[PATCH AUTOSEL 4.4 07/14] slcan: Don't transmit uninitialized stack data in padding

[PATCH AUTOSEL 4.4 07/14] slcan: Don't transmit uninitialized stack data in padding

[Sasha Levin]

From: Richard Palethorpe <rpalethorpe@suse.com>

[ Upstream commit b9258a2cece4ec1f020715fe3554bc2e360f6264 ]

struct can_frame contains some padding which is not explicitly zeroed in
slc_bump. This uninitialized data will then be transmitted if the stack
initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL).

This commit just zeroes the whole struct including the padding.

Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Fixes: a1044e36e457 ("can: add slcan driver for serial/USB-serial CAN adapters")
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: security@kernel.org
Cc: wg@grandegger.com
Cc: mkl@pengutronix.de
Cc: davem@davemloft.net
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/slcan.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index 27f42763eaf5a..5bacb019ec1f8 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -147,7 +147,7 @@ static void slc_bump(struct slcan *sl)
 	u32 tmpid;
 	char *cmd = sl->rbuff;
 
-	cf.can_id = 0;
+	memset(&cf, 0, sizeof(cf));
 
 	switch (*cmd) {
 	case 'r':
@@ -186,8 +186,6 @@ static void slc_bump(struct slcan *sl)
 	else
 		return;
 
-	*(u64 *) (&cf.data) = 0; /* clear payload */
-
 	/* RTR frames may have a dlc > 0 but they never have any data bytes */
 	if (!(cf.can_id & CAN_RTR_FLAG)) {
 		for (i = 0; i < cf.can_dlc; i++) {
-- 
2.20.1

[PATCH AUTOSEL 4.4 08/14] net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting

[Sasha Levin]

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

[ Upstream commit 3e1221acf6a8f8595b5ce354bab4327a69d54d18 ]

Commit 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address
entries") cleared the unused mac address entries, but introduced an
out-of bounds mac address register programming bug -- After setting
the secondary unicast mac addresses, the "reg" value has reached
netdev_uc_count() + 1, thus we should only clear address entries
if (addr < perfect_addr_number)

Fixes: 9463c4455900 ("net: stmmac: dwmac1000: Clear unused address entries")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 1df84c8de9d75..b535f6c378386 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -188,7 +188,7 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
 			reg++;
 		}
 
-		while (reg <= perfect_addr_number) {
+		while (reg < perfect_addr_number) {
 			writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
 			writel(0, ioaddr + GMAC_ADDR_LOW(reg));
 			reg++;
-- 
2.20.1