[PATCH AUTOSEL 4.4 03/11] wimax/i2400m: Fix potential urb refcnt leak

[PATCH AUTOSEL 4.4 03/11] wimax/i2400m: Fix potential urb refcnt leak

[Sasha Levin]

From: Xiyu Yang <xiyuyang19@fudan.edu.cn>

[ Upstream commit 7717cbec172c3554d470023b4020d5781961187e ]

i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the
refcount of the "notif_urb".

When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.

The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which
forget to decrease the refcnt increased by usb_get_urb(), causing a
refcnt leak.

Fix this issue by calling usb_put_urb() before the
i2400mu_bus_bm_wait_for_ack() returns.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wimax/i2400m/usb-fw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c
index e74664b84925e..4e4167976acf6 100644
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -354,6 +354,7 @@ out:
 		usb_autopm_put_interface(i2400mu->usb_iface);
 	d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n",
 		i2400m, ack, ack_size, (long) result);
+	usb_put_urb(&notif_urb);
 	return result;
 
 error_exceeded:
-- 
2.20.1

[PATCH AUTOSEL 4.4 04/11] team: fix hang in team_mode_get()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 1c30fbc76b8f0c07c92a8ca4cd7c456612e17eb5 ]

When team mode is changed or set, the team_mode_get() is called to check
whether the mode module is inserted or not. If the mode module is not
inserted, it calls the request_module().
In the request_module(), it creates a child process, which is
the "modprobe" process and waits for the done of the child process.
At this point, the following locks were used.
down_read(&cb_lock()); by genl_rcv()
    genl_lock(); by genl_rcv_msc()
        rtnl_lock(); by team_nl_cmd_options_set()
            mutex_lock(&team->lock); by team_nl_team_get()

Concurrently, the team module could be removed by rmmod or "modprobe -r"
The __exit function of team module is team_module_exit(), which calls
team_nl_fini() and it tries to acquire following locks.
down_write(&cb_lock);
    genl_lock();
Because of the genl_lock() and cb_lock, this process can't be finished
earlier than request_module() routine.

The problem secenario.
CPU0                                     CPU1
team_mode_get
    request_module()
                                         modprobe -r team_mode_roundrobin
                                                     team <--(B)
        modprobe team <--(A)
            team_mode_roundrobin

By request_module(), the "modprobe team_mode_roundrobin" command
will be executed. At this point, the modprobe process will decide
that the team module should be inserted before team_mode_roundrobin.
Because the team module is being removed.

By the module infrastructure, the same module insert/remove operations
can't be executed concurrently.
So, (A) waits for (B) but (B) also waits for (A) because of locks.
So that the hang occurs at this point.

Test commands:
    while :
    do
        teamd -d &
	killall teamd &
	modprobe -rv team_mode_roundrobin &
    done

The approach of this patch is to hold the reference count of the team
module if the team module is compiled as a module. If the reference count
of the team module is not zero while request_module() is being called,
the team module will not be removed at that moment.
So that the above scenario could not occur.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/team/team.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index e51fb7cb77282..d0943415aeff1 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -466,6 +466,9 @@ static const struct team_mode *team_mode_get(const char *kind)
 	struct team_mode_item *mitem;
 	const struct team_mode *mode = NULL;
 
+	if (!try_module_get(THIS_MODULE))
+		return NULL;
+
 	spin_lock(&mode_list_lock);
 	mitem = __find_mode(kind);
 	if (!mitem) {
@@ -481,6 +484,7 @@ static const struct team_mode *team_mode_get(const char *kind)
 	}
 
 	spin_unlock(&mode_list_lock);
+	module_put(THIS_MODULE);
 	return mode;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 06/11] macvlan: fix null dereference in macvlan_device_event()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 4dee15b4fd0d61ec6bbd179238191e959d34cf7a ]

In the macvlan_device_event(), the list_first_entry_or_null() is used.
This function could return null pointer if there is no node.
But, the macvlan module doesn't check the null pointer.
So, null-ptr-deref would occur.

      bond0
        |
   +----+-----+
   |          |
macvlan0   macvlan1
   |          |
 dummy0     dummy1

The problem scenario.
If dummy1 is removed,
1. ->dellink() of dummy1 is called.
2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module.
3. ->dellink() of macvlan1 is called.
4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module.
5. __bond_release_one() is called and it internally calls
   dev_set_mac_address().
6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1,
   which is macvlan_set_mac_address().
7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1.
8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module.
9. In the macvlan_device_event(), it calls list_first_entry_or_null().
At this point, dummy1 and macvlan1 were removed.
So, list_first_entry_or_null() will return NULL.

Test commands:
    ip netns add nst
    ip netns exec nst ip link add bond0 type bond
    for i in {0..10}
    do
        ip netns exec nst ip link add dummy$i type dummy
	ip netns exec nst ip link add macvlan$i link dummy$i \
		type macvlan mode passthru
	ip netns exec nst ip link set macvlan$i master bond0
    done
    ip netns del nst

