* [PATCH] mptcp: move pr_fmt defining to protocol.h
@ 2020-04-03 7:57 Geliang Tang
2020-04-03 9:14 ` [PATCH v2] mptcp: add some missing pr_fmt defines Geliang Tang
2020-04-03 10:29 ` [PATCH] mptcp: move pr_fmt defining to protocol.h Matthieu Baerts
0 siblings, 2 replies; 7+ messages in thread
From: Geliang Tang @ 2020-04-03 7:57 UTC (permalink / raw)
To: Mat Martineau, Matthieu Baerts, David S. Miller, Jakub Kicinski
Cc: Geliang Tang, netdev, mptcp, linux-kernel
Some of the mptcp logs didn't print out the format string "MPTCP":
[ 129.185774] DSS
[ 129.185774] data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
[ 129.185774] data_ack=5481534886531492085
[ 129.185775] data_seq=15725204003114694615 subflow_seq=1425409 data_len=5216
[ 129.185776] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
[ 129.185776] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=0 skb=0000000088f05424
[ 129.185777] MPTCP: seq=15725204003114694615 is64=1 ssn=1425409 data_len=5216 data_fin=0
[ 129.185777] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 status=0
[ 129.185778] MPTCP: msk ack_seq=da3b25b9a233c2c7 subflow ack_seq=da3b25b9a233c2c7
[ 129.185778] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=1 skb=000000000caed2cc
[ 129.185779] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
So this patch moves the pr_fmt defining from protocol.c to protocol.h, which
is included by all the C files. Then we can get the same format string
"MPTCP" in all mptcp logs like this:
[ 141.854787] MPTCP: DSS
[ 141.854788] MPTCP: data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
[ 141.854788] MPTCP: data_ack=18028325517710311871
[ 141.854788] MPTCP: data_seq=6163976859259356786 subflow_seq=3309569 data_len=8192
[ 141.854789] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=0 skb=00000000dd95efc3
[ 141.854789] MPTCP: seq=6163976859259356786 is64=1 ssn=3309569 data_len=8192 data_fin=0
[ 141.854790] MPTCP: msk=000000005847a66a ssk=0000000022469903 status=0
[ 141.854790] MPTCP: msk ack_seq=558ad84b9be1d162 subflow ack_seq=558ad84b9be1d162
[ 141.854791] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=1 skb=000000000b8926f6
[ 141.854791] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:0 remaining=28
[ 141.854792] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:dcdf2f3b remaining=28
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
---
net/mptcp/protocol.c | 2 --
net/mptcp/protocol.h | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index 72f3176dc924..cc86137cd04f 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -4,8 +4,6 @@
* Copyright (c) 2017 - 2019, Intel Corporation.
*/
-#define pr_fmt(fmt) "MPTCP: " fmt
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 67448002a2d7..3eff041eeccf 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -7,6 +7,8 @@
#ifndef __MPTCP_PROTOCOL_H
#define __MPTCP_PROTOCOL_H
+#define pr_fmt(fmt) "MPTCP: " fmt
+
#include <linux/random.h>
#include <net/tcp.h>
#include <net/inet_connection_sock.h>
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2] mptcp: add some missing pr_fmt defines
2020-04-03 7:57 [PATCH] mptcp: move pr_fmt defining to protocol.h Geliang Tang
@ 2020-04-03 9:14 ` Geliang Tang
2020-04-03 11:57 ` Matthieu Baerts
2020-04-03 23:06 ` David Miller
2020-04-03 10:29 ` [PATCH] mptcp: move pr_fmt defining to protocol.h Matthieu Baerts
1 sibling, 2 replies; 7+ messages in thread
From: Geliang Tang @ 2020-04-03 9:14 UTC (permalink / raw)
To: Mat Martineau, Matthieu Baerts, David S. Miller, Jakub Kicinski
Cc: Geliang Tang, netdev, mptcp, linux-kernel
Some of the mptcp logs didn't print out the format string:
[ 185.651493] DSS
[ 185.651494] data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 185.651494] data_ack=13792750332298763796
[ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=0 skb=0000000063dc595d
[ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 status=0
[ 185.651495] MPTCP: msk ack_seq=9bbc894565aa2f9a subflow ack_seq=9bbc894565aa2f9a
[ 185.651496] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=1 skb=0000000012e809e1
So this patch added these missing pr_fmt defines. Then we can get the same
format string "MPTCP" in all mptcp logs like this:
[ 142.795829] MPTCP: DSS
[ 142.795829] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 142.795829] MPTCP: data_ack=8089704603109242421
[ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=0 skb=00000000d5f230df
[ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 status=0
[ 142.795831] MPTCP: msk ack_seq=66790290f1199d9b subflow ack_seq=66790290f1199d9b
[ 142.795831] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=1 skb=00000000de5aca2e
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
---
Changes in v2:
- add pr_fmt to C files, not headers.
