From: Julian Wiedmann <jwi@linux.ibm.com>
To: David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
linux-s390 <linux-s390@vger.kernel.org>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
Ursula Braun <ubraun@linux.ibm.com>,
Julian Wiedmann <jwi@linux.ibm.com>
Subject: [PATCH net-next 8/8] s390/qeth: support configurable RX copybreak
Date: Thu, 27 Feb 2020 18:08:16 +0100 [thread overview]
Message-ID: <20200227170816.101286-9-jwi@linux.ibm.com> (raw)
In-Reply-To: <20200227170816.101286-1-jwi@linux.ibm.com>
Implement the ethtool hooks for the ETHTOOL_RX_COPYBREAK tunable.
The copybreak is stored into netdev_priv, so that we automatically go
back to the default value if the netdev is re-allocated.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core.h | 10 ++++++----
drivers/s390/net/qeth_core_main.c | 17 +++++++++++------
drivers/s390/net/qeth_ethtool.c | 31 +++++++++++++++++++++++++++++++
3 files changed, 48 insertions(+), 10 deletions(-)
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 9575a627a1e1..b7d64690ea38 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -189,6 +189,8 @@ struct qeth_vnicc_info {
#define QETH_IQD_MIN_TXQ 2 /* One for ucast, one for mcast. */
#define QETH_IQD_MCAST_TXQ 0
#define QETH_IQD_MIN_UCAST_TXQ 1
+
+#define QETH_RX_COPYBREAK (PAGE_SIZE >> 1)
#define QETH_IN_BUF_SIZE_DEFAULT 65536
#define QETH_IN_BUF_COUNT_DEFAULT 64
#define QETH_IN_BUF_COUNT_HSDEFAULT 128
@@ -219,9 +221,6 @@ struct qeth_vnicc_info {
#define QETH_HIGH_WATERMARK_PACK 5
#define QETH_WATERMARK_PACK_FUZZ 1
-/* large receive scatter gather copy break */
-#define QETH_RX_SG_CB (PAGE_SIZE >> 1)
-
struct qeth_hdr_layer3 {
__u8 id;
__u8 flags;
@@ -711,7 +710,6 @@ struct qeth_card_options {
struct qeth_vnicc_info vnicc; /* VNICC options */
int fake_broadcast;
enum qeth_discipline_id layer;
- int rx_sg_cb;
enum qeth_ipa_isolation_modes isolation;
enum qeth_ipa_isolation_modes prev_isolation;
int sniffer;
@@ -770,6 +768,10 @@ struct qeth_switch_info {
__u32 settings;
};
+struct qeth_priv {
+ unsigned int rx_copybreak;
+};
+
#define QETH_NAPI_WEIGHT NAPI_POLL_WEIGHT
struct qeth_card {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index cbd2b4c46ea4..1bcac50bb395 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1257,7 +1257,6 @@ static void qeth_set_initial_options(struct qeth_card *card)
{
card->options.route4.type = NO_ROUTER;
card->options.route6.type = NO_ROUTER;
- card->options.rx_sg_cb = QETH_RX_SG_CB;
card->options.isolation = ISOLATION_MODE_NONE;
card->options.cq = QETH_CQ_DISABLED;
card->options.layer = QETH_DISCIPLINE_UNDETERMINED;
@@ -5268,6 +5267,7 @@ static int qeth_extract_skb(struct qeth_card *card,
int *__offset)
{
struct qdio_buffer_element *element = *__element;
+ struct qeth_priv *priv = netdev_priv(card->dev);
struct qdio_buffer *buffer = qethbuffer->buffer;
struct napi_struct *napi = &card->napi;
unsigned int linear_len = 0;
@@ -5343,7 +5343,7 @@ static int qeth_extract_skb(struct qeth_card *card,
}
use_rx_sg = (card->options.cq == QETH_CQ_ENABLED) ||
- (skb_len > card->options.rx_sg_cb &&
+ (skb_len > READ_ONCE(priv->rx_copybreak) &&
!atomic_read(&card->force_alloc_skb) &&
!IS_OSN(card));
@@ -5892,25 +5892,30 @@ static void qeth_clear_dbf_list(void)
static struct net_device *qeth_alloc_netdev(struct qeth_card *card)
{
struct net_device *dev;
+ struct qeth_priv *priv;
switch (card->info.type) {
case QETH_CARD_TYPE_IQD:
- dev = alloc_netdev_mqs(0, "hsi%d", NET_NAME_UNKNOWN,
