From: Marek Vasut <marex@denx.de>
To: netdev@vger.kernel.org
Cc: Marek Vasut <marex@denx.de>,
"David S . Miller" <davem@davemloft.net>,
Lukas Wunner <lukas@wunner.de>, Petr Stetiar <ynezz@true.cz>,
YueHaibing <yuehaibing@huawei.com>
Subject: [PATCH V3 12/18] net: ks8851: Split out SPI specific entries in struct ks8851_net
Date: Sat, 28 Mar 2020 01:31:42 +0100 [thread overview]
Message-ID: <20200328003148.498021-13-marex@denx.de> (raw)
In-Reply-To: <20200328003148.498021-1-marex@denx.de>
Add a new struct ks8851_net_spi, which embeds the original
struct ks8851_net and contains the entries specific only to
the SPI variant of KS8851.
There should be no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
---
V2: - Drop 'must be first' comment on the embedded struct ks8851_net
- Remove moved kerneldoc entries for struct ks8851_net
V3: - Split out also tx_work and lock
---
drivers/net/ethernet/micrel/ks8851.c | 128 +++++++++++++++++----------
1 file changed, 79 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index fe09795265b9..1487ca135658 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -64,16 +64,11 @@ union ks8851_tx_hdr {
/**
* struct ks8851_net - KS8851 driver private data
* @netdev: The network device we're bound to
- * @spidev: The spi device we're bound to.
- * @lock: Lock to ensure that the device is not accessed when busy.
* @statelock: Lock on this structure for tx list.
* @mii: The MII state information for the mii calls.
* @rxctrl: RX settings for @rxctrl_work.
- * @tx_work: Work queue for tx packets
* @rxctrl_work: Work queue for updating RX mode and multicast lists
* @txq: Queue of packets for transmission.
- * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
- * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
* @txh: Space for generating packet TX header in DMA-able data
* @rxd: Space for receiving SPI data, in DMA-able space.
* @txd: Space for transmitting SPI data, in DMA-able space.
@@ -87,11 +82,6 @@ union ks8851_tx_hdr {
* @vdd_io: Optional digital power supply for IO
* @gpio: Optional reset_n gpio
*
- * The @lock ensures that the chip is protected when certain operations are
- * in progress. When the read or write packet transfer is in progress, most
- * of the chip registers are not ccessible until the transfer is finished and
- * the DMA has been de-asserted.
- *
* The @statelock is used to protect information in the structure which may
* need to be accessed via several sources, such as the network driver layer
* or one of the work queues.
@@ -102,8 +92,6 @@ union ks8851_tx_hdr {
*/
struct ks8851_net {
struct net_device *netdev;
- struct spi_device *spidev;
- struct mutex lock;
spinlock_t statelock;
union ks8851_tx_hdr txh ____cacheline_aligned;
@@ -121,22 +109,43 @@ struct ks8851_net {
struct mii_if_info mii;
struct ks8851_rxctrl rxctrl;
- struct work_struct tx_work;
struct work_struct rxctrl_work;
struct sk_buff_head txq;
- struct spi_message spi_msg1;
- struct spi_message spi_msg2;
- struct spi_transfer spi_xfer1;
- struct spi_transfer spi_xfer2[2];
-
struct eeprom_93cx6 eeprom;
struct regulator *vdd_reg;
struct regulator *vdd_io;
int gpio;
};
+/**
+ * struct ks8851_net_spi - KS8851 SPI driver private data
+ * @ks8851: KS8851 driver common private data
+ * @lock: Lock to ensure that the device is not accessed when busy.
+ * @tx_work: Work queue for tx packets
+ * @spidev: The spi device we're bound to.
+ * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
+ * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not ccessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ */
+struct ks8851_net_spi {
+ struct ks8851_net ks8851;
+ struct mutex lock;
+ struct work_struct tx_work;
+ struct spi_device *spidev;
+ struct spi_message spi_msg1;
+ struct spi_message spi_msg2;
+ struct spi_transfer spi_xfer1;
+ struct spi_transfer spi_xfer2[2];
+};
+
+#define to_ks8851_spi(ks) container_of((ks), struct ks8851_net_spi, ks8851)
+
static int msg_enable;
/* SPI frame opcodes */
@@ -160,7 +169,9 @@ static int msg_enable;
*/
static void ks8851_lock(struct ks8851_net *ks, unsigned long *flags)
{
- mutex_lock(&ks->lock);
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+
+ mutex_lock(&kss->lock);
}
/**
@@ -172,7 +183,9 @@ static void ks8851_lock(struct ks8851_net *ks, unsigned long *flags)
*/
static void ks8851_unlock(struct ks8851_net *ks, unsigned long *flags)
{
- mutex_unlock(&ks->lock);
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+
+ mutex_unlock(&kss->lock);
}
/* SPI register read/write calls.
@@ -192,8 +205,9 @@ static void ks8851_unlock(struct ks8851_net *ks, unsigned long *flags)
*/
static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
{
- struct spi_transfer *xfer = &ks->spi_xfer1;
- struct spi_message *msg = &ks->spi_msg1;
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+ struct spi_transfer *xfer = &kss->spi_xfer1;
+ struct spi_message *msg = &kss->spi_msg1;
__le16 txb[2];
int ret;
@@ -204,7 +218,7 @@ static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
xfer->rx_buf = NULL;
xfer->len = 4;
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "spi_sync() failed\n");
}
@@ -222,6 +236,7 @@ static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
u8 *rxb, unsigned rxl)
{
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
struct spi_transfer *xfer;
struct spi_message *msg;
__le16 *txb = (__le16 *)ks->txd;
@@ -230,9 +245,9 @@ static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
txb[0] = cpu_to_le16(op | KS_SPIOP_RD);
- if (ks->spidev->master->flags & SPI_MASTER_HALF_DUPLEX) {
- msg = &ks->spi_msg2;
- xfer = ks->spi_xfer2;
+ if (kss->spidev->master->flags & SPI_MASTER_HALF_DUPLEX) {
+ msg = &kss->spi_msg2;
+ xfer = kss->spi_xfer2;
xfer->tx_buf = txb;
xfer->rx_buf = NULL;
@@ -243,18 +258,18 @@ static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
xfer->rx_buf = trx;
xfer->len = rxl;
} else {
- msg = &ks->spi_msg1;
- xfer = &ks->spi_xfer1;
+ msg = &kss->spi_msg1;
+ xfer = &kss->spi_xfer1;
xfer->tx_buf = txb;
xfer->rx_buf = trx;
xfer->len = rxl + 2;
}
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "read: spi_sync() failed\n");
- else if (ks->spidev->master->flags & SPI_MASTER_HALF_DUPLEX)
+ else if (kss->spidev->master->flags & SPI_MASTER_HALF_DUPLEX)
memcpy(rxb, trx, rxl);
else
memcpy(rxb, trx + 2, rxl);
@@ -424,8 +439,9 @@ static void ks8851_init_mac(struct ks8851_net *ks, struct device_node *np)
*/
static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
{
