From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
Jakub Kicinski <kuba@kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Michal Kubecek <mkubecek@suse.cz>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
David Jander <david@protonic.nl>,
kernel@pengutronix.de, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org, Russell King <linux@armlinux.org.uk>,
mkl@pengutronix.de, Marek Vasut <marex@denx.de>,
Christian Herber <christian.herber@nxp.com>
Subject: [PATCH net-next v3 2/2] net: phy: tja11xx: add SQI support
Date: Wed, 20 May 2020 08:29:15 +0200 [thread overview]
Message-ID: <20200520062915.29493-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20200520062915.29493-1-o.rempel@pengutronix.de>
This patch implements reading of the Signal Quality Index for better
cable/link troubleshooting.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/phy/nxp-tja11xx.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index 0d4f9067ca715..1e79c30ca81a5 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -53,6 +53,8 @@
#define MII_COMMSTAT 23
#define MII_COMMSTAT_LINK_UP BIT(15)
+#define MII_COMMSTAT_SQI_STATE GENMASK(7, 5)
+#define MII_COMMSTAT_SQI_MAX 7
#define MII_GENSTAT 24
#define MII_GENSTAT_PLL_LOCKED BIT(14)
@@ -329,6 +331,22 @@ static int tja11xx_read_status(struct phy_device *phydev)
return 0;
}
+static int tja11xx_get_sqi(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_COMMSTAT);
+ if (ret < 0)
+ return ret;
+
+ return FIELD_GET(MII_COMMSTAT_SQI_STATE, ret);
+}
+
+static int tja11xx_get_sqi_max(struct phy_device *phydev)
+{
+ return MII_COMMSTAT_SQI_MAX;
+}
+
static int tja11xx_get_sset_count(struct phy_device *phydev)
{
return ARRAY_SIZE(tja11xx_hw_stats);
@@ -683,6 +701,8 @@ static struct phy_driver tja11xx_driver[] = {
.config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
+ .get_sqi = tja11xx_get_sqi,
+ .get_sqi_max = tja11xx_get_sqi_max,
.suspend = genphy_suspend,
.resume = genphy_resume,
.set_loopback = genphy_loopback,
@@ -699,6 +719,8 @@ static struct phy_driver tja11xx_driver[] = {
.config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
+ .get_sqi = tja11xx_get_sqi,
+ .get_sqi_max = tja11xx_get_sqi_max,
.suspend = genphy_suspend,
.resume = genphy_resume,
.set_loopback = genphy_loopback,
@@ -715,6 +737,8 @@ static struct phy_driver tja11xx_driver[] = {
.config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
+ .get_sqi = tja11xx_get_sqi,
+ .get_sqi_max = tja11xx_get_sqi_max,
.match_phy_device = tja1102_p0_match_phy_device,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -736,6 +760,8 @@ static struct phy_driver tja11xx_driver[] = {
.config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
+ .get_sqi = tja11xx_get_sqi,
+ .get_sqi_max = tja11xx_get_sqi_max,
.match_phy_device = tja1102_p1_match_phy_device,
.suspend = genphy_suspend,
.resume = genphy_resume,
--
2.26.2
next prev parent reply other threads:[~2020-05-20 6:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-20 6:29 [PATCH net-next v3 0/2] provide KAPI for SQI Oleksij Rempel
2020-05-20 6:29 ` [PATCH net-next v3 1/2] ethtool: provide UAPI for PHY Signal Quality Index (SQI) Oleksij Rempel
2020-05-20 14:29 ` Andrew Lunn
2020-05-20 14:45 ` Michal Kubecek
2020-05-20 15:07 ` Oleksij Rempel
2020-05-20 15:23 ` Michal Kubecek
2020-05-20 15:30 ` Andrew Lunn
2020-05-20 17:39 ` Oleksij Rempel
2020-05-20 6:29 ` Oleksij Rempel [this message]
2020-05-20 14:29 ` [PATCH net-next v3 2/2] net: phy: tja11xx: add SQI support Andrew Lunn
2020-05-22 0:18 ` [PATCH net-next v3 0/2] provide KAPI for SQI David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200520062915.29493-3-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=christian.herber@nxp.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=david@protonic.nl \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=marex@denx.de \
--cc=mkl@pengutronix.de \
--cc=mkubecek@suse.cz \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).