From: Vladimir Oltean <olteanv@gmail.com>
To: andrew@lunn.ch, f.fainelli@gmail.com, vivien.didelot@gmail.com,
davem@davemloft.net, jakub.kicinski@netronome.com
Cc: murali.policharla@broadcom.com, stephen@networkplumber.org,
jiri@resnulli.us, idosch@idosch.org, kuba@kernel.org,
nikolay@cumulusnetworks.com, netdev@vger.kernel.org
Subject: [PATCH v3 net-next 0/8] Configure the MTU on DSA switches
Date: Fri, 27 Mar 2020 00:40:32 +0200 [thread overview]
Message-ID: <20200326224040.32014-1-olteanv@gmail.com> (raw)
From: Vladimir Oltean <vladimir.oltean@nxp.com>
This series adds support for configuring the MTU on front-panel switch
ports, while seamlessly adapting the CPU port and the DSA master to the
largest value plus the tagger overhead.
It also implements bridge MTU auto-normalization within the DSA core, as
resulted after the feedback of the implementation of this feature inside
the bridge driver in v2.
Support was added for quite a number of switches, in the hope that this
series would gain some traction:
- sja1105
- felix
- vsc73xx
- b53 and rest of the platform
V2 of this series was submitted here:
https://patchwork.ozlabs.org/cover/1261471/
V1 of this series was submitted here:
https://patchwork.ozlabs.org/cover/1199868/
Murali Krishna Policharla (3):
net: phy: bcm7xx: add jumbo frame configuration to PHY
bgmac: configure MTU and add support for frames beyond 8192 byte size
net: dsa: b53: add MTU configuration support
Vladimir Oltean (5):
net: dsa: configure the MTU for switch ports
net: dsa: implement auto-normalization of MTU for bridge hardware
datapath
net: dsa: sja1105: implement the port MTU callbacks
net: dsa: vsc73xx: make the MTU configurable
net: dsa: felix: support changing the MTU
drivers/net/dsa/b53/b53_common.c | 27 ++-
drivers/net/dsa/ocelot/felix.c | 19 +++
drivers/net/dsa/sja1105/sja1105.h | 1 +
drivers/net/dsa/sja1105/sja1105_main.c | 50 +++++-
drivers/net/dsa/vitesse-vsc73xx-core.c | 30 ++--
drivers/net/ethernet/broadcom/bgmac.c | 12 ++
drivers/net/ethernet/broadcom/bgmac.h | 5 +-
drivers/net/ethernet/mscc/ocelot.c | 45 +++--
drivers/net/phy/bcm-phy-lib.c | 22 +++
drivers/net/phy/bcm-phy-lib.h | 1 +
drivers/net/phy/bcm7xxx.c | 4 +
include/linux/brcmphy.h | 2 +
include/net/dsa.h | 16 ++
include/soc/mscc/ocelot.h | 7 +
net/dsa/dsa2.c | 2 +-
net/dsa/dsa_priv.h | 15 ++
net/dsa/master.c | 23 +--
net/dsa/port.c | 13 ++
net/dsa/slave.c | 219 ++++++++++++++++++++++++-
net/dsa/switch.c | 37 +++++
20 files changed, 502 insertions(+), 48 deletions(-)
--
2.17.1
next reply other threads:[~2020-03-26 22:41 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-26 22:40 Vladimir Oltean [this message]
2020-03-26 22:40 ` [PATCH v3 net-next 1/8] net: phy: bcm7xx: add jumbo frame configuration to PHY Vladimir Oltean
2020-03-26 23:17 ` Florian Fainelli
2020-03-26 22:40 ` [PATCH v3 net-next 2/8] bgmac: configure MTU and add support for frames beyond 8192 byte size Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 3/8] net: dsa: configure the MTU for switch ports Vladimir Oltean
2020-03-27 0:06 ` Andrew Lunn
2020-03-27 10:00 ` Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 4/8] net: dsa: implement auto-normalization of MTU for bridge hardware datapath Vladimir Oltean
2020-04-02 1:25 ` kbuild test robot
2020-03-26 22:40 ` [PATCH v3 net-next 5/8] net: dsa: b53: add MTU configuration support Vladimir Oltean
2020-03-26 23:16 ` Florian Fainelli
2020-03-27 13:01 ` Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 6/8] net: dsa: sja1105: implement the port MTU callbacks Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 7/8] net: dsa: vsc73xx: make the MTU configurable Vladimir Oltean
2020-03-26 22:40 ` [PATCH v3 net-next 8/8] net: dsa: felix: support changing the MTU Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200326224040.32014-1-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=idosch@idosch.org \
--cc=jakub.kicinski@netronome.com \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=murali.policharla@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=nikolay@cumulusnetworks.com \
--cc=stephen@networkplumber.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).