From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
linux-rdma@vger.kernel.org, netdev@vger.kernel.org,
Saeed Mahameed <saeedm@mellanox.com>
Subject: [PATCH mlx5-next 05/13] net/mlx5: Open-code modify QP in the FPGA module
Date: Mon, 13 Apr 2020 17:23:00 +0300 [thread overview]
Message-ID: <20200413142308.936946-6-leon@kernel.org> (raw)
In-Reply-To: <20200413142308.936946-1-leon@kernel.org>
From: Leon Romanovsky <leonro@mellanox.com>
Remove dependency on qp.c from the FPGA by open coding
modify QP interface.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
.../ethernet/mellanox/mlx5/core/fpga/conn.c | 84 +++++++------------
1 file changed, 28 insertions(+), 56 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
index 1d49894399af..b00d834d2dbf 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
@@ -657,30 +657,29 @@ static void mlx5_fpga_conn_destroy_qp(struct mlx5_fpga_conn *conn)
mlx5_wq_destroy(&conn->qp.wq_ctrl);
}
-static inline int mlx5_fpga_conn_reset_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_reset_qp(struct mlx5_fpga_conn *conn)
{
struct mlx5_core_dev *mdev = conn->fdev->mdev;
+ u32 in[MLX5_ST_SZ_DW(qp_2rst_in)] = {};
mlx5_fpga_dbg(conn->fdev, "Modifying QP %u to RST\n", conn->qp.mqp.qpn);
- return mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2RST_QP, 0, NULL,
- &conn->qp.mqp);
+ MLX5_SET(qp_2rst_in, in, opcode, MLX5_CMD_OP_2RST_QP);
+ MLX5_SET(qp_2rst_in, in, qpn, conn->qp.mqp.qpn);
+
+ return mlx5_cmd_exec_in(mdev, qp_2rst, in);
}
-static inline int mlx5_fpga_conn_init_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_init_qp(struct mlx5_fpga_conn *conn)
{
+ u32 in[MLX5_ST_SZ_DW(rst2init_qp_in)] = {};
struct mlx5_fpga_device *fdev = conn->fdev;
struct mlx5_core_dev *mdev = fdev->mdev;
- u32 *qpc = NULL;
- int err;
+ u32 *qpc;
mlx5_fpga_dbg(conn->fdev, "Modifying QP %u to INIT\n", conn->qp.mqp.qpn);
- qpc = kzalloc(MLX5_ST_SZ_BYTES(qpc), GFP_KERNEL);
- if (!qpc) {
- err = -ENOMEM;
- goto out;
- }
+ qpc = MLX5_ADDR_OF(rst2init_qp_in, in, qpc);
MLX5_SET(qpc, qpc, st, MLX5_QP_ST_RC);
MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
@@ -691,32 +690,22 @@ static inline int mlx5_fpga_conn_init_qp(struct mlx5_fpga_conn *conn)
MLX5_SET(qpc, qpc, cqn_rcv, conn->cq.mcq.cqn);
MLX5_SET64(qpc, qpc, dbr_addr, conn->qp.wq_ctrl.db.dma);
- err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RST2INIT_QP, 0, qpc,
- &conn->qp.mqp);
- if (err) {
- mlx5_fpga_warn(fdev, "qp_modify RST2INIT failed: %d\n", err);
- goto out;
- }
+ MLX5_SET(rst2init_qp_in, in, opcode, MLX5_CMD_OP_RST2INIT_QP);
+ MLX5_SET(rst2init_qp_in, in, qpn, conn->qp.mqp.qpn);
-out:
- kfree(qpc);
- return err;
+ return mlx5_cmd_exec_in(mdev, rst2init_qp, in);
}
-static inline int mlx5_fpga_conn_rtr_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_rtr_qp(struct mlx5_fpga_conn *conn)
{
+ u32 in[MLX5_ST_SZ_DW(init2rtr_qp_in)] = {};
struct mlx5_fpga_device *fdev = conn->fdev;
struct mlx5_core_dev *mdev = fdev->mdev;
- u32 *qpc = NULL;
- int err;
+ u32 *qpc;
mlx5_fpga_dbg(conn->fdev, "QP RTR\n");
- qpc = kzalloc(MLX5_ST_SZ_BYTES(qpc), GFP_KERNEL);
- if (!qpc) {
- err = -ENOMEM;
- goto out;
- }
+ qpc = MLX5_ADDR_OF(init2rtr_qp_in, in, qpc);
MLX5_SET(qpc, qpc, mtu, MLX5_QPC_MTU_1K_BYTES);
MLX5_SET(qpc, qpc, log_msg_max, (u8)MLX5_CAP_GEN(mdev, log_max_msg));
@@ -736,33 +725,22 @@ static inline int mlx5_fpga_conn_rtr_qp(struct mlx5_fpga_conn *conn)
