* [PATCH 07/14] docs: add IRQ documentation at the core-api book [not found] <cover.1588345503.git.mchehab+huawei@kernel.org> @ 2020-05-01 15:37 ` Mauro Carvalho Chehab 2020-05-02 7:41 ` Mike Rapoport 2020-05-15 18:01 ` Jonathan Corbet 0 siblings, 2 replies; 5+ messages in thread From: Mauro Carvalho Chehab @ 2020-05-01 15:37 UTC (permalink / raw) To: Linux Doc Mailing List Cc: Mauro Carvalho Chehab, linux-kernel, Jonathan Corbet, Marc Zyngier, Tony Luck, Fenghua Yu, David S. Miller, Jakub Kicinski, Harry Wei, Alex Shi, Tejun Heo, Alexandre Belloni, Bartlomiej Zolnierkiewicz, Guenter Roeck, Marcos Paulo de Souza, Zenghui Yu, Daniel Jordan, Mike Rapoport, Masahiro Yamada, Rob Herring, Greg Kroah-Hartman, linux-ia64, netdev There are 4 IRQ documentation files under Documentation/*.txt. Move them into a new directory (core-api/irq) and add a new index file for it. While here, use a title markup for the Debugging section of the irq-domain.rst file. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- Documentation/admin-guide/hw-vuln/l1tf.rst | 2 +- Documentation/admin-guide/kernel-per-CPU-kthreads.rst | 2 +- Documentation/core-api/index.rst | 1 + Documentation/{IRQ.txt => core-api/irq/concepts.rst} | 0 Documentation/core-api/irq/index.rst | 11 +++++++++++ .../irq/irq-affinity.rst} | 0 .../{IRQ-domain.txt => core-api/irq/irq-domain.rst} | 3 ++- .../irq/irqflags-tracing.rst} | 0 Documentation/ia64/irq-redir.rst | 2 +- Documentation/networking/scaling.rst | 4 ++-- Documentation/translations/zh_CN/IRQ.txt | 4 ++-- MAINTAINERS | 2 +- 12 files changed, 22 insertions(+), 9 deletions(-) rename Documentation/{IRQ.txt => core-api/irq/concepts.rst} (100%) create mode 100644 Documentation/core-api/irq/index.rst rename Documentation/{IRQ-affinity.txt => core-api/irq/irq-affinity.rst} (100%) rename Documentation/{IRQ-domain.txt => core-api/irq/irq-domain.rst} (99%) rename Documentation/{irqflags-tracing.txt => core-api/irq/irqflags-tracing.rst} (100%) diff --git a/Documentation/admin-guide/hw-vuln/l1tf.rst b/Documentation/admin-guide/hw-vuln/l1tf.rst index f83212fae4d5..3eeeb488d955 100644 --- a/Documentation/admin-guide/hw-vuln/l1tf.rst +++ b/Documentation/admin-guide/hw-vuln/l1tf.rst @@ -268,7 +268,7 @@ Guest mitigation mechanisms /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is available at: - https://www.kernel.org/doc/Documentation/IRQ-affinity.txt + https://www.kernel.org/doc/Documentation/core-api/irq/irq-affinity.rst .. _smt_control: diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst index 21818aca4708..dc36aeb65d0a 100644 --- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst +++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst @@ -10,7 +10,7 @@ them to a "housekeeping" CPU dedicated to such work. References ========== -- Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs. +- Documentation/core-api/irq/irq-affinity.rst: Binding interrupts to sets of CPUs. - Documentation/admin-guide/cgroup-v1: Using cgroups to bind tasks to sets of CPUs. diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index ab056b3626f4..49a885e83a55 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -52,6 +52,7 @@ How Linux keeps everything from happening at the same time. See atomic_ops refcount-vs-atomic + irq/index local_ops padata ../RCU/index diff --git a/Documentation/IRQ.txt b/Documentation/core-api/irq/concepts.rst similarity index 100% rename from Documentation/IRQ.txt rename to Documentation/core-api/irq/concepts.rst diff --git a/Documentation/core-api/irq/index.rst