[PATCH AUTOSEL 5.4 09/32] net: microchip: encx24j600: add missed kthread_stop

[PATCH AUTOSEL 5.4 09/32] net: microchip: encx24j600: add missed kthread_stop

[Sasha Levin]

From: Chuhong Yuan <hslester96@gmail.com>

[ Upstream commit ff8ce319e9c25e920d994cc35236f0bb32dfc8f3 ]

This driver calls kthread_run() in probe, but forgets to call
kthread_stop() in probe failure and remove.
Add the missed kthread_stop() to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/microchip/encx24j600.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/microchip/encx24j600.c b/drivers/net/ethernet/microchip/encx24j600.c
index 52c41d11f565..c3a6edc0ddf6 100644
--- a/drivers/net/ethernet/microchip/encx24j600.c
+++ b/drivers/net/ethernet/microchip/encx24j600.c
@@ -1070,7 +1070,7 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 	if (unlikely(ret)) {
 		netif_err(priv, probe, ndev, "Error %d initializing card encx24j600 card\n",
 			  ret);
-		goto out_free;
+		goto out_stop;
 	}
 
 	eidled = encx24j600_read_reg(priv, EIDLED);
@@ -1088,6 +1088,8 @@ static int encx24j600_spi_probe(struct spi_device *spi)
 
 out_unregister:
 	unregister_netdev(priv->ndev);
+out_stop:
+	kthread_stop(priv->kworker_task);
 out_free:
 	free_netdev(ndev);
 
@@ -1100,6 +1102,7 @@ static int encx24j600_spi_remove(struct spi_device *spi)
 	struct encx24j600_priv *priv = dev_get_drvdata(&spi->dev);
 