Re: [CFT 6/8] net: macb: use resolved link config in mac_link_up()

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Thu, Feb 20, 2020 at 10:18:28AM +0000, Russell King - ARM Linux admin wrote:
> On Wed, Feb 19, 2020 at 03:30:36PM +0100, Alexandre Belloni wrote:
> > Hi,
> > 
> > On 17/02/2020 17:24:21+0000, Russell King wrote:
> > > Convert the macb ethernet driver to use the finalised link
> > > parameters in mac_link_up() rather than the parameters in mac_config().
> > > 
> > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> > > ---
> > >  drivers/net/ethernet/cadence/macb.h      |  1 -
> > >  drivers/net/ethernet/cadence/macb_main.c | 46 ++++++++++++++----------
> > >  2 files changed, 27 insertions(+), 20 deletions(-)
> > > 
> > 
> > I did test the series after rebasing on top of the at91rm9200 fix.

Okay, I've updated my series, which will appear in my "phy" branch
later today.  However, what would you like me to do with the authorship
on the updated patch (I haven't yet checked what the differences were),
and can I add a tested-by to patch 1 for you?  I'll wait until you've
replied before pushing it out.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up