MLX5_ADDR_OF(fpga_qpc, conn->fpga_qpc, fpga_ip),
MLX5_FLD_SZ_BYTES(qpc, primary_address_path.rgid_rip));
- err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_INIT2RTR_QP, 0, qpc,
- &conn->qp.mqp);
- if (err) {
- mlx5_fpga_warn(fdev, "qp_modify RST2INIT failed: %d\n", err);
- goto out;
- }
+ MLX5_SET(init2rtr_qp_in, in, opcode, MLX5_CMD_OP_INIT2RTR_QP);
+ MLX5_SET(init2rtr_qp_in, in, qpn, conn->qp.mqp.qpn);
-out:
- kfree(qpc);
- return err;
+ return mlx5_cmd_exec_in(mdev, init2rtr_qp, in);
}
-static inline int mlx5_fpga_conn_rts_qp(struct mlx5_fpga_conn *conn)
+static int mlx5_fpga_conn_rts_qp(struct mlx5_fpga_conn *conn)
{
struct mlx5_fpga_device *fdev = conn->fdev;
+ u32 in[MLX5_ST_SZ_DW(rtr2rts_qp_in)] = {};
struct mlx5_core_dev *mdev = fdev->mdev;
- u32 *qpc = NULL;
- u32 opt_mask;
- int err;
+ u32 *qpc;
mlx5_fpga_dbg(conn->fdev, "QP RTS\n");
- qpc = kzalloc(MLX5_ST_SZ_BYTES(qpc), GFP_KERNEL);
- if (!qpc) {
- err = -ENOMEM;
- goto out;
- }
+ qpc = MLX5_ADDR_OF(rtr2rts_qp_in, in, qpc);
MLX5_SET(qpc, qpc, log_ack_req_freq, 8);
MLX5_SET(qpc, qpc, min_rnr_nak, 0x12);
@@ -772,17 +750,11 @@ static inline int mlx5_fpga_conn_rts_qp(struct mlx5_fpga_conn *conn)
MLX5_SET(qpc, qpc, retry_count, 7);
MLX5_SET(qpc, qpc, rnr_retry, 7); /* Infinite retry if RNR NACK */
- opt_mask = MLX5_QP_OPTPAR_RNR_TIMEOUT;
- err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RTR2RTS_QP, opt_mask, qpc,
- &conn->qp.mqp);
- if (err) {
- mlx5_fpga_warn(fdev, "qp_modify RST2INIT failed: %d\n", err);
- goto out;
- }
+ MLX5_SET(rtr2rts_qp_in, in, opcode, MLX5_CMD_OP_RTR2RTS_QP);
+ MLX5_SET(rtr2rts_qp_in, in, qpn, conn->qp.mqp.qpn);
+ MLX5_SET(rtr2rts_qp_in, in, opt_param_mask, MLX5_QP_OPTPAR_RNR_TIMEOUT);
-out:
- kfree(qpc);
- return err;
+ return mlx5_cmd_exec_in(mdev, rtr2rts_qp, in);
}
static int mlx5_fpga_conn_connect(struct mlx5_fpga_conn *conn)
--
2.25.2
next prev parent reply other threads:[~2020-04-13 14:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 14:22 [PATCH mlx5-next 00/13] Move QP code to be under mlx5_ib responsibility Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 01/13] net/mlx5: Provide simplified command interfaces Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 02/13] net/mlx5: Open-code create and destroy QP calls Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 03/13] net/mlx5: Remove empty QP and CQ events handlers Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 04/13] net/mlx5: Open-code modify QP in steering module Leon Romanovsky
2020-04-13 14:23 ` Leon Romanovsky [this message]
2020-04-13 14:23 ` [PATCH mlx5-next 06/13] net/mlx5: Open-code modify QP in the IPoIB module Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 07/13] net/mlx5: Remove extra indirection while storing QPN Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 08/13] net/mlx5: Replace hand written QP context struct with automatic getters Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 09/13] net/mlx5: Remove Q counter low level helper APIs Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 11/13] net/mlx5: Delete not-used cmd header Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 13/13] net/mlx5: Move QP logic to mlx5_ib Leon Romanovsky
2020-04-19 12:56 ` [PATCH mlx5-next 00/13] Move QP code to be under mlx5_ib responsibility Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200413142308.936946-6-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).