Splat looks like:
[   40.585687][  T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI
[   40.587249][  T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[   40.588342][  T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532
[   40.589299][  T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   40.590469][  T146] Workqueue: netns cleanup_net
[   40.591045][  T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan]
[   40.591905][  T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2
[   40.594126][  T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246
[   40.594783][  T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   40.595653][  T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360
[   40.596495][  T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421
[   40.597377][  T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008
[   40.598186][  T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a
[   40.599012][  T146] FS:  0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000
[   40.600004][  T146] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.600665][  T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0
[   40.601485][  T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   40.602461][  T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   40.603443][  T146] Call Trace:
[   40.603871][  T146]  ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables]
[   40.604587][  T146]  ? macvlan_uninit+0x100/0x100 [macvlan]
[   40.605212][  T146]  ? __module_text_address+0x13/0x140
[   40.605842][  T146]  notifier_call_chain+0x90/0x160
[   40.606477][  T146]  dev_set_mac_address+0x28e/0x3f0
[   40.607117][  T146]  ? netdev_notify_peers+0xc0/0xc0
[   40.607762][  T146]  ? __module_text_address+0x13/0x140
[   40.608440][  T146]  ? notifier_call_chain+0x90/0x160
[   40.609097][  T146]  ? dev_set_mac_address+0x1f0/0x3f0
[   40.609758][  T146]  dev_set_mac_address+0x1f0/0x3f0
[   40.610402][  T146]  ? __local_bh_enable_ip+0xe9/0x1b0
[   40.611071][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.611823][  T146]  ? netdev_notify_peers+0xc0/0xc0
[   40.612461][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.613213][  T146]  ? bond_hw_addr_flush+0x77/0x100 [bonding]
[   40.613963][  T146]  ? __local_bh_enable_ip+0xe9/0x1b0
[   40.614631][  T146]  ? bond_time_in_interval.isra.31+0x90/0x90 [bonding]
[   40.615484][  T146]  ? __bond_release_one+0x9f0/0x12c0 [bonding]
[   40.616230][  T146]  __bond_release_one+0x9f0/0x12c0 [bonding]
[   40.616949][  T146]  ? bond_enslave+0x47c0/0x47c0 [bonding]
[   40.617642][  T146]  ? lock_downgrade+0x730/0x730
[   40.618218][  T146]  ? check_flags.part.42+0x450/0x450
[   40.618850][  T146]  ? __mutex_unlock_slowpath+0xd0/0x670
[   40.619519][  T146]  ? trace_hardirqs_on+0x30/0x180
[   40.620117][  T146]  ? wait_for_completion+0x250/0x250
[   40.620754][  T146]  bond_netdev_event+0x822/0x970 [bonding]
[   40.621460][  T146]  ? __module_text_address+0x13/0x140
[   40.622097][  T146]  notifier_call_chain+0x90/0x160
[   40.622806][  T146]  rollback_registered_many+0x660/0xcf0
[   40.623522][  T146]  ? netif_set_real_num_tx_queues+0x780/0x780
[   40.624290][  T146]  ? notifier_call_chain+0x90/0x160
[   40.624957][  T146]  ? netdev_upper_dev_unlink+0x114/0x180
[   40.625686][  T146]  ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30
[   40.626421][  T146]  ? mutex_is_locked+0x13/0x50
[   40.627016][  T146]  ? unregister_netdevice_queue+0xf2/0x240
[   40.627663][  T146]  unregister_netdevice_many.part.134+0x13/0x1b0
[   40.628362][  T146]  default_device_exit_batch+0x2d9/0x390
[   40.628987][  T146]  ? unregister_netdevice_many+0x40/0x40
[   40.629615][  T146]  ? dev_change_net_namespace+0xcb0/0xcb0
[   40.630279][  T146]  ? prepare_to_wait_exclusive+0x2e0/0x2e0
[   40.630943][  T146]  ? ops_exit_list.isra.9+0x97/0x140
[   40.631554][  T146]  cleanup_net+0x441/0x890
[ ... ]

Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode")
Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 84767722065a8..d5d4d109ee106 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -1561,7 +1561,7 @@ static int macvlan_device_event(struct notifier_block *unused,
 						struct macvlan_dev,
 						list);
 
-		if (macvlan_sync_address(vlan->dev, dev->dev_addr))
+		if (vlan && macvlan_sync_address(vlan->dev, dev->dev_addr))
 			return NOTIFY_BAD;
 
 		break;
-- 
2.20.1

[PATCH AUTOSEL 4.4 10/11] net: bcmgenet: suppress warnings on failed Rx SKB allocations

[Sasha Levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit ecaeceb8a8a145d93c7e136f170238229165348f ]

The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.

However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.

This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 34fae5576b603..4b3b396bd8ebe 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1575,7 +1575,8 @@ static struct sk_buff *bcmgenet_rx_refill(struct bcmgenet_priv *priv,
 	dma_addr_t mapping;
 
 	/* Allocate a new Rx skb */
-	skb = netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT);
+	skb = __netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT,
+				 GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
 		priv->mib.alloc_rx_buff_failed++;
 		netif_err(priv, rx_err, priv->dev,
-- 
2.20.1

[PATCH AUTOSEL 4.4 11/11] net: systemport: suppress warnings on failed Rx SKB allocations

[Sasha Levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 3554e54a46125030c534820c297ed7f6c3907e24 ]

The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.

However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.

This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 3cb99ce7325b7..d46ea7a5e0886 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -526,7 +526,8 @@ static struct sk_buff *bcm_sysport_rx_refill(struct bcm_sysport_priv *priv,
 	dma_addr_t mapping;
 
 	/* Allocate a new SKB for a new packet */
-	skb = netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH);
+	skb = __netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH,
+				 GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
 		priv->mib.alloc_rx_buff_failed++;
 		netif_err(priv, rx_err, ndev, "SKB alloc failed\n");
-- 
2.20.1