netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Mark Zhang <markz@mellanox.com>,
	linux-rdma@vger.kernel.org, Maor Gottlieb <maorg@mellanox.com>,
	netdev@vger.kernel.org, Saeed Mahameed <saeedm@mellanox.com>
Subject: [PATCH mlx5-next v2 2/6] net/mlx5: Enable SW-defined RoCEv2 UDP source port
Date: Mon, 13 Apr 2020 16:36:59 +0300	[thread overview]
Message-ID: <20200413133703.932731-3-leon@kernel.org> (raw)
In-Reply-To: <20200413133703.932731-1-leon@kernel.org>

From: Mark Zhang <markz@mellanox.com>

When this is enabled, UDP source port for RoCEv2 packets are defined
by software instead of firmware.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/main.c    | 32 +++++++++++++++++++
 include/linux/mlx5/mlx5_ifc.h                 |  5 ++-
 2 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 8b9182add689..bbe1a2110204 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -559,6 +559,31 @@ static int handle_hca_cap(struct mlx5_core_dev *dev, void *set_ctx)
 	return err;
 }
 
+static int handle_hca_cap_roce(struct mlx5_core_dev *dev, void *set_ctx)
+{
+	void *set_hca_cap;
+	int err;
+
+	if (!MLX5_CAP_GEN(dev, roce))
+		return 0;
+
+	err = mlx5_core_get_caps(dev, MLX5_CAP_ROCE);
+	if (err)
+		return err;
+
+	if (MLX5_CAP_ROCE(dev, sw_r_roce_src_udp_port) ||
+	    !MLX5_CAP_ROCE_MAX(dev, sw_r_roce_src_udp_port))
+		return 0;
+
+	set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability);
+	memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_ROCE],
+	       MLX5_ST_SZ_BYTES(roce_cap));
+	MLX5_SET(roce_cap, set_hca_cap, sw_r_roce_src_udp_port, 1);
+
+	err = set_caps(dev, set_ctx, MLX5_SET_HCA_CAP_OP_MOD_ROCE);
+	return err;
+}
+
 static int set_hca_cap(struct mlx5_core_dev *dev)
 {
 	int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in);
@@ -589,6 +614,13 @@ static int set_hca_cap(struct mlx5_core_dev *dev)
 		goto out;
 	}
 
+	memset(set_ctx, 0, set_sz);
+	err = handle_hca_cap_roce(dev, set_ctx);
+	if (err) {
+		mlx5_core_err(dev, "handle_hca_cap_roce failed\n");
+		goto out;
+	}
+
 out:
 	kfree(set_ctx);
 	return err;
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index a3b6c92e889e..95dd9cc1d979 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -74,6 +74,7 @@ enum {
 	MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE        = 0x0,
 	MLX5_SET_HCA_CAP_OP_MOD_ODP                   = 0x2,
 	MLX5_SET_HCA_CAP_OP_MOD_ATOMIC                = 0x3,
+	MLX5_SET_HCA_CAP_OP_MOD_ROCE                  = 0x4,
 };
 
 enum {
@@ -903,7 +904,9 @@ struct mlx5_ifc_per_protocol_networking_offload_caps_bits {
 
 struct mlx5_ifc_roce_cap_bits {
 	u8         roce_apm[0x1];
-	u8         reserved_at_1[0x1f];
+	u8         reserved_at_1[0x3];
+	u8         sw_r_roce_src_udp_port[0x1];
+	u8         reserved_at_5[0x1b];
 
 	u8         reserved_at_20[0x60];
 
-- 
2.25.2


  parent reply	other threads:[~2020-04-13 13:37 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-13 13:36 [PATCH rdma-next v2 0/6] Set flow_label and RoCEv2 UDP source port for datagram QP Leon Romanovsky
2020-04-13 13:36 ` [PATCH mlx5-next v2 1/6] net/mlx5: Refactor HCA capability set flow Leon Romanovsky
2020-04-13 20:47   ` Saeed Mahameed
2020-04-14  7:23     ` Leon Romanovsky
2020-04-13 13:36 ` Leon Romanovsky [this message]
2020-04-19 13:02 ` [PATCH rdma-next v2 0/6] Set flow_label and RoCEv2 UDP source port for datagram QP Leon Romanovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200413133703.932731-3-leon@kernel.org \
    --to=leon@kernel.org \
    --cc=dledford@redhat.com \
    --cc=jgg@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=maorg@mellanox.com \
    --cc=markz@mellanox.com \
    --cc=netdev@vger.kernel.org \
    --cc=saeedm@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).