From: Julian Wiedmann <jwi@linux.ibm.com>
To: David Miller <davem@davemloft.net>
Cc: netdev <netdev@vger.kernel.org>,
linux-s390 <linux-s390@vger.kernel.org>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
Ursula Braun <ubraun@linux.ibm.com>,
Julian Wiedmann <jwi@linux.ibm.com>
Subject: [PATCH net-next 05/11] s390/qeth: allow configuration of TX queues for IQD devices
Date: Wed, 18 Mar 2020 13:54:49 +0100 [thread overview]
Message-ID: <20200318125455.5838-6-jwi@linux.ibm.com> (raw)
In-Reply-To: <20200318125455.5838-1-jwi@linux.ibm.com>
Similar to the support for z/VM NICs, but we need to take extra care
about the dedicated mcast queue:
1. netdev_pick_tx() is unaware of this limitation and might select the
mcast txq. Catch this.
2. require at least _two_ TX queues - one for ucast, one for mcast.
3. when reducing the number of TX queues, there's a potential race
where netdev_cap_txqueue() over-rules the selected txq index and
falls back to index 0. This would place ucast traffic on the mcast
queue, and result in TX errors.
So for IQD, reject a reduction while the interface is running.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
drivers/s390/net/qeth_core_main.c | 6 +++++-
drivers/s390/net/qeth_ethtool.c | 19 ++++++++++++++++---
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index f13495d9209b..aa493edc0082 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -6644,9 +6644,13 @@ EXPORT_SYMBOL_GPL(qeth_get_stats64);
u16 qeth_iqd_select_queue(struct net_device *dev, struct sk_buff *skb,
u8 cast_type, struct net_device *sb_dev)
{
+ u16 txq;
+
if (cast_type != RTN_UNICAST)
return QETH_IQD_MCAST_TXQ;
- return QETH_IQD_MIN_UCAST_TXQ;
+
+ txq = netdev_pick_tx(dev, skb, sb_dev);
+ return (txq == QETH_IQD_MCAST_TXQ) ? QETH_IQD_MIN_UCAST_TXQ : txq;
}
EXPORT_SYMBOL_GPL(qeth_iqd_select_queue);
diff --git a/drivers/s390/net/qeth_ethtool.c b/drivers/s390/net/qeth_ethtool.c
index 19b9c8302d36..715ee0015847 100644
--- a/drivers/s390/net/qeth_ethtool.c
+++ b/drivers/s390/net/qeth_ethtool.c
@@ -180,14 +180,27 @@ static int qeth_set_channels(struct net_device *dev,
{
struct qeth_card *card = dev->ml_priv;
- if (IS_IQD(card) || !IS_VM_NIC(card))
- return -EOPNOTSUPP;
-
if (channels->rx_count == 0 || channels->tx_count == 0)
return -EINVAL;
if (channels->tx_count > card->qdio.no_out_queues)
return -EINVAL;
+ if (IS_IQD(card)) {
+ if (channels->tx_count < QETH_IQD_MIN_TXQ)
+ return -EINVAL;
+
+ /* Reject downgrade while running. It could push displaced
+ * ucast flows onto txq0, which is reserved for mcast.
+ */
+ if (netif_running(dev) &&
+ channels->tx_count < dev->real_num_tx_queues)
+ return -EPERM;
+ } else {
+ /* OSA still uses the legacy prio-queue mechanism: */
+ if (!IS_VM_NIC(card))
+ return -EOPNOTSUPP;
+ }
+
return netif_set_real_num_tx_queues(dev, channels->tx_count);
}
--
2.17.1
next prev parent reply other threads:[~2020-03-18 12:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-18 12:54 [PATCH net-next 00/11] s390/qeth: updates 2020-03-18 Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 01/11] s390/qeth: use memory reserves to back RX buffers Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 02/11] s390/qeth: use memory reserves in TX slow path Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 03/11] s390/qeth: remove prio-queueing support for z/VM NICs Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 04/11] s390/qeth: allow configuration of TX queues " Julian Wiedmann
2020-03-18 12:54 ` Julian Wiedmann [this message]
2020-03-18 12:54 ` [PATCH net-next 06/11] s390/qeth: balance the TX queue selection for IQD devices Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 07/11] s390/qeth: add SW timestamping support " Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 08/11] s390/qeth: don't report hard-coded driver version Julian Wiedmann
2020-03-18 13:07 ` Leon Romanovsky
2020-03-18 12:54 ` [PATCH net-next 09/11] s390/qeth: add phys_to_virt() translation for AOB Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 10/11] s390/qeth: remove gratuitous NULL checks Julian Wiedmann
2020-03-18 12:54 ` [PATCH net-next 11/11] s390/qeth: use dev->reg_state Julian Wiedmann
2020-03-18 23:34 ` [PATCH net-next 00/11] s390/qeth: updates 2020-03-18 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200318125455.5838-6-jwi@linux.ibm.com \
--to=jwi@linux.ibm.com \
--cc=davem@davemloft.net \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=ubraun@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).