- struct spi_transfer *xfer = ks->spi_xfer2;
- struct spi_message *msg = &ks->spi_msg2;
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+ struct spi_transfer *xfer = kss->spi_xfer2;
+ struct spi_message *msg = &kss->spi_msg2;
u8 txb[1];
int ret;
@@ -444,7 +460,7 @@ static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
xfer->tx_buf = NULL;
xfer->len = len;
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "%s: spi_sync() failed\n", __func__);
}
@@ -678,8 +694,9 @@ static inline unsigned calc_txlen(unsigned len)
*/
static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq)
{
- struct spi_transfer *xfer = ks->spi_xfer2;
- struct spi_message *msg = &ks->spi_msg2;
+ struct ks8851_net_spi *kss = to_ks8851_spi(ks);
+ struct spi_transfer *xfer = kss->spi_xfer2;
+ struct spi_message *msg = &kss->spi_msg2;
unsigned fid = 0;
int ret;
@@ -706,7 +723,7 @@ static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq)
xfer->rx_buf = NULL;
xfer->len = ALIGN(txp->len, 4);
- ret = spi_sync(ks->spidev, msg);
+ ret = spi_sync(kss->spidev, msg);
if (ret < 0)
netdev_err(ks->netdev, "%s: spi_sync() failed\n", __func__);
}
@@ -735,10 +752,15 @@ static void ks8851_done_tx(struct ks8851_net *ks, struct sk_buff *txb)
*/
static void ks8851_tx_work(struct work_struct *work)
{
- struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work);
+ struct ks8851_net_spi *kss;
+ struct ks8851_net *ks;
unsigned long flags;
struct sk_buff *txb;
- bool last = skb_queue_empty(&ks->txq);
+ bool last;
+
+ kss = container_of(work, struct ks8851_net_spi, tx_work);
+ ks = &kss->ks8851;
+ last = skb_queue_empty(&ks->txq);
ks8851_lock(ks, &flags);
@@ -858,8 +880,11 @@ static int ks8851_net_open(struct net_device *dev)
static int ks8851_net_stop(struct net_device *dev)
{
struct ks8851_net *ks = netdev_priv(dev);
+ struct ks8851_net_spi *kss;
unsigned long flags;
+ kss = to_ks8851_spi(ks);
+
netif_info(ks, ifdown, dev, "shutting down\n");
netif_stop_queue(dev);
@@ -871,7 +896,7 @@ static int ks8851_net_stop(struct net_device *dev)
ks8851_unlock(ks, &flags);
/* stop any outstanding work */
- flush_work(&ks->tx_work);
+ flush_work(&kss->tx_work);
flush_work(&ks->rxctrl_work);
ks8851_lock(ks, &flags);
@@ -919,6 +944,9 @@ static netdev_tx_t ks8851_start_xmit(struct sk_buff *skb,
struct ks8851_net *ks = netdev_priv(dev);
unsigned needed = calc_txlen(skb->len);
netdev_tx_t ret = NETDEV_TX_OK;
+ struct ks8851_net_spi *kss;
+
+ kss = to_ks8851_spi(ks);
netif_dbg(ks, tx_queued, ks->netdev,
"%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data);
@@ -934,7 +962,7 @@ static netdev_tx_t ks8851_start_xmit(struct sk_buff *skb,
}
spin_unlock(&ks->statelock);
- schedule_work(&ks->tx_work);
+ schedule_work(&kss->tx_work);
return ret;
}
@@ -1406,22 +1434,24 @@ static SIMPLE_DEV_PM_OPS(ks8851_pm_ops, ks8851_suspend, ks8851_resume);
static int ks8851_probe(struct spi_device *spi)
{
struct device *dev = &spi->dev;
+ struct ks8851_net_spi *kss;
struct net_device *netdev;
struct ks8851_net *ks;
int ret;
unsigned cider;
int gpio;
- netdev = devm_alloc_etherdev(dev, sizeof(struct ks8851_net));
