Re: [RFC net-next 0/2] split phylink PCS operations and add PCS support for dpaa2

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

Hi,

Was there any conclusion on this 5 patch series, and whether I should
submit it for net-next?

The discussion around patch 2 seems to have tailed off, and no one
seems to have replied to patches 3 to 5.

Thanks.

On Tue, Mar 17, 2020 at 02:49:44PM +0000, Russell King - ARM Linux admin wrote:
> This series splits the phylink_mac_ops structure so that PCS can be
> supported separately with their own PCS operations, and illustrates
> the use of the helpers in the previous patch series (net: add phylink
> support for PCS) in the DPAA2 driver.
> 
> This is prototype code, not intended to be merged yet, and is merely
> being sent for illustrative purposes only.
> 
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi   | 144 +++++++++++++++
>  drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 226 ++++++++++++++++++++++-
>  drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h |   1 +
>  drivers/net/phy/phylink.c                        | 102 ++++++----
>  include/linux/phylink.h                          |  11 ++
>  5 files changed, 446 insertions(+), 38 deletions(-)
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up