b/Documentation/core-api/irq/index.rst new file mode 100644 index 000000000000..0d65d11e5420 --- /dev/null +++ b/Documentation/core-api/irq/index.rst @@ -0,0 +1,11 @@ +==== +IRQs +==== + +.. toctree:: + :maxdepth: 1 + + concepts + irq-affinity + irq-domain + irqflags-tracing diff --git a/Documentation/IRQ-affinity.txt b/Documentation/core-api/irq/irq-affinity.rst similarity index 100% rename from Documentation/IRQ-affinity.txt rename to Documentation/core-api/irq/irq-affinity.rst diff --git a/Documentation/IRQ-domain.txt b/Documentation/core-api/irq/irq-domain.rst similarity index 99% rename from Documentation/IRQ-domain.txt rename to Documentation/core-api/irq/irq-domain.rst index 507775cce753..096db12f32d5 100644 --- a/Documentation/IRQ-domain.txt +++ b/Documentation/core-api/irq/irq-domain.rst @@ -263,7 +263,8 @@ needs to: Hierarchy irq_domain is in no way x86 specific, and is heavily used to support other architectures, such as ARM, ARM64 etc. -=== Debugging === +Debugging +========= Most of the internals of the IRQ subsystem are exposed in debugfs by turning CONFIG_GENERIC_IRQ_DEBUGFS on. diff --git a/Documentation/irqflags-tracing.txt b/Documentation/core-api/irq/irqflags-tracing.rst similarity index 100% rename from Documentation/irqflags-tracing.txt rename to Documentation/core-api/irq/irqflags-tracing.rst diff --git a/Documentation/ia64/irq-redir.rst b/Documentation/ia64/irq-redir.rst index 39bf94484a15..6bbbbe4f73ef 100644 --- a/Documentation/ia64/irq-redir.rst +++ b/Documentation/ia64/irq-redir.rst @@ -7,7 +7,7 @@ IRQ affinity on IA64 platforms By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be controlled. The behavior on IA64 platforms is slightly different from -that described in Documentation/IRQ-affinity.txt for i386 systems. +that described in Documentation/core-api/irq/irq-affinity.rst for i386 systems. Because of the usage of SAPIC mode and physical destination mode the IRQ target is one particular CPU and cannot be a mask of several diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst index f78d7bf27ff5..8f0347b9fb3d 100644 --- a/Documentation/networking/scaling.rst +++ b/Documentation/networking/scaling.rst @@ -81,7 +81,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default, an IRQ may be handled on any CPU. Because a non-negligible part of packet processing takes place in receive interrupt handling, it is advantageous to spread receive interrupts between CPUs. To manually adjust the IRQ -affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems +affinity of each interrupt see Documentation/core-api/irq/irq-affinity.rst. Some systems will be running irqbalance, a daemon that dynamically optimizes IRQ assignments and as a result may override any manual settings. @@ -160,7 +160,7 @@ can be configured for each receive queue using a sysfs file entry:: This file implements a bitmap of CPUs. RPS is disabled when it is zero (the default), in which case packets are processed on the interrupting -CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to +CPU. Documentation/core-api/irq/irq-affinity.rst explains how CPUs are assigned to the bitmap. diff --git a/Documentation/translations/zh_CN/IRQ.txt b/Documentation/translations/zh_CN/IRQ.txt index 956026d5cf82..9aec8dca4fcf 100644 --- a/Documentation/translations/zh_CN/IRQ.txt +++ b/Documentation/translations/zh_CN/IRQ.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/IRQ.txt +Chinese translated version of Documentation/core-api/irq/index.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -9,7 +9,7 @@ or if there is a problem with the translation. Maintainer: Eric W. Biederman <ebiederman@xmission.com> Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> --------------------------------------------------------------------- -Documentation/IRQ.txt 的中文翻译 +Documentation/core-api/irq/index.rst 的中文翻译 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 diff --git a/MAINTAINERS b/MAINTAINERS index a1d7af532950..6eb3d85a646f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8974,7 +8974,7 @@ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) M: Marc Zyngier <maz@kernel.org> S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core -F: Documentation/IRQ-domain.txt +F: Documentation/core-api/irq/irq-domain.rst F: include/linux/irqdomain.h F: kernel/irq/irqdomain.c F: kernel/irq/msi.c -- 2.25.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book 2020-05-01 15:37 ` [PATCH 07/14] docs: add IRQ documentation at the core-api book Mauro Carvalho Chehab @ 2020-05-02 7:41 ` Mike Rapoport 2020-05-02 10:16 ` Mauro Carvalho Chehab 2020-05-15 18:01 ` Jonathan Corbet 1 sibling, 1 reply; 5+ messages in thread From: Mike Rapoport @ 2020-05-02 7:41 UTC (permalink / raw) To: Mauro Carvalho Chehab Cc: Linux Doc Mailing List, linux-kernel, Jonathan Corbet, Marc Zyngier, Tony Luck, Fenghua Yu, David S. Miller, Jakub Kicinski, Harry Wei, Alex Shi, Tejun Heo, Alexandre Belloni, Bartlomiej Zolnierkiewicz, Guenter Roeck, Marcos Paulo de Souza, Zenghui Yu, Daniel Jordan, Masahiro Yamada, Rob Herring, Greg Kroah-Hartman, linux-ia64, netdev Hello Mauro, On Fri, May 01, 2020 at 05:37:51PM +0200, Mauro Carvalho Chehab wrote: > There are 4 IRQ documentation files under Documentation/*.txt. > > Move them into a new directory (core-api/irq) and add a new > index file for it. Just curious, why IRQ docs got their subdirectory and DMA didn't :) > While here, use a title markup for the Debugging section of the > irq-domain.rst file. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > --- > Documentation/admin-guide/hw-vuln/l1tf.rst | 2 +- > Documentation/admin-guide/kernel-per-CPU-kthreads.rst | 2 +- > Documentation/core-api/index.rst | 1 + > Documentation/{IRQ.txt => core-api/irq/concepts.rst} | 0 > Documentation/core-api/irq/index.rst | 11 +++++++++++ > .../irq/irq-affinity.rst} | 0 > .../{IRQ-domain.txt => core-api/irq/irq-domain.rst} | 3 ++- > .../irq/irqflags-tracing.rst} | 0 > Documentation/ia64/irq-redir.rst | 2 +- > Documentation/networking/scaling.rst | 4 ++-- > Documentation/translations/zh_CN/IRQ.txt | 4 ++-- > MAINTAINERS | 2 +- > 12 files changed, 22 insertions(+), 9 deletions(-) > rename Documentation/{IRQ.txt => core-api/irq/concepts.rst} (100%) > create mode 100644 Documentation/core-api/irq/index.rst > rename Documentation/{IRQ-affinity.txt => core-api/irq/irq-affinity.rst} (100%) > rename Documentation/{IRQ-domain.txt => core-api/irq/irq-domain.rst} (99%) > rename Documentation/{irqflags-tracing.txt => core-api/irq/irqflags-tracing.rst} (100%) > > diff --git a/Documentation/admin-guide/hw-vuln/l1tf.rst b/Documentation/admin-guide/hw-vuln/l1tf.rst > index f83212fae4d5..3eeeb488d955 100644 > --- a/Documentation/admin-guide/hw-vuln/l1tf.rst > +++ b/Documentation/admin-guide/hw-vuln/l1tf.rst > @@ -268,7 +268,7 @@ Guest mitigation mechanisms > /proc/irq/$NR/smp_affinity[_list] files. Limited documentation is > available at: > > - https://www.kernel.org/doc/Documentation/IRQ-affinity.txt > + https://www.kernel.org/doc/Documentation/core-api/irq/irq-affinity.rst > > .. _smt_control: > > diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst > index 21818aca4708..dc36aeb65d0a 100644 > --- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst > +++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst > @@ -10,7 +10,7 @@ them to a "housekeeping" CPU dedicated to such work. > References > ========== > > -- Documentation/IRQ-affinity.txt: Binding interrupts to sets of CPUs. > +- Documentation/core-api/irq/irq-affinity.rst: Binding interrupts to sets of CPUs. > > - Documentation/admin-guide/cgroup-v1: Using cgroups to bind tasks to sets of CPUs. > > diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst > index ab056b3626f4..49a885e83a55 100644 > --- a/Documentation/core-api/index.rst > +++ b/Documentation/core-api/index.rst > @@ -52,6 +52,7 @@ How Linux keeps everything from happening at the same time. See > > atomic_ops > refcount-vs-atomic > + irq/index > local_ops > padata > ../RCU/index > diff --git a/Documentation/IRQ.txt b/Documentation/core-api/irq/concepts.rst > similarity index 100% > rename from Documentation/IRQ.txt > rename to Documentation/core-api/irq/concepts.rst > diff --git a/Documentation/core-api/irq/index.rst b/Documentation/core-api/irq/index.rst > new file mode 100644 > index 000000000000..0d65d11e5420 > --- /dev/null > +++ b/Documentation/core-api/irq/index.rst > @@ -0,0 +1,11 @@ > +==== > +IRQs > +==== > + > +.. toctree:: > + :maxdepth: 1 > + > + concepts > + irq-affinity > + irq-domain > + irqflags-tracing > diff --git a/Documentation/IRQ-affinity.txt b/Documentation/core-api/irq/irq-affinity.rst > similarity index 100% > rename from Documentation/IRQ-affinity.txt > rename to Documentation/core-api/irq/irq-affinity.rst > diff --git a/Documentation/IRQ-domain.txt b/Documentation/core-api/irq/irq-domain.rst > similarity index 99% > rename from Documentation/IRQ-domain.txt > rename to Documentation/core-api/irq/irq-domain.rst > index 507775cce753..096db12f32d5 100644 > --- a/Documentation/IRQ-domain.txt > +++ b/Documentation/core-api/irq/irq-domain.rst > @@ -263,7 +263,8 @@ needs to: > Hierarchy irq_domain is in no way x86 specific, and is heavily used to > support other architectures, such as ARM, ARM64 etc. > > -=== Debugging === > +Debugging > +========= > > Most of the internals of the IRQ subsystem are exposed in debugfs by > turning CONFIG_GENERIC_IRQ_DEBUGFS on. > diff --git a/Documentation/irqflags-tracing.txt b/Documentation/core-api/irq/irqflags-tracing.rst > similarity index 100% > rename from Documentation/irqflags-tracing.txt > rename to Documentation/core-api/irq/irqflags-tracing.rst > diff --git a/Documentation/ia64/irq-redir.rst b/Documentation/ia64/irq-redir.rst > index 39bf94484a15..6bbbbe4f73ef 100644 > --- a/Documentation/ia64/irq-redir.rst > +++ b/Documentation/ia64/irq-redir.rst > @@ -7,7 +7,7 @@ IRQ affinity on IA64 platforms > > By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be > controlled. The behavior on IA64 platforms is slightly different from > -that described in Documentation/IRQ-affinity.txt for i386 systems. > +that described in Documentation/core-api/irq/irq-affinity.rst for i386 systems. > > Because of the usage of SAPIC mode and physical destination mode the > IRQ target is one particular CPU and cannot be a mask of several > diff --git a/Documentation/networking/scaling.rst b/Documentation/networking/scaling.rst > index f78d7bf27ff5..8f0347b9fb3d 100644 > --- a/Documentation/networking/scaling.rst > +++ b/Documentation/networking/scaling.rst > @@ -81,7 +81,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default, > an IRQ may be handled on any CPU. Because a non-negligible part of packet > processing takes place in receive interrupt handling, it is advantageous > to spread receive interrupts between CPUs. To manually adjust the IRQ > -affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems > +affinity of each interrupt see Documentation/core-api/irq/irq-affinity.rst. Some systems > will be running irqbalance, a daemon that dynamically optimizes IRQ > assignments and as a result may override any manual settings. > > @@ -160,7 +160,7 @@ can be configured for each receive queue using a sysfs file entry:: > > This file implements a bitmap of CPUs. RPS is disabled when it is zero > (the default), in which case packets are processed on the interrupting > -CPU. Documentation/IRQ-affinity.txt explains how CPUs are assigned to > +CPU. Documentation/core-api/irq/irq-affinity.rst explains how CPUs are assigned to > the bitmap. > > > diff --git a/Documentation/translations/zh_CN/IRQ.txt b/Documentation/translations/zh_CN/IRQ.txt > index 956026d5cf82..9aec8dca4fcf 100644 > --- a/Documentation/translations/zh_CN/IRQ.txt > +++ b/Documentation/translations/zh_CN/IRQ.txt > @@ -1,4 +1,4 @@ > -Chinese translated version of Documentation/IRQ.txt > +Chinese translated version of Documentation/core-api/irq/index.rst > > If you have any comment or update to the content, please contact the > original document maintainer directly. However, if you have a problem > @@ -9,7 +9,7 @@ or if there is a problem with the translation. > Maintainer: Eric W. Biederman <ebiederman@xmission.com> > Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> > --------------------------------------------------------------------- > -Documentation/IRQ.txt 的中文翻译 > +Documentation/core-api/irq/index.rst 的中文翻译 > > 如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 > 交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 > diff --git a/MAINTAINERS b/MAINTAINERS > index a1d7af532950..6eb3d85a646f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -8974,7 +8974,7 @@ IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) > M: Marc Zyngier <maz@kernel.org> > S: Maintained > T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core > -F: Documentation/IRQ-domain.txt > +F: Documentation/core-api/irq/irq-domain.rst > F: include/linux/irqdomain.h > F: kernel/irq/irqdomain.c > F: kernel/irq/msi.c > -- > 2.25.4 > -- Sincerely yours, Mike. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book 2020-05-02 7:41 ` Mike Rapoport @ 2020-05-02 10:16 ` Mauro Carvalho Chehab 2020-05-02 11:21 ` Mike Rapoport 0 siblings, 1 reply; 5+ messages in thread From: Mauro Carvalho Chehab @ 2020-05-02 10:16 UTC (permalink / raw) To: Mike Rapoport Cc: Linux Doc Mailing List, linux-kernel, Jonathan Corbet, Marc Zyngier, Tony Luck, Fenghua Yu, David S. Miller, Jakub Kicinski, Harry Wei, Alex Shi, Tejun Heo, Alexandre Belloni, Bartlomiej Zolnierkiewicz, Guenter Roeck, Marcos Paulo de Souza, Zenghui Yu, Daniel Jordan, Masahiro Yamada, Rob Herring, Greg Kroah-Hartman, linux-ia64, netdev Em Sat, 2 May 2020 10:41:33 +0300 Mike Rapoport <rppt@linux.ibm.com> escreveu: > Hello Mauro, > > On Fri, May 01, 2020 at 05:37:51PM +0200, Mauro Carvalho Chehab wrote: > > There are 4 IRQ documentation files under Documentation/*.txt. > > > > Move them into a new directory (core-api/irq) and add a new > > index file for it. > > Just curious, why