+ netdev = devm_alloc_etherdev(dev, sizeof(struct ks8851_net_spi));
if (!netdev)
return -ENOMEM;
spi->bits_per_word = 8;
ks = netdev_priv(netdev);
+ kss = to_ks8851_spi(ks);
ks->netdev = netdev;
- ks->spidev = spi;
+ kss->spidev = spi;
ks->tx_space = 6144;
gpio = of_get_named_gpio_flags(dev->of_node, "reset-gpios", 0, NULL);
@@ -1467,20 +1497,20 @@ static int ks8851_probe(struct spi_device *spi)
gpio_set_value(gpio, 1);
}
- mutex_init(&ks->lock);
+ mutex_init(&kss->lock);
spin_lock_init(&ks->statelock);
- INIT_WORK(&ks->tx_work, ks8851_tx_work);
+ INIT_WORK(&kss->tx_work, ks8851_tx_work);
INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work);
/* initialise pre-made spi transfer messages */
- spi_message_init(&ks->spi_msg1);
- spi_message_add_tail(&ks->spi_xfer1, &ks->spi_msg1);
+ spi_message_init(&kss->spi_msg1);
+ spi_message_add_tail(&kss->spi_xfer1, &kss->spi_msg1);
- spi_message_init(&ks->spi_msg2);
- spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2);
- spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2);
+ spi_message_init(&kss->spi_msg2);
+ spi_message_add_tail(&kss->spi_xfer2[0], &kss->spi_msg2);
+ spi_message_add_tail(&kss->spi_xfer2[1], &kss->spi_msg2);
/* setup EEPROM state */
--
2.25.1
next prev parent reply other threads:[~2020-03-28 0:32 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-28 0:31 [PATCH V3 00/18] net: ks8851: Unify KS8851 SPI and MLL drivers Marek Vasut
2020-03-28 0:31 ` [PATCH V3 01/18] net: ks8851: Factor out spi->dev in probe()/remove() Marek Vasut
2020-03-28 0:31 ` [PATCH V3 02/18] net: ks8851: Rename ndev to netdev in probe Marek Vasut
2020-03-28 0:31 ` [PATCH V3 03/18] net: ks8851: Replace dev_err() with netdev_err() in IRQ handler Marek Vasut
2020-03-28 0:31 ` [PATCH V3 04/18] net: ks8851: Pass device node into ks8851_init_mac() Marek Vasut
2020-03-28 0:31 ` [PATCH V3 05/18] net: ks8851: Use devm_alloc_etherdev() Marek Vasut
2020-03-28 0:31 ` [PATCH V3 06/18] net: ks8851: Use dev_{get,set}_drvdata() Marek Vasut
2020-03-28 0:31 ` [PATCH V3 07/18] net: ks8851: Remove ks8851_rdreg32() Marek Vasut
2020-03-28 0:31 ` [PATCH V3 08/18] net: ks8851: Use 16-bit writes to program MAC address Marek Vasut
2020-03-28 0:31 ` [PATCH V3 09/18] net: ks8851: Use 16-bit read of RXFC register Marek Vasut
2020-03-28 0:31 ` [PATCH V3 10/18] net: ks8851: Factor out bus lock handling Marek Vasut
2020-03-28 0:31 ` [PATCH V3 11/18] net: ks8851: Factor out SKB receive function Marek Vasut
2020-03-28 0:31 ` Marek Vasut [this message]
2020-03-28 0:31 ` [PATCH V3 13/18] net: ks8851: Split out SPI specific code from probe() and remove() Marek Vasut
2020-03-28 0:31 ` [PATCH V3 14/18] net: ks8851: Factor out TX work flush function Marek Vasut
2020-03-28 0:31 ` [PATCH V3 15/18] net: ks8851: Permit overridding interrupt enable register Marek Vasut
2020-03-28 0:31 ` [PATCH V3 16/18] net: ks8851: Separate SPI operations into separate file Marek Vasut
2020-03-28 2:45 ` kbuild test robot
2020-03-28 4:11 ` kbuild test robot
2020-03-28 0:31 ` [PATCH V3 17/18] net: ks8851: Implement Parallel bus operations Marek Vasut