---
net/mptcp/options.c | 2 ++
net/mptcp/pm.c | 2 ++
net/mptcp/pm_netlink.c | 2 ++
3 files changed, 6 insertions(+)
diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index bd220ee4aac9..faf57585b892 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -4,6 +4,8 @@
* Copyright (c) 2017 - 2019, Intel Corporation.
*/
+#define pr_fmt(fmt) "MPTCP: " fmt
+
#include <linux/kernel.h>
#include <net/tcp.h>
#include <net/mptcp.h>
diff --git a/net/mptcp/pm.c b/net/mptcp/pm.c
index 064639f72487..977d9c8b1453 100644
--- a/net/mptcp/pm.c
+++ b/net/mptcp/pm.c
@@ -3,6 +3,8 @@
*
* Copyright (c) 2019, Intel Corporation.
*/
+#define pr_fmt(fmt) "MPTCP: " fmt
+
#include <linux/kernel.h>
#include <net/tcp.h>
#include <net/mptcp.h>
diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c
index a0ce7f324499..86d61ab34c7c 100644
--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -4,6 +4,8 @@
* Copyright (c) 2020, Red Hat, Inc.
*/
+#define pr_fmt(fmt) "MPTCP: " fmt
+
#include <linux/inet.h>
#include <linux/kernel.h>
#include <net/tcp.h>
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] mptcp: add some missing pr_fmt defines
2020-04-03 9:14 ` [PATCH v2] mptcp: add some missing pr_fmt defines Geliang Tang
@ 2020-04-03 11:57 ` Matthieu Baerts
2020-04-03 23:06 ` David Miller
1 sibling, 0 replies; 7+ messages in thread
From: Matthieu Baerts @ 2020-04-03 11:57 UTC (permalink / raw)
To: Geliang Tang, Mat Martineau, David S. Miller, Jakub Kicinski
Cc: netdev, mptcp, linux-kernel
Hi Geliang,
On 03/04/2020 11:14, Geliang Tang wrote:
> Some of the mptcp logs didn't print out the format string:
>
> [ 185.651493] DSS
> [ 185.651494] data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
> [ 185.651494] data_ack=13792750332298763796
> [ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=0 skb=0000000063dc595d
> [ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 status=0
> [ 185.651495] MPTCP: msk ack_seq=9bbc894565aa2f9a subflow ack_seq=9bbc894565aa2f9a
> [ 185.651496] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=1 skb=0000000012e809e1
>
> So this patch added these missing pr_fmt defines. Then we can get the same
> format string "MPTCP" in all mptcp logs like this:
>
> [ 142.795829] MPTCP: DSS
> [ 142.795829] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
> [ 142.795829] MPTCP: data_ack=8089704603109242421
> [ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=0 skb=00000000d5f230df
> [ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 status=0
> [ 142.795831] MPTCP: msk ack_seq=66790290f1199d9b subflow ack_seq=66790290f1199d9b
> [ 142.795831] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=1 skb=00000000de5aca2e
>
> Signed-off-by: Geliang Tang <geliangtang@gmail.com>
>
> ---
> Changes in v2:
> - add pr_fmt to C files, not headers.
Thank you for this v2 (sorry, it was in my spam folder).
