[PATCH AUTOSEL 4.14 2/9] net: vxge: fix wrong __VA_ARGS__ usage

[PATCH AUTOSEL 4.14 2/9] net: vxge: fix wrong __VA_ARGS__ usage

[Sasha Levin]

From: Zheng Wei <wei.zheng@vivo.com>

[ Upstream commit b317538c47943f9903860d83cc0060409e12d2ff ]

printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix,
it causes a build error when there is no variable
arguments(e.g. only fmt is specified.).

Signed-off-by: Zheng Wei <wei.zheng@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/neterion/vxge/vxge-config.h |  2 +-
 drivers/net/ethernet/neterion/vxge/vxge-main.h   | 14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h
index cfa970417f818..fe4a4315d20d4 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-config.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.h
@@ -2065,7 +2065,7 @@ vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask);
 	if ((level >= VXGE_ERR && VXGE_COMPONENT_LL & VXGE_DEBUG_ERR_MASK) ||  \
 	    (level >= VXGE_TRACE && VXGE_COMPONENT_LL & VXGE_DEBUG_TRACE_MASK))\
 		if ((mask & VXGE_DEBUG_MASK) == mask)			       \
-			printk(fmt "\n", __VA_ARGS__);			       \
+			printk(fmt "\n", ##__VA_ARGS__);		       \
 } while (0)
 #else
 #define vxge_debug_ll(level, mask, fmt, ...)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.h b/drivers/net/ethernet/neterion/vxge/vxge-main.h
index 3a79d93b84453..5b535aa10d23e 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.h
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.h
@@ -454,49 +454,49 @@ int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override);
 
 #if (VXGE_DEBUG_LL_CONFIG & VXGE_DEBUG_MASK)
 #define vxge_debug_ll_config(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_ll_config(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_INIT & VXGE_DEBUG_MASK)
 #define vxge_debug_init(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_init(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_TX & VXGE_DEBUG_MASK)
 #define vxge_debug_tx(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_tx(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_RX & VXGE_DEBUG_MASK)
 #define vxge_debug_rx(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_rx(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_MEM & VXGE_DEBUG_MASK)
 #define vxge_debug_mem(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_mem(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK)
 #define vxge_debug_entryexit(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_entryexit(level, fmt, ...)
 #endif
 
 #if (VXGE_DEBUG_INTR & VXGE_DEBUG_MASK)
 #define vxge_debug_intr(level, fmt, ...) \
-	vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, __VA_ARGS__)
+	vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, ##__VA_ARGS__)
 #else
 #define vxge_debug_intr(level, fmt, ...)
 #endif
-- 
2.20.1

[PATCH AUTOSEL 4.14 3/9] hinic: fix a bug of waitting for IO stopped

[Sasha Levin]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit 96758117dc528e6d84bd23d205e8cf7f31eda029 ]

it's unreliable for fw to check whether IO is stopped, so driver
wait for enough time to ensure IO process is done in hw before
freeing resources

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/huawei/hinic/hinic_hw_dev.c  | 51 +------------------
 1 file changed, 2 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
index 46aba02b8672b..5763e333a9afe 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c
@@ -373,50 +373,6 @@ static int wait_for_db_state(struct hinic_hwdev *hwdev)
 	return -EFAULT;
 }
 
-static int wait_for_io_stopped(struct hinic_hwdev *hwdev)
-{
-	struct hinic_cmd_io_status cmd_io_status;
-	struct hinic_hwif *hwif = hwdev->hwif;
-	struct pci_dev *pdev = hwif->pdev;
-	struct hinic_pfhwdev *pfhwdev;
-	unsigned long end;
-	u16 out_size;
-	int err;
-
-	if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) {
-		dev_err(&pdev->dev, "Unsupported PCI Function type\n");
-		return -EINVAL;
-	}
-
-	pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev);
-
-	cmd_io_status.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
-
-	end = jiffies + msecs_to_jiffies(IO_STATUS_TIMEOUT);
-	do {
-		err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM,
-					HINIC_COMM_CMD_IO_STATUS_GET,
-					&cmd_io_status, sizeof(cmd_io_status),
-					&cmd_io_status, &out_size,
-					HINIC_MGMT_MSG_SYNC);
-		if ((err) || (out_size != sizeof(cmd_io_status))) {
-			dev_err(&pdev->dev, "Failed to get IO status, ret = %d\n",
-				err);
-			return err;
-		}
-
-		if (cmd_io_status.status == IO_STOPPED) {
-			dev_info(&pdev->dev, "IO stopped\n");
-			return 0;
-		}
-
-		msleep(20);
-	} while (time_before(jiffies, end));
-
-	dev_err(&pdev->dev, "Wait for IO stopped - Timeout\n");
-	return -ETIMEDOUT;
-}
-
 /**
  * clear_io_resource - set the IO resources as not active in the NIC
  * @hwdev: the NIC HW device
@@ -436,11 +392,8 @@ static int clear_io_resources(struct hinic_hwdev *hwdev)
 		return -EINVAL;
 	}
 
