From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
linux-rdma@vger.kernel.org, netdev@vger.kernel.org,
Saeed Mahameed <saeedm@mellanox.com>
Subject: [PATCH mlx5-next 06/13] net/mlx5: Open-code modify QP in the IPoIB module
Date: Mon, 13 Apr 2020 17:23:01 +0300 [thread overview]
Message-ID: <20200413142308.936946-7-leon@kernel.org> (raw)
In-Reply-To: <20200413142308.936946-1-leon@kernel.org>
From: Leon Romanovsky <leonro@mellanox.com>
Remove dependency on qp.c from the IPoIB by open coding
modify QP interface.
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
.../ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 76 ++++++++++---------
1 file changed, 42 insertions(+), 34 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index 8bca11cb1e19..83b198d8e3d6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -161,44 +161,54 @@ int mlx5i_init_underlay_qp(struct mlx5e_priv *priv)
struct mlx5_core_dev *mdev = priv->mdev;
struct mlx5i_priv *ipriv = priv->ppriv;
struct mlx5_core_qp *qp = &ipriv->qp;
- struct mlx5_qp_context *context;
int ret;
- /* QP states */
- context = kzalloc(sizeof(*context), GFP_KERNEL);
- if (!context)
- return -ENOMEM;
+ {
+ u32 in[MLX5_ST_SZ_DW(rst2init_qp_in)] = {};
+ u32 *qpc;
- context->flags = cpu_to_be32(MLX5_QP_PM_MIGRATED << 11);
- context->pri_path.port = 1;
- context->pri_path.pkey_index = cpu_to_be16(ipriv->pkey_index);
- context->qkey = cpu_to_be32(IB_DEFAULT_Q_KEY);
+ qpc = MLX5_ADDR_OF(rst2init_qp_in, in, qpc);
- ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RST2INIT_QP, 0, context, qp);
- if (ret) {
- mlx5_core_err(mdev, "Failed to modify qp RST2INIT, err: %d\n", ret);
- goto err_qp_modify_to_err;
- }
- memset(context, 0, sizeof(*context));
+ MLX5_SET(qpc, qpc, pm_state, MLX5_QP_PM_MIGRATED);
+ MLX5_SET(qpc, qpc, primary_address_path.pkey_index,
+ ipriv->pkey_index);
+ MLX5_SET(qpc, qpc, primary_address_path.vhca_port_num, 1);
+ MLX5_SET(qpc, qpc, q_key, IB_DEFAULT_Q_KEY);
- ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_INIT2RTR_QP, 0, context, qp);
- if (ret) {
- mlx5_core_err(mdev, "Failed to modify qp INIT2RTR, err: %d\n", ret);
- goto err_qp_modify_to_err;
+ MLX5_SET(rst2init_qp_in, in, opcode, MLX5_CMD_OP_RST2INIT_QP);
+ MLX5_SET(rst2init_qp_in, in, qpn, qp->qpn);
+ ret = mlx5_cmd_exec_in(mdev, rst2init_qp, in);
+ if (ret)
+ goto err_qp_modify_to_err;
}
-
- ret = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_RTR2RTS_QP, 0, context, qp);
- if (ret) {
- mlx5_core_err(mdev, "Failed to modify qp RTR2RTS, err: %d\n", ret);
- goto err_qp_modify_to_err;
+ {
+ u32 in[MLX5_ST_SZ_DW(init2rtr_qp_in)] = {};
+
+ MLX5_SET(init2rtr_qp_in, in, opcode, MLX5_CMD_OP_INIT2RTR_QP);
+ MLX5_SET(init2rtr_qp_in, in, qpn, qp->qpn);
+ ret = mlx5_cmd_exec_in(mdev, init2rtr_qp, in);
+ if (ret)
+ goto err_qp_modify_to_err;
+ }
+ {
+ u32 in[MLX5_ST_SZ_DW(rtr2rts_qp_in)] = {};
+
+ MLX5_SET(rtr2rts_qp_in, in, opcode, MLX5_CMD_OP_RTR2RTS_QP);
+ MLX5_SET(rtr2rts_qp_in, in, qpn, qp->qpn);
+ ret = mlx5_cmd_exec_in(mdev, rtr2rts_qp, in);
+ if (ret)
+ goto err_qp_modify_to_err;
}
-
- kfree(context);
return 0;
err_qp_modify_to_err:
- mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2ERR_QP, 0, &context, qp);
- kfree(context);
+ {
+ u32 in[MLX5_ST_SZ_DW(qp_2err_in)] = {};
+
+ MLX5_SET(qp_2err_in, in, opcode, MLX5_CMD_OP_2ERR_QP);
+ MLX5_SET(qp_2err_in, in, qpn, qp->qpn);
+ mlx5_cmd_exec_in(mdev, qp_2err, in);
+ }
return ret;
}
@@ -206,13 +216,11 @@ void mlx5i_uninit_underlay_qp(struct mlx5e_priv *priv)
{
struct mlx5i_priv *ipriv = priv->ppriv;
struct mlx5_core_dev *mdev = priv->mdev;
- struct mlx5_qp_context context;
- int err;
+ u32 in[MLX5_ST_SZ_DW(qp_2rst_in)] = {};
- err = mlx5_core_qp_modify(mdev, MLX5_CMD_OP_2RST_QP, 0, &context,
- &ipriv->qp);
- if (err)
- mlx5_core_err(mdev, "Failed to modify qp 2RST, err: %d\n", err);
+ MLX5_SET(qp_2rst_in, in, opcode, MLX5_CMD_OP_2RST_QP);
+ MLX5_SET(qp_2rst_in, in, qpn, ipriv->qp.qpn);
+ mlx5_cmd_exec_in(mdev, qp_2rst, in);
}
#define MLX5_QP_ENHANCED_ULP_STATELESS_MODE 2
--
2.25.2
next prev parent reply other threads:[~2020-04-13 14:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 14:22 [PATCH mlx5-next 00/13] Move QP code to be under mlx5_ib responsibility Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 01/13] net/mlx5: Provide simplified command interfaces Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 02/13] net/mlx5: Open-code create and destroy QP calls Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 03/13] net/mlx5: Remove empty QP and CQ events handlers Leon Romanovsky
2020-04-13 14:22 ` [PATCH mlx5-next 04/13] net/mlx5: Open-code modify QP in steering module Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 05/13] net/mlx5: Open-code modify QP in the FPGA module Leon Romanovsky
2020-04-13 14:23 ` Leon Romanovsky [this message]
2020-04-13 14:23 ` [PATCH mlx5-next 07/13] net/mlx5: Remove extra indirection while storing QPN Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 08/13] net/mlx5: Replace hand written QP context struct with automatic getters Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 09/13] net/mlx5: Remove Q counter low level helper APIs Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 11/13] net/mlx5: Delete not-used cmd header Leon Romanovsky
2020-04-13 14:23 ` [PATCH mlx5-next 13/13] net/mlx5: Move QP logic to mlx5_ib Leon Romanovsky
2020-04-19 12:56 ` [PATCH mlx5-next 00/13] Move QP code to be under mlx5_ib responsibility Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200413142308.936946-7-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=saeedm@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).