I thought checkpatch.pl would have forced you to add a new blank line in
net/mptcp/pm.c after the copyright comment and before the beginning of
the code but it seems not. And there was no blank line before so I guess
it's OK like that!
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] mptcp: add some missing pr_fmt defines
2020-04-03 9:14 ` [PATCH v2] mptcp: add some missing pr_fmt defines Geliang Tang
2020-04-03 11:57 ` Matthieu Baerts
@ 2020-04-03 23:06 ` David Miller
1 sibling, 0 replies; 7+ messages in thread
From: David Miller @ 2020-04-03 23:06 UTC (permalink / raw)
To: geliangtang
Cc: mathew.j.martineau, matthieu.baerts, kuba, netdev, mptcp,
linux-kernel
From: Geliang Tang <geliangtang@gmail.com>
Date: Fri, 3 Apr 2020 17:14:08 +0800
> Some of the mptcp logs didn't print out the format string:
>
> [ 185.651493] DSS
> [ 185.651494] data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
> [ 185.651494] data_ack=13792750332298763796
> [ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=0 skb=0000000063dc595d
> [ 185.651495] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 status=0
> [ 185.651495] MPTCP: msk ack_seq=9bbc894565aa2f9a subflow ack_seq=9bbc894565aa2f9a
> [ 185.651496] MPTCP: msk=00000000c4b81cfc ssk=000000009743af53 data_avail=1 skb=0000000012e809e1
>
> So this patch added these missing pr_fmt defines. Then we can get the same
> format string "MPTCP" in all mptcp logs like this:
>
> [ 142.795829] MPTCP: DSS
> [ 142.795829] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
> [ 142.795829] MPTCP: data_ack=8089704603109242421
> [ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=0 skb=00000000d5f230df
> [ 142.795830] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 status=0
> [ 142.795831] MPTCP: msk ack_seq=66790290f1199d9b subflow ack_seq=66790290f1199d9b
> [ 142.795831] MPTCP: msk=00000000133a24e0 ssk=000000002e508c64 data_avail=1 skb=00000000de5aca2e
>
> Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] mptcp: move pr_fmt defining to protocol.h
2020-04-03 7:57 [PATCH] mptcp: move pr_fmt defining to protocol.h Geliang Tang
2020-04-03 9:14 ` [PATCH v2] mptcp: add some missing pr_fmt defines Geliang Tang
@ 2020-04-03 10:29 ` Matthieu Baerts
2020-04-03 11:41 ` Geliang Tang
2020-04-03 11:49 ` Geliang Tang
1 sibling, 2 replies; 7+ messages in thread
From: Matthieu Baerts @ 2020-04-03 10:29 UTC (permalink / raw)
To: Geliang Tang, Mat Martineau, David S. Miller, Jakub Kicinski
Cc: netdev, mptcp, linux-kernel
Hi Geliang,
On 03/04/2020 09:57, Geliang Tang wrote:
> Some of the mptcp logs didn't print out the format string "MPTCP":
>
> [ 129.185774] DSS
> [ 129.185774] data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
> [ 129.185774] data_ack=5481534886531492085
> [ 129.185775] data_seq=15725204003114694615 subflow_seq=1425409 data_len=5216
> [ 129.185776] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
> [ 129.185776] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=0 skb=0000000088f05424
> [ 129.185777] MPTCP: seq=15725204003114694615 is64=1 ssn=1425409 data_len=5216 data_fin=0
> [ 129.185777] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 status=0
> [ 129.185778] MPTCP: msk ack_seq=da3b25b9a233c2c7 subflow ack_seq=da3b25b9a233c2c7
> [ 129.185778] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=1 skb=000000000caed2cc
> [ 129.185779] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
>
> So this patch moves the pr_fmt defining from protocol.c to protocol.h, which
> is included by all the C files. Then we can get the same format string
> "MPTCP" in all mptcp logs like this:
>
> [ 141.854787] MPTCP: DSS
> [ 141.854788] MPTCP: data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
> [ 141.854788] MPTCP: data_ack=18028325517710311871
> [ 141.854788] MPTCP: data_seq=6163976859259356786 subflow_seq=3309569 data_len=8192
> [ 141.854789] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=0 skb=00000000dd95efc3
> [ 141.854789] MPTCP: seq=6163976859259356786 is64=1 ssn=3309569 data_len=8192 data_fin=0
> [ 141.854790] MPTCP: msk=000000005847a66a ssk=0000000022469903 status=0
> [ 141.854790] MPTCP: msk ack_seq=558ad84b9be1d162 subflow ack_seq=558ad84b9be1d162
> [ 141.854791] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=1 skb=000000000b8926f6
> [ 141.854791] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:0 remaining=28
> [ 141.854792] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:dcdf2f3b remaining=28
Good idea to uniform that.
