[PATCH net-next] net: phy: Propagate error from bus->reset

[Florian Fainelli <f.fainelli@gmail.com>]

If a bus->reset() call for the mii_bus structure returns an error (e.g.:
-EPROE_DEFER) we should propagate it accordingly.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/phy/mdio_bus.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 7a4eb3f2cb74..346e88435d29 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -627,8 +627,11 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 		gpiod_set_value_cansleep(gpiod, 0);
 	}
 
-	if (bus->reset)
-		bus->reset(bus);
+	if (bus->reset) {
+		err = bus->reset(bus);
+		if (err)
+			goto error_reset_gpiod;
+	}
 
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
 		if ((bus->phy_mask & (1 << i)) == 0) {
@@ -657,7 +660,7 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 		mdiodev->device_remove(mdiodev);
 		mdiodev->device_free(mdiodev);
 	}
-
+error_reset_gpiod:
 	/* Put PHYs in RESET to save power */
 	if (bus->reset_gpiod)
 		gpiod_set_value_cansleep(bus->reset_gpiod, 1);
-- 
2.19.1