IRQ docs got their subdirectory and DMA didn't :) Heh, you got me... :-) The rationale I used is that DMA fits nicely being close to other memory related documents. As those currently don't have a subdir, I opted to not create a DMA-specific dir. I admit that his is a weak reason. I wouldn't mind placing them on a separate subdir, if you think it would be worth. Thanks, Mauro ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book 2020-05-02 10:16 ` Mauro Carvalho Chehab @ 2020-05-02 11:21 ` Mike Rapoport 0 siblings, 0 replies; 5+ messages in thread From: Mike Rapoport @ 2020-05-02 11:21 UTC (permalink / raw) To: Mauro Carvalho Chehab Cc: Linux Doc Mailing List, linux-kernel, Jonathan Corbet, Marc Zyngier, Tony Luck, Fenghua Yu, David S. Miller, Jakub Kicinski, Harry Wei, Alex Shi, Tejun Heo, Alexandre Belloni, Bartlomiej Zolnierkiewicz, Guenter Roeck, Marcos Paulo de Souza, Zenghui Yu, Daniel Jordan, Masahiro Yamada, Rob Herring, Greg Kroah-Hartman, linux-ia64, netdev On Sat, May 02, 2020 at 12:16:41PM +0200, Mauro Carvalho Chehab wrote: > Em Sat, 2 May 2020 10:41:33 +0300 > Mike Rapoport <rppt@linux.ibm.com> escreveu: > > > Hello Mauro, > > > > On Fri, May 01, 2020 at 05:37:51PM +0200, Mauro Carvalho Chehab wrote: > > > There are 4 IRQ documentation files under Documentation/*.txt. > > > > > > Move them into a new directory (core-api/irq) and add a new > > > index file for it. > > > > Just curious, why IRQ docs got their subdirectory and DMA didn't :) > > Heh, you got me... :-) > > The rationale I used is that DMA fits nicely being close to other > memory related documents. As those currently don't have a subdir, > I opted to not create a DMA-specific dir. I admit that his is a > weak reason. I wouldn't mind placing them on a separate subdir, > if you think it would be worth. I'm Ok without a dir as well :) > Thanks, > Mauro -- Sincerely yours, Mike. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 07/14] docs: add IRQ documentation at the core-api book 2020-05-01 15:37 ` [PATCH 07/14] docs: add IRQ documentation at the core-api book Mauro Carvalho Chehab 2020-05-02 7:41 ` Mike Rapoport @ 2020-05-15 18:01 ` Jonathan Corbet 1 sibling, 0 replies; 5+ messages in thread From: Jonathan Corbet @ 2020-05-15 18:01 UTC (permalink / raw) To: Mauro Carvalho Chehab Cc: Linux Doc Mailing List, linux-kernel, Marc Zyngier, Tony Luck, Fenghua Yu, David S. Miller, Jakub Kicinski, Harry Wei, Alex Shi, Tejun Heo, Alexandre Belloni, Bartlomiej Zolnierkiewicz, Guenter Roeck, Marcos Paulo de Souza, Zenghui Yu, Daniel Jordan, Mike Rapoport, Masahiro Yamada, Rob Herring, Greg Kroah-Hartman, linux-ia64, netdev On Fri, 1 May 2020 17:37:51 +0200 Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote: > There are 4 IRQ documentation files under Documentation/*.txt. > > Move them into a new directory (core-api/irq) and add a new > index file for it. > > While here, use a title markup for the Debugging section of the > irq-domain.rst file. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Applied, thanks. jon ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-05-15 18:01 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <cover.1588345503.git.mchehab+huawei@kernel.org>
2020-05-01 15:37 ` [PATCH 07/14] docs: add IRQ documentation at the core-api book Mauro Carvalho Chehab
2020-05-02 7:41 ` Mike Rapoport
2020-05-02 10:16 ` Mauro Carvalho Chehab
2020-05-02 11:21 ` Mike Rapoport
2020-05-15 18:01 ` Jonathan Corbet
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).