-	err = wait_for_io_stopped(hwdev);
-	if (err) {
-		dev_err(&pdev->dev, "IO has not stopped yet\n");
-		return err;
-	}
+	/* sleep 100ms to wait for firmware stopping I/O */
+	msleep(100);
 
 	cmd_clear_io_res.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 4/9] hinic: fix the bug of clearing event queue

[Sasha Levin]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit 614eaa943e9fc3fcdbd4aa0692ae84973d363333 ]

should disable eq irq before freeing it, must clear event queue
depth in hw before freeing relevant memory to avoid illegal
memory access and update consumer idx to avoid invalid interrupt

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/huawei/hinic/hinic_hw_eqs.c  | 24 +++++++++++++------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c
index 7cb8b9b94726d..1e631366b72b6 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c
@@ -197,7 +197,7 @@ static u8 eq_cons_idx_checksum_set(u32 val)
  * eq_update_ci - update the HW cons idx of event queue
  * @eq: the event queue to update the cons idx for
  **/
-static void eq_update_ci(struct hinic_eq *eq)
+static void eq_update_ci(struct hinic_eq *eq, u32 arm_state)
 {
 	u32 val, addr = EQ_CONS_IDX_REG_ADDR(eq);
 
@@ -211,7 +211,7 @@ static void eq_update_ci(struct hinic_eq *eq)
 
 	val |= HINIC_EQ_CI_SET(eq->cons_idx, IDX)    |
 	       HINIC_EQ_CI_SET(eq->wrapped, WRAPPED) |
-	       HINIC_EQ_CI_SET(EQ_ARMED, INT_ARMED);
+	       HINIC_EQ_CI_SET(arm_state, INT_ARMED);
 
 	val |= HINIC_EQ_CI_SET(eq_cons_idx_checksum_set(val), XOR_CHKSUM);
 
@@ -356,7 +356,7 @@ static void eq_irq_handler(void *data)
 	else if (eq->type == HINIC_CEQ)
 		ceq_irq_handler(eq);
 
-	eq_update_ci(eq);
+	eq_update_ci(eq, EQ_ARMED);
 }
 
 /**
@@ -711,7 +711,7 @@ static int init_eq(struct hinic_eq *eq, struct hinic_hwif *hwif,
 	}
 
 	set_eq_ctrls(eq);
-	eq_update_ci(eq);
+	eq_update_ci(eq, EQ_ARMED);
 
 	err = alloc_eq_pages(eq);
 	if (err) {
@@ -761,18 +761,28 @@ static int init_eq(struct hinic_eq *eq, struct hinic_hwif *hwif,
  **/
 static void remove_eq(struct hinic_eq *eq)
 {
-	struct msix_entry *entry = &eq->msix_entry;
-
-	free_irq(entry->vector, eq);
+	hinic_set_msix_state(eq->hwif, eq->msix_entry.entry,
+			     HINIC_MSIX_DISABLE);
+	free_irq(eq->msix_entry.vector, eq);
 
 	if (eq->type == HINIC_AEQ) {
 		struct hinic_eq_work *aeq_work = &eq->aeq_work;
 
 		cancel_work_sync(&aeq_work->work);
+		/* clear aeq_len to avoid hw access host memory */
+		hinic_hwif_write_reg(eq->hwif,
+				     HINIC_CSR_AEQ_CTRL_1_ADDR(eq->q_id), 0);
 	} else if (eq->type == HINIC_CEQ) {
 		tasklet_kill(&eq->ceq_tasklet);
+		/* clear ceq_len to avoid hw access host memory */
+		hinic_hwif_write_reg(eq->hwif,
+				     HINIC_CSR_CEQ_CTRL_1_ADDR(eq->q_id), 0);
 	}
 
+	/* update cons_idx to avoid invalid interrupt */
+	eq->cons_idx = hinic_hwif_read_reg(eq->hwif, EQ_PROD_IDX_REG_ADDR(eq));
+	eq_update_ci(eq, EQ_NOT_ARMED);
+
 	free_eq_pages(eq);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.14 5/9] hinic: fix wrong para of wait_for_completion_timeout

[Sasha Levin]

From: Luo bin <luobin9@huawei.com>

[ Upstream commit 0da7c322f116210ebfdda59c7da663a6fc5e9cc8 ]

the second input parameter of wait_for_completion_timeout should
be jiffies instead of millisecond

Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 3 ++-
 drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c | 5 +++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
index 7d95f0866fb0b..e1de97effcd24 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c
@@ -398,7 +398,8 @@ static int cmdq_sync_cmd_direct_resp(struct hinic_cmdq *cmdq,
 
 	spin_unlock_bh(&cmdq->cmdq_lock);
 
-	if (!wait_for_completion_timeout(&done, CMDQ_TIMEOUT)) {
+	if (!wait_for_completion_timeout(&done,
+					 msecs_to_jiffies(CMDQ_TIMEOUT))) {
 		spin_lock_bh(&cmdq->cmdq_lock);
 
 		if (cmdq->errcode[curr_prod_idx] == &errcode)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
index 278dc13f3dae8..9fcf2e5e00039 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c
@@ -52,7 +52,7 @@
 
 #define MSG_NOT_RESP                    0xFFFF
 
-#define MGMT_MSG_TIMEOUT                1000
+#define MGMT_MSG_TIMEOUT                5000
 
 #define mgmt_to_pfhwdev(pf_mgmt)        \
 		container_of(pf_mgmt, struct hinic_pfhwdev, pf_to_mgmt)
@@ -276,7 +276,8 @@ static int msg_to_mgmt_sync(struct hinic_pf_to_mgmt *pf_to_mgmt,
 		goto unlock_sync_msg;
 	}
 
-	if (!wait_for_completion_timeout(recv_done, MGMT_MSG_TIMEOUT)) {
+	if (!wait_for_completion_timeout(recv_done,
+					 msecs_to_jiffies(MGMT_MSG_TIMEOUT))) {
 		dev_err(&pdev->dev, "MGMT timeout, MSG id = %d\n", msg_id);
 		err = -ETIMEDOUT;
 		goto unlock_sync_msg;
-- 
2.20.1

[PATCH AUTOSEL 4.14 6/9] netfilter: nf_tables: Allow set back-ends to report partial overlaps on insertion

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 8c2d45b2b65ca1f215244be1c600236e83f9815f ]

Currently, the -EEXIST return code of ->insert() callbacks is ambiguous: it
might indicate that a given element (including intervals) already exists as
such, or that the new element would clash with existing ones.

If identical elements already exist, the front-end is ignoring this without
returning error, in case NLM_F_EXCL is not set. However, if the new element
can't be inserted due an overlap, we should report this to the user.

To this purpose, allow set back-ends to return -ENOTEMPTY on collision with
existing elements, translate that to -EEXIST, and return that to userspace,
no matter if NLM_F_EXCL was set.

Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 91490446ebb42..cda18a94385be 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -4058,6 +4058,11 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 				err = -EBUSY;
 			else if (!(nlmsg_flags & NLM_F_EXCL))
 				err = 0;
+		} else if (err == -ENOTEMPTY) {
+			/* ENOTEMPTY reports overlapping between this element
+			 * and an existing one.
+			 */
+			err = -EEXIST;
 		}
 		goto err5;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.14 7/9] cxgb4/ptp: pass the sign of offset delta in FW CMD

[Sasha Levin]

From: Raju Rangoju <rajur@chelsio.com>

[ Upstream commit 50e0d28d3808146cc19b0d5564ef4ba9e5bf3846 ]

cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta
in FW_PTP_CMD. Fix it by passing correct sign.

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
index 9f9d6cae39d55..758f2b8363282 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c
@@ -246,6 +246,9 @@ static int  cxgb4_ptp_fineadjtime(struct adapter *adapter, s64 delta)
 			     FW_PTP_CMD_PORTID_V(0));
 	c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16));
 	c.u.ts.sc = FW_PTP_SC_ADJ_FTIME;
+	c.u.ts.sign = (delta < 0) ? 1 : 0;
+	if (delta < 0)
+		delta = -delta;
 	c.u.ts.tm = cpu_to_be64(delta);
 
 	err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
-- 
2.20.1

[PATCH AUTOSEL 4.14 8/9] qlcnic: Fix bad kzalloc null test

[Sasha Levin]

From: Xu Wang <vulab@iscas.ac.cn>

[ Upstream commit bcaeb886ade124331a6f3a5cef34a3f1484c0a03 ]

In qlcnic_83xx_get_reset_instruction_template, the variable
of null test is bad, so correct it.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index 07f9067affc65..cda5b0a9e9489 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -1720,7 +1720,7 @@ static int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_d
 
 	ahw->reset.seq_error = 0;
 	ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL);
-	if (p_dev->ahw->reset.buff == NULL)
+	if (ahw->reset.buff == NULL)
 		return -ENOMEM;
 
 	p_buff = p_dev->ahw->reset.buff;
-- 
2.20.1