Re: [PATCH net-next 1/3] dt-bindings: net: add dt bindings for marvell10g driver

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Thu, Feb 27, 2020 at 11:08:58AM -0600, Rob Herring wrote:
> On Thu, 27 Feb 2020 09:52:36 +0000, Russell King wrote:
> > Add a DT bindings document for the Marvell 10G driver, which will
> > augment the generic ethernet PHY binding by having LED mode
> > configuration.
> > 
> > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> > ---
> >  .../devicetree/bindings/net/marvell,10g.yaml  | 31 +++++++++++++++++++
> >  1 file changed, 31 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/marvell,10g.yaml
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
> Documentation/devicetree/bindings/net/marvell,10g.example.dts:18.13-23: Warning (reg_format): /example-0/ethernet-phy@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
> Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/net/marvell,10g.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

It looks like your bot has made a mistake, or I don't understand the
error messages. It seems to be trying to treat the example as a PCI
device, but it isn't, it is a PHY device.

I don't think that's something I can fix, sorry.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up