I think it can be useful for MPTCP devs to add a different prefix in
each MPTCP .c files but this small improvement can be done later.
LGTM, thanks Geliang!
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] mptcp: move pr_fmt defining to protocol.h
2020-04-03 10:29 ` [PATCH] mptcp: move pr_fmt defining to protocol.h Matthieu Baerts
@ 2020-04-03 11:41 ` Geliang Tang
2020-04-03 11:49 ` Geliang Tang
1 sibling, 0 replies; 7+ messages in thread
From: Geliang Tang @ 2020-04-03 11:41 UTC (permalink / raw)
To: Matthieu Baerts
Cc: Mat Martineau, David S. Miller, Jakub Kicinski, netdev, mptcp,
linux-kernel
On Fri, Apr 03, 2020 at 12:29:27PM +0200, Matthieu Baerts wrote:
> Hi Geliang,
>
> On 03/04/2020 09:57, Geliang Tang wrote:
> > Some of the mptcp logs didn't print out the format string "MPTCP":
> >
> > [ 129.185774] DSS
> > [ 129.185774] data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
> > [ 129.185774] data_ack=5481534886531492085
> > [ 129.185775] data_seq=15725204003114694615 subflow_seq=1425409 data_len=5216
> > [ 129.185776] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
> > [ 129.185776] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=0 skb=0000000088f05424
> > [ 129.185777] MPTCP: seq=15725204003114694615 is64=1 ssn=1425409 data_len=5216 data_fin=0
> > [ 129.185777] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 status=0
> > [ 129.185778] MPTCP: msk ack_seq=da3b25b9a233c2c7 subflow ack_seq=da3b25b9a233c2c7
> > [ 129.185778] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=1 skb=000000000caed2cc
> > [ 129.185779] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
> >
> > So this patch moves the pr_fmt defining from protocol.c to protocol.h, which
> > is included by all the C files. Then we can get the same format string
> > "MPTCP" in all mptcp logs like this:
> >
> > [ 141.854787] MPTCP: DSS
> > [ 141.854788] MPTCP: data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
> > [ 141.854788] MPTCP: data_ack=18028325517710311871
> > [ 141.854788] MPTCP: data_seq=6163976859259356786 subflow_seq=3309569 data_len=8192
> > [ 141.854789] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=0 skb=00000000dd95efc3
> > [ 141.854789] MPTCP: seq=6163976859259356786 is64=1 ssn=3309569 data_len=8192 data_fin=0
> > [ 141.854790] MPTCP: msk=000000005847a66a ssk=0000000022469903 status=0
> > [ 141.854790] MPTCP: msk ack_seq=558ad84b9be1d162 subflow ack_seq=558ad84b9be1d162
> > [ 141.854791] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=1 skb=000000000b8926f6
> > [ 141.854791] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:0 remaining=28
> > [ 141.854792] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:dcdf2f3b remaining=28
>
> Good idea to uniform that.
> I think it can be useful for MPTCP devs to add a different prefix in each
> MPTCP .c files but this small improvement can be done later.
>
> LGTM, thanks Geliang!
>
> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Hi Matthieu,
Thanks for your reply.
I have already resend this patch to you, a better version, v2, added pr_fmt
in each .c files.
