Netdev List
 help / color / mirror / Atom feed
From: Jakub Kicinski <kuba@kernel.org>
To: Rohit Maheshwari <rohitm@chelsio.com>
Cc: davem@davemloft.net, netdev@vger.kernel.org, borisp@mellanox.com,
	secdev@chelsio.com
Subject: Re: [PATCH net-next] cxgb4/chcr: nic-tls stats in ethtool
Date: Sun, 22 Mar 2020 13:57:25 -0700	[thread overview]
Message-ID: <20200322135725.6cdc37a8@kicinski-fedora-PC1C0HJN> (raw)
In-Reply-To: <20200321112336.8771-1-rohitm@chelsio.com>

On Sat, 21 Mar 2020 16:53:36 +0530 Rohit Maheshwari wrote:
> Included nic tls statistics in ethtool stats.
> 
> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
> ---
>  .../ethernet/chelsio/cxgb4/cxgb4_ethtool.c    | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> index 398ade42476c..4998f1d1e218 100644
> --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> @@ -134,6 +134,28 @@ static char loopback_stats_strings[][ETH_GSTRING_LEN] = {
>  	"bg3_frames_trunc       ",
>  };
>  
> +#ifdef CONFIG_CHELSIO_TLS_DEVICE
> +struct chcr_tls_stats {
> +	u64 tx_tls_encrypted_packets;
> +	u64 tx_tls_encrypted_bytes;
> +	u64 tx_tls_ctx;
> +	u64 tx_tls_ooo;
> +	u64 tx_tls_skip_no_sync_data;
> +	u64 tx_tls_drop_no_sync_data;
> +	u64 tx_tls_drop_bypass_req;

I don't understand why you need to have a structure for this, and then
you memset it to 0, unnecessarily, but I guess that's just a matter of
taste.

> +};
> +
> +static char chcr_tls_stats_strings[][ETH_GSTRING_LEN] = {
> +	"tx_tls_encrypted_pkts  ",
> +	"tx_tls_encrypted_bytes ",
> +	"tx_tls_ctx             ",
> +	"tx_tls_ooo             ",
> +	"tx_tls_skip_nosync_data",
> +	"tx_tls_drop_nosync_data",
> +	"tx_tls_drop_bypass_req ",

These, however, are not correct - please remove the spaces at the end,
otherwise your names are different than for other vendors. And there is
an underscore in the middle of "no_sync".

When you're told to adhere to API recommendation, please adhere to it
exactly.

> +};
> +#endif
> +
>  static const char cxgb4_priv_flags_strings[][ETH_GSTRING_LEN] = {
>  	[PRIV_FLAG_PORT_TX_VM_BIT] = "port_tx_vm_wr",
>  };
> @@ -144,6 +166,9 @@ static int get_sset_count(struct net_device *dev, int sset)
>  	case ETH_SS_STATS:
>  		return ARRAY_SIZE(stats_strings) +
>  		       ARRAY_SIZE(adapter_stats_strings) +
> +#ifdef CONFIG_CHELSIO_TLS_DEVICE
> +		       ARRAY_SIZE(chcr_tls_stats_strings) +
> +#endif
>  		       ARRAY_SIZE(loopback_stats_strings);
>  	case ETH_SS_PRIV_FLAGS:
>  		return ARRAY_SIZE(cxgb4_priv_flags_strings);
> @@ -204,6 +229,11 @@ static void get_strings(struct net_device *dev, u32 stringset, u8 *data)
>  		memcpy(data, adapter_stats_strings,
>  		       sizeof(adapter_stats_strings));
>  		data += sizeof(adapter_stats_strings);
> +#ifdef CONFIG_CHELSIO_TLS_DEVICE
> +		memcpy(data, chcr_tls_stats_strings,
> +		       sizeof(chcr_tls_stats_strings));
> +		data += sizeof(chcr_tls_stats_strings);
> +#endif
>  		memcpy(data, loopback_stats_strings,
>  		       sizeof(loopback_stats_strings));
>  	} else if (stringset == ETH_SS_PRIV_FLAGS) {
> @@ -289,6 +319,29 @@ static void collect_adapter_stats(struct adapter *adap, struct adapter_stats *s)
>  	}
>  }
>  
> +#ifdef CONFIG_CHELSIO_TLS_DEVICE
> +static void collect_chcr_tls_stats(struct adapter *adap,
> +				   struct chcr_tls_stats *s)
> +{
> +	struct chcr_stats_debug *stats = &adap->chcr_stats;
> +
> +	memset(s, 0, sizeof(*s));
> +
> +	s->tx_tls_encrypted_packets =
> +		atomic64_read(&stats->ktls_tx_encrypted_packets);
> +	s->tx_tls_encrypted_bytes =
> +		atomic64_read(&stats->ktls_tx_encrypted_bytes);
> +	s->tx_tls_ctx = atomic64_read(&stats->ktls_tx_ctx);
> +	s->tx_tls_ooo = atomic64_read(&stats->ktls_tx_ooo);
> +	s->tx_tls_skip_no_sync_data =
> +		atomic64_read(&stats->ktls_tx_skip_no_sync_data);
> +	s->tx_tls_drop_no_sync_data =
> +		atomic64_read(&stats->ktls_tx_drop_no_sync_data);
> +	s->tx_tls_drop_bypass_req =
> +		atomic64_read(&stats->ktls_tx_drop_bypass_req);
> +}
> +#endif
> +
>  static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
>  		      u64 *data)
>  {
> @@ -307,6 +360,10 @@ static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
>  	data += sizeof(struct queue_port_stats) / sizeof(u64);
>  	collect_adapter_stats(adapter, (struct adapter_stats *)data);
>  	data += sizeof(struct adapter_stats) / sizeof(u64);
> +#ifdef CONFIG_CHELSIO_TLS_DEVICE
> +	collect_chcr_tls_stats(adapter, (struct chcr_tls_stats *)data);
> +	data += sizeof(struct chcr_tls_stats) / sizeof(u64);
> +#endif
>  
>  	*data++ = (u64)pi->port_id;
>  	memset(&s, 0, sizeof(s));


  reply	other threads:[~2020-03-22 20:57 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-21 11:23 [PATCH net-next] cxgb4/chcr: nic-tls stats in ethtool Rohit Maheshwari
2020-03-22 20:57 ` Jakub Kicinski [this message]
2020-03-31 14:26   ` rohit maheshwari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200322135725.6cdc37a8@kicinski-fedora-PC1C0HJN \
    --to=kuba@kernel.org \
    --cc=borisp@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=rohitm@chelsio.com \
    --cc=secdev@chelsio.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox