[PATCH net 0/4] net: dsa: b53: Various ARL fixes

[Florian Fainelli <f.fainelli@gmail.com>]

Hi David, Andrew, Vivien, Jakub,

This patch series fixes a number of short comings in the existing b53
driver ARL management logic in particular:

- we were not looking up the {MAC,VID} tuples against their VID, despite
  having VLANs enabled

- the MDB entries (multicast) would lose their validity as soon as a
  single port in the vector would leave the entry

- the ARL was currently under utilized because we would always place new
  entries in bin index #1, instead of using all possible bins available,
  thus reducing the ARL effective size by 50% or 75% depending on the
  switch generation

- it was possible to overwrite the ARL entries because no proper space
  verification was done

This patch series addresses all of these issues.

Florian Fainelli (4):
  net: dsa: b53: Lookup VID in ARL searches when VLAN is enabled
  net: dsa: b53: Fix valid setting for MDB entries
  net: dsa: b53: Fix ARL register definitions
  net: dsa: b53: Rework ARL bin logic

 drivers/net/dsa/b53/b53_common.c | 31 ++++++++++++++++++++++++++-----
 drivers/net/dsa/b53/b53_regs.h   |  4 ++--
 2 files changed, 28 insertions(+), 7 deletions(-)

-- 
2.17.1