-Geliang
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] mptcp: move pr_fmt defining to protocol.h
2020-04-03 10:29 ` [PATCH] mptcp: move pr_fmt defining to protocol.h Matthieu Baerts
2020-04-03 11:41 ` Geliang Tang
@ 2020-04-03 11:49 ` Geliang Tang
1 sibling, 0 replies; 7+ messages in thread
From: Geliang Tang @ 2020-04-03 11:49 UTC (permalink / raw)
To: Matthieu Baerts
Cc: Mat Martineau, David S. Miller, Jakub Kicinski, netdev, mptcp,
linux-kernel
On Fri, Apr 03, 2020 at 12:29:27PM +0200, Matthieu Baerts wrote:
> Hi Geliang,
>
> On 03/04/2020 09:57, Geliang Tang wrote:
> > Some of the mptcp logs didn't print out the format string "MPTCP":
> >
> > [ 129.185774] DSS
> > [ 129.185774] data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
> > [ 129.185774] data_ack=5481534886531492085
> > [ 129.185775] data_seq=15725204003114694615 subflow_seq=1425409 data_len=5216
> > [ 129.185776] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
> > [ 129.185776] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=0 skb=0000000088f05424
> > [ 129.185777] MPTCP: seq=15725204003114694615 is64=1 ssn=1425409 data_len=5216 data_fin=0
> > [ 129.185777] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 status=0
> > [ 129.185778] MPTCP: msk ack_seq=da3b25b9a233c2c7 subflow ack_seq=da3b25b9a233c2c7
> > [ 129.185778] MPTCP: msk=00000000d5a704a6 ssk=00000000b5aabc31 data_avail=1 skb=000000000caed2cc
> > [ 129.185779] subflow=0000000093526a92 fully established=1 seq=0:0 remaining=28
> >
> > So this patch moves the pr_fmt defining from protocol.c to protocol.h, which
> > is included by all the C files. Then we can get the same format string
> > "MPTCP" in all mptcp logs like this:
> >
> > [ 141.854787] MPTCP: DSS
> > [ 141.854788] MPTCP: data_fin=0 dsn64=1 use_map=1 ack64=1 use_ack=1
> > [ 141.854788] MPTCP: data_ack=18028325517710311871
> > [ 141.854788] MPTCP: data_seq=6163976859259356786 subflow_seq=3309569 data_len=8192
> > [ 141.854789] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=0 skb=00000000dd95efc3
> > [ 141.854789] MPTCP: seq=6163976859259356786 is64=1 ssn=3309569 data_len=8192 data_fin=0
> > [ 141.854790] MPTCP: msk=000000005847a66a ssk=0000000022469903 status=0
> > [ 141.854790] MPTCP: msk ack_seq=558ad84b9be1d162 subflow ack_seq=558ad84b9be1d162
> > [ 141.854791] MPTCP: msk=000000005847a66a ssk=0000000022469903 data_avail=1 skb=000000000b8926f6
> > [ 141.854791] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:0 remaining=28
> > [ 141.854792] MPTCP: subflow=00000000e4e4579c fully established=1 seq=0:dcdf2f3b remaining=28
>
> Good idea to uniform that.
> I think it can be useful for MPTCP devs to add a different prefix in each
> MPTCP .c files but this small improvement can be done later.
>
> LGTM, thanks Geliang!
>
> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Hi Matthieu,
Thanks for your reply.
I have already resend this patch to you, patch v2, a better version, add
pr_fmt defines in each .c files.
-Geliang
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-04-03 23:06 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-03 7:57 [PATCH] mptcp: move pr_fmt defining to protocol.h Geliang Tang
2020-04-03 9:14 ` [PATCH v2] mptcp: add some missing pr_fmt defines Geliang Tang
2020-04-03 11:57 ` Matthieu Baerts
2020-04-03 23:06 ` David Miller
2020-04-03 10:29 ` [PATCH] mptcp: move pr_fmt defining to protocol.h Matthieu Baerts
2020-04-03 11:41 ` Geliang Tang
2020-04-03 11:49 ` Geliang Tang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).