+ dev = alloc_netdev_mqs(sizeof(*priv), "hsi%d", NET_NAME_UNKNOWN,
ether_setup, QETH_MAX_QUEUES, 1);
break;
case QETH_CARD_TYPE_OSM:
- dev = alloc_etherdev(0);
+ dev = alloc_etherdev(sizeof(*priv));
break;
case QETH_CARD_TYPE_OSN:
- dev = alloc_netdev(0, "osn%d", NET_NAME_UNKNOWN, ether_setup);
+ dev = alloc_netdev(sizeof(*priv), "osn%d", NET_NAME_UNKNOWN,
+ ether_setup);
break;
default:
- dev = alloc_etherdev_mqs(0, QETH_MAX_QUEUES, 1);
+ dev = alloc_etherdev_mqs(sizeof(*priv), QETH_MAX_QUEUES, 1);
}
if (!dev)
return NULL;
+ priv = netdev_priv(dev);
+ priv->rx_copybreak = QETH_RX_COPYBREAK;
+
dev->ml_priv = card;
dev->watchdog_timeo = QETH_TX_TIMEOUT;
dev->min_mtu = IS_OSN(card) ? 64 : 576;
diff --git a/drivers/s390/net/qeth_ethtool.c b/drivers/s390/net/qeth_ethtool.c
index ab59bc975719..9052c72d5b8f 100644
--- a/drivers/s390/net/qeth_ethtool.c
+++ b/drivers/s390/net/qeth_ethtool.c
@@ -175,6 +175,35 @@ static void qeth_get_channels(struct net_device *dev,
channels->combined_count = 0;
}
+static int qeth_get_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna, void *data)
+{
+ struct qeth_priv *priv = netdev_priv(dev);
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ *(u32 *)data = priv->rx_copybreak;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int qeth_set_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna,
+ const void *data)
+{
+ struct qeth_priv *priv = netdev_priv(dev);
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ WRITE_ONCE(priv->rx_copybreak, *(u32 *)data);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
/* Helper function to fill 'advertising' and 'supported' which are the same. */
/* Autoneg and full-duplex are supported and advertised unconditionally. */
/* Always advertise and support all speeds up to specified, and only one */
@@ -381,6 +410,8 @@ const struct ethtool_ops qeth_ethtool_ops = {
.get_sset_count = qeth_get_sset_count,
.get_drvinfo = qeth_get_drvinfo,
.get_channels = qeth_get_channels,
+ .get_tunable = qeth_get_tunable,
+ .set_tunable = qeth_set_tunable,
.get_link_ksettings = qeth_get_link_ksettings,
};
--
2.17.1
next prev parent reply other threads:[~2020-02-27 17:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-27 17:08 [PATCH net-next 0/8] s390/qeth: updates 2020-02-27 Julian Wiedmann
2020-02-27 17:08 ` [PATCH net-next 1/8] s390/qeth: remove dead code in qeth_l3_iqd_read_initial_mac() Julian Wiedmann
2020-02-27 17:08 ` [PATCH net-next 2/8] s390/qeth: clean up CREATE_ADDR cmd code Julian Wiedmann
2020-02-27 17:08 ` [PATCH net-next 3/8] s390/qeth: validate device-provided MAC address Julian Wiedmann
2020-02-27 17:08 ` [PATCH net-next 4/8] s390/qeth: remove unused cmd definitions Julian Wiedmann
2020-02-27 17:08 ` [PATCH net-next 5/8] s390/qeth: reset seqnos on connection startup Julian Wiedmann
2020-02-27 17:08 ` [PATCH net-next 6/8] s390/qeth: don't re-start read cmd when IDX has terminated Julian Wiedmann
2020-02-27 17:08 ` [PATCH net-next 7/8] s390/qeth: don't check for IFF_UP when scheduling napi Julian Wiedmann
2020-02-27 17:08 ` Julian Wiedmann [this message]
2020-02-27 19:15 ` [PATCH net-next 0/8] s390/qeth: updates 2020-02-27 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200227170816.101286-9-jwi@linux.ibm.com \
--to=jwi@linux.ibm.com \
--cc=davem@davemloft.net \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=ubraun@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).