From: Taehee Yoo <ap420073@gmail.com>
To: davem@davemloft.net, kuba@kernel.org, subashab@codeaurora.org,
stranche@codeaurora.org, netdev@vger.kernel.org
Cc: ap420073@gmail.com
Subject: [PATCH net 06/10] net: rmnet: print error message when command fails
Date: Wed, 26 Feb 2020 17:47:40 +0000 [thread overview]
Message-ID: <20200226174740.5636-1-ap420073@gmail.com> (raw)
When rmnet netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
---
.../ethernet/qualcomm/rmnet/rmnet_config.c | 26 ++++++++++++-------
.../net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 10 +++----
.../net/ethernet/qualcomm/rmnet/rmnet_vnd.h | 3 ++-
3 files changed, 24 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
index c8b1bfe127ac..93745cd45c29 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -141,11 +141,10 @@ static int rmnet_newlink(struct net *src_net, struct net_device *dev,
}
real_dev = __dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK]));
- if (!real_dev || !dev)
+ if (!real_dev || !dev) {
+ NL_SET_ERR_MSG_MOD(extack, "link does not exist");
return -ENODEV;
-
- if (!data[IFLA_RMNET_MUX_ID])
- return -EINVAL;
+ }
ep = kzalloc(sizeof(*ep), GFP_ATOMIC);
if (!ep)
@@ -158,7 +157,7 @@ static int rmnet_newlink(struct net *src_net, struct net_device *dev,
goto err0;
port = rmnet_get_port_rtnl(real_dev);
- err = rmnet_vnd_newlink(mux_id, dev, port, real_dev, ep);
+ err = rmnet_vnd_newlink(mux_id, dev, port, real_dev, ep, extack);
if (err)
goto err1;
@@ -275,12 +274,16 @@ static int rmnet_rtnl_validate(struct nlattr *tb[], struct nlattr *data[],
{
u16 mux_id;
- if (!data || !data[IFLA_RMNET_MUX_ID])
+ if (!data || !data[IFLA_RMNET_MUX_ID]) {
+ NL_SET_ERR_MSG_MOD(extack, "MUX ID not specifies");
return -EINVAL;
+ }
mux_id = nla_get_u16(data[IFLA_RMNET_MUX_ID]);
- if (mux_id > (RMNET_MAX_LOGICAL_EP - 1))
+ if (mux_id > (RMNET_MAX_LOGICAL_EP - 1)) {
+ NL_SET_ERR_MSG_MOD(extack, "invalid MUX ID");
return -ERANGE;
+ }
return 0;
}
@@ -414,11 +417,16 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
/* If there is more than one rmnet dev attached, its probably being
* used for muxing. Skip the briding in that case
*/
- if (port->nr_rmnet_devs > 1)
+ if (port->nr_rmnet_devs > 1) {
+ NL_SET_ERR_MSG_MOD(extack, "more than one rmnet dev attached");
return -EINVAL;
+ }
- if (rmnet_is_real_dev_registered(slave_dev))
+ if (rmnet_is_real_dev_registered(slave_dev)) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "dev is already attached another rmnet dev");
return -EBUSY;
+ }
err = rmnet_register_real_device(slave_dev);
if (err)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index a26e76e9d382..90c19033ebe0 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
@@ -224,16 +224,16 @@ void rmnet_vnd_setup(struct net_device *rmnet_dev)
int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
struct rmnet_port *port,
struct net_device *real_dev,
- struct rmnet_endpoint *ep)
+ struct rmnet_endpoint *ep,
+ struct netlink_ext_ack *extack)
{
struct rmnet_priv *priv = netdev_priv(rmnet_dev);
int rc;
- if (ep->egress_dev)
- return -EINVAL;
-
- if (rmnet_get_endpoint(port, id))
+ if (rmnet_get_endpoint(port, id)) {
+ NL_SET_ERR_MSG_MOD(extack, "MUX ID already exists");
return -EBUSY;
+ }
rmnet_dev->hw_features = NETIF_F_RXCSUM;
rmnet_dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
index 54cbaf3c3bc4..d8fa76e8e9c4 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.h
@@ -11,7 +11,8 @@ int rmnet_vnd_do_flow_control(struct net_device *dev, int enable);
int rmnet_vnd_newlink(u8 id, struct net_device *rmnet_dev,
struct rmnet_port *port,
struct net_device *real_dev,
- struct rmnet_endpoint *ep);
+ struct rmnet_endpoint *ep,
+ struct netlink_ext_ack *extack);
int rmnet_vnd_dellink(u8 id, struct rmnet_port *port,
struct rmnet_endpoint *ep);
void rmnet_vnd_rx_fixup(struct sk_buff *skb, struct net_device *dev);
--
2.17.1
next reply other threads:[~2020-02-26 17:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-26 17:47 Taehee Yoo [this message]
2020-02-26 20:37 ` [PATCH net 06/10] net: rmnet: print error message when command fails subashab
2020-02-27 7:36 ` Taehee Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200226174740.5636-1-ap420073@gmail.com \
--to=ap420073@gmail.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stranche@codeaurora.org \
--cc=subashab@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).