pair are in a consecutive order
starting from 0. For example if the driver has 3 queues (3 for Tx and 3
for Rx) then the indices are as follows:
0  1  2  3  4  5
Tx Rx Tx Rx Tx Rx

The BUG:
The issue is that when we satisfy a get request for the indirection
table, we don't convert the indices back to the original representation.

The FIX:
Simply apply the inverse function for the indices of the indirection
table after we set it.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 24 ++++++++++++++++++-
 drivers/net/ethernet/amazon/ena/ena_netdev.h  |  2 ++
 2 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
index dc63aa912aebb..d6d79366b7fc1 100644
--- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c
+++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
@@ -649,6 +649,28 @@ static u32 ena_get_rxfh_key_size(struct net_device *netdev)
 	return ENA_HASH_KEY_SIZE;
 }
 
+static int ena_indirection_table_get(struct ena_adapter *adapter, u32 *indir)
+{
+	struct ena_com_dev *ena_dev = adapter->ena_dev;
+	int i, rc;
+
+	if (!indir)
+		return 0;
+
+	rc = ena_com_indirect_table_get(ena_dev, indir);
+	if (rc)
+		return rc;
+
+	/* Our internal representation of the indices is: even indices
+	 * for Tx and uneven indices for Rx. We need to convert the Rx
+	 * indices to be consecutive
+	 */
+	for (i = 0; i < ENA_RX_RSS_TABLE_SIZE; i++)
+		indir[i] = ENA_IO_RXQ_IDX_TO_COMBINED_IDX(indir[i]);
+
+	return rc;
+}
+
 static int ena_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
 			u8 *hfunc)
 {
@@ -657,7 +679,7 @@ static int ena_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
 	u8 func;
 	int rc;
 
-	rc = ena_com_indirect_table_get(adapter->ena_dev, indir);
+	rc = ena_indirection_table_get(adapter, indir);
 	if (rc)
 		return rc;
 
diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.h b/drivers/net/ethernet/amazon/ena/ena_netdev.h
index 7c7ae56c52cfd..f4783effe5c04 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.h
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.h
@@ -113,6 +113,8 @@
 
 #define ENA_IO_TXQ_IDX(q)	(2 * (q))
 #define ENA_IO_RXQ_IDX(q)	(2 * (q) + 1)
+#define ENA_IO_TXQ_IDX_TO_COMBINED_IDX(q)	((q) / 2)
+#define ENA_IO_RXQ_IDX_TO_COMBINED_IDX(q)	(((q) - 1) / 2)
 
 #define ENA_MGMNT_IRQ_IDX		0
 #define ENA_IO_IRQ_FIRST_IDX		1
-- 
2.20.1

[PATCH AUTOSEL 4.19 20/25] net: ena: ethtool: use correct value for crc32 hash

[Sasha Levin]

From: Sameeh Jubran <sameehj@amazon.com>

[ Upstream commit 886d2089276e40d460731765083a741c5c762461 ]

Up till kernel 4.11 there was no enum defined for crc32 hash in ethtool,
thus the xor enum was used for supporting crc32.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_ethtool.c b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
index d6d79366b7fc1..40354444ecbdf 100644
--- a/drivers/net/ethernet/amazon/ena/ena_ethtool.c
+++ b/drivers/net/ethernet/amazon/ena/ena_ethtool.c
@@ -706,7 +706,7 @@ static int ena_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
 		func = ETH_RSS_HASH_TOP;
 		break;
 	case ENA_ADMIN_CRC32:
-		func = ETH_RSS_HASH_XOR;
+		func = ETH_RSS_HASH_CRC32;
 		break;
 	default:
 		netif_err(adapter, drv, netdev,
@@ -752,7 +752,7 @@ static int ena_set_rxfh(struct net_device *netdev, const u32 *indir,
 	case ETH_RSS_HASH_TOP:
 		func = ENA_ADMIN_TOEPLITZ;
 		break;
-	case ETH_RSS_HASH_XOR:
+	case ETH_RSS_HASH_CRC32:
 		func = ENA_ADMIN_CRC32;
 		break;
 	default:
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/25] net: ena: ena-com.c: prevent NULL pointer dereference

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit c207979f5ae10ed70aff1bb13f39f0736973de99 ]

comp_ctx can be NULL in a very rare case when an admin command is executed
during the execution of ena_remove().