2020-03-28 0:31 ` [PATCH V3 18/18] net: ks8851: Remove ks8851_mll.c Marek Vasut
2020-03-29 16:15 ` [PATCH V3 00/18] net: ks8851: Unify KS8851 SPI and MLL drivers Marek Vasut
2020-04-06 3:16 ` Lukas Wunner
2020-04-06 11:20 ` Marek Vasut
2020-04-08 19:49 ` Marek Vasut
2020-04-10 11:01 ` Lukas Wunner
2020-04-10 18:10 ` Marek Vasut
2020-04-14 18:20 ` [PATCH V4 00/19] " Marek Vasut
2020-04-14 18:20 ` [PATCH V4 01/19] net: ks8851: Factor out spi->dev in probe()/remove() Marek Vasut
2020-04-14 18:20 ` [PATCH V4 02/19] net: ks8851: Rename ndev to netdev in probe Marek Vasut
2020-04-14 18:20 ` [PATCH V4 03/19] net: ks8851: Replace dev_err() with netdev_err() in IRQ handler Marek Vasut
2020-04-14 18:20 ` [PATCH V4 04/19] net: ks8851: Pass device node into ks8851_init_mac() Marek Vasut
2020-04-14 18:20 ` [PATCH V4 05/19] net: ks8851: Use devm_alloc_etherdev() Marek Vasut
2020-04-14 18:20 ` [PATCH V4 06/19] net: ks8851: Use dev_{get,set}_drvdata() Marek Vasut
2020-04-14 18:20 ` [PATCH V4 07/19] net: ks8851: Remove ks8851_rdreg32() Marek Vasut
2020-04-20 14:07 ` Lukas Wunner
2020-04-20 14:12 ` Marek Vasut
2020-04-20 14:20 ` Lukas Wunner
2020-04-20 14:24 ` Marek Vasut
2020-04-20 14:44 ` Lukas Wunner
2020-04-20 15:38 ` Marek Vasut
2020-04-20 15:50 ` Andrew Lunn
2020-05-07 14:22 ` Marek Vasut
2020-04-14 18:20 ` [PATCH V4 08/19] net: ks8851: Use 16-bit writes to program MAC address Marek Vasut
2020-04-14 18:20 ` [PATCH V4 09/19] net: ks8851: Use 16-bit read of RXFC register Marek Vasut
2020-04-14 18:20 ` [PATCH V4 10/19] net: ks8851: Factor out bus lock handling Marek Vasut
2020-04-14 18:20 ` [PATCH V4 11/19] net: ks8851: Factor out SKB receive function Marek Vasut
2020-04-14 18:20 ` [PATCH V4 12/19] net: ks8851: Split out SPI specific entries in struct ks8851_net Marek Vasut
2020-04-14 18:20 ` [PATCH V4 13/19] net: ks8851: Split out SPI specific code from probe() and remove() Marek Vasut
2020-04-14 18:20 ` [PATCH V4 14/19] net: ks8851: Factor out TX work flush function Marek Vasut
2020-04-14 18:20 ` [PATCH V4 15/19] net: ks8851: Permit overridding interrupt enable register Marek Vasut
2020-04-14 18:20 ` [PATCH V4 16/19] net: ks8851: Implement register, FIFO, lock accessor callbacks Marek Vasut
2020-04-14 18:20 ` [PATCH V4 17/19] net: ks8851: Separate SPI operations into separate file Marek Vasut
2020-04-15 14:56 ` Lukas Wunner
2020-04-16 9:58 ` Marek Vasut
2020-04-14 18:20 ` [PATCH V4 18/19] net: ks8851: Implement Parallel bus operations Marek Vasut
2020-04-14 18:20 ` [PATCH V4 19/19] net: ks8851: Remove ks8851_mll.c Marek Vasut
2020-04-14 20:13 ` [PATCH V4 00/19] net: ks8851: Unify KS8851 SPI and MLL drivers David Miller
2020-04-15 14:39 ` Lukas Wunner
2020-04-15 14:51 ` Marek Vasut
2020-04-15 15:12 ` Lukas Wunner
2020-04-16 10:18 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200328003148.498021-13-marex@denx.de \
--to=marex@denx.de \
--cc=davem@davemloft.net \
--cc=lukas@wunner.de \
--cc=netdev@vger.kernel.org \
--cc=ynezz@true.cz \
--cc=yuehaibing@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).