netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/5] stmmac: intel: Check return value of clk_prepare_enable()
Date: Wed, 29 Apr 2020 17:04:45 +0300	[thread overview]
Message-ID: <20200429140449.9484-1-andriy.shevchenko@linux.intel.com> (raw)

clk_prepare_enable() might fail, we have to check its returned value.

While at it, remove leftover in stmmac_pci, also remove unneeded condition
for NULL-aware clk_unregister_fixed_rate() call and call it when
stmmac_dvr_probe() fails.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-intel.c  | 18 ++++++++++++++----
 .../net/ethernet/stmicro/stmmac/stmmac_pci.c   |  3 ---
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 2e4aaedb93f580..5975c1e850425e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -252,6 +252,7 @@ static void common_default_data(struct plat_stmmacenet_data *plat)
 static int intel_mgbe_common_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	int ret;
 	int i;
 
 	plat->clk_csr = 5;
@@ -324,7 +325,12 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 		dev_warn(&pdev->dev, "Fail to register stmmac-clk\n");
 		plat->stmmac_clk = NULL;
 	}
-	clk_prepare_enable(plat->stmmac_clk);
+
+	ret = clk_prepare_enable(plat->stmmac_clk);
+	if (ret) {
+		clk_unregister_fixed_rate(plat->stmmac_clk);
+		return ret;
+	}
 
 	/* Set default value for multicast hash bins */
 	plat->multicast_filter_bins = HASH_TABLE_SIZE;
@@ -657,7 +663,12 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	res.wol_irq = pdev->irq;
 	res.irq = pdev->irq;
 
-	return stmmac_dvr_probe(&pdev->dev, plat, &res);
+	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
+	if (ret) {
+		clk_unregister_fixed_rate(plat->stmmac_clk);
+	}
+
+	return ret;
 }
 
 /**
@@ -675,8 +686,7 @@ static void intel_eth_pci_remove(struct pci_dev *pdev)
 
 	stmmac_dvr_remove(&pdev->dev);
 
-	if (priv->plat->stmmac_clk)
-		clk_unregister_fixed_rate(priv->plat->stmmac_clk);
+	clk_unregister_fixed_rate(priv->plat->stmmac_clk);
 
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index 3fb21f7ac9fbee..cf6b8f382e504f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -223,9 +223,6 @@ static void stmmac_pci_remove(struct pci_dev *pdev)
 
 	stmmac_dvr_remove(&pdev->dev);
 
-	if (priv->plat->stmmac_clk)
-		clk_unregister_fixed_rate(priv->plat->stmmac_clk);
-
 	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		if (pci_resource_len(pdev, i) == 0)
 			continue;
-- 
2.26.2


             reply	other threads:[~2020-04-29 14:04 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-29 14:04 Andy Shevchenko [this message]
2020-04-29 14:04 ` [PATCH v1 2/5] stmmac: intel: Remove unnecessary loop for PCI BARs Andy Shevchenko
2020-04-29 14:04 ` [PATCH v1 3/5] stmmac: intel: Convert to use pci_alloc_irq_vectors() API Andy Shevchenko
2020-04-29 14:04 ` [PATCH v1 4/5] stmmac: intel: Eliminate useless conditions and variables Andy Shevchenko
2020-04-29 14:04 ` [PATCH v1 5/5] stmmac: intel: Fix indentation to put on one line affected code Andy Shevchenko
2020-04-29 14:22 ` [PATCH v1 1/5] stmmac: intel: Check return value of clk_prepare_enable() Andy Shevchenko
2020-04-29 19:13 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200429140449.9484-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).