The bug scenario is as follows:

* ena_destroy_device() sets the comp_ctx to be NULL
* An admin command is executed before executing unregister_netdev(),
  this can still happen because our device can still receive callbacks
  from the netdev infrastructure such as ethtool commands.
* When attempting to access the comp_ctx, the bug occurs since it's set
  to NULL

Fix:
Added a check that comp_ctx is not NULL

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 397fb49156a9a..d52ab752b37f1 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -201,6 +201,11 @@ static inline void comp_ctxt_release(struct ena_com_admin_queue *queue,
 static struct ena_comp_ctx *get_comp_ctxt(struct ena_com_admin_queue *queue,
 					  u16 command_id, bool capture)
 {
+	if (unlikely(!queue->comp_ctx)) {
+		pr_err("Completion context is NULL\n");
+		return NULL;
+	}
+
 	if (unlikely(command_id >= queue->q_depth)) {
 		pr_err("command id is larger than the queue size. cmd_id: %u queue size %d\n",
 		       command_id, queue->q_depth);
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/25] enic: prevent waking up stopped tx queues over watchdog reset

[Sasha Levin]

From: Firo Yang <firo.yang@suse.com>

[ Upstream commit 0f90522591fd09dd201065c53ebefdfe3c6b55cb ]

Recent months, our customer reported several kernel crashes all
preceding with following message:
NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out
Error message of one of those crashes:
BUG: unable to handle kernel paging request at ffffffffa007e090

After analyzing severl vmcores, I found that most of crashes are
caused by memory corruption. And all the corrupted memory areas
are overwritten by data of network packets. Moreover, I also found
that the tx queues were enabled over watchdog reset.

After going through the source code, I found that in enic_stop(),
the tx queues stopped by netif_tx_disable() could be woken up over
a small time window between netif_tx_disable() and the
napi_disable() by the following code path:
napi_poll->
  enic_poll_msix_wq->
     vnic_cq_service->
        enic_wq_service->
           netif_wake_subqueue(enic->netdev, q_number)->
              test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)
In turn, upper netowrk stack could queue skb to ENIC NIC though
enic_hard_start_xmit(). And this might introduce some race condition.

Our customer comfirmed that this kind of kernel crash doesn't occur over
90 days since they applied this patch.

Signed-off-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cisco/enic/enic_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 733d9172425bf..026a3bd71204f 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2013,10 +2013,10 @@ static int enic_stop(struct net_device *netdev)
 		napi_disable(&enic->napi[i]);
 
 	netif_carrier_off(netdev);
-	netif_tx_disable(netdev);
 	if (vnic_dev_get_intr_mode(enic->vdev) == VNIC_DEV_INTR_MODE_MSIX)
 		for (i = 0; i < enic->wq_count; i++)
 			napi_disable(&enic->napi[enic_cq_wq(enic, i)]);
+	netif_tx_disable(netdev);
 
 	if (!enic_is_dynamic(enic) && !enic_is_sriov_vf(enic))
 		enic_dev_del_station_addr(enic);
-- 
2.20.1

[PATCH AUTOSEL 4.19 25/25] cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE

[Sasha Levin]

From: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>

[ Upstream commit ea75080110a4c1fa011b0a73cb8f42227143ee3e ]

The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute.
As a result, for strictly validated commands, it's assumed to not be
supported.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 823dea187691f..dfde06b8d25d1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -323,6 +323,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT] = { .type = NLA_FLAG },
 	[NL80211_ATTR_CONTROL_PORT_OVER_NL80211] = { .type = NLA_FLAG },
 	[NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG },
+	[NL80211_ATTR_STATUS_CODE] = { .type = NLA_U16 },
 	[NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 },
 	[NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 },
 	[NL80211_ATTR_PID] = { .type = NLA_U32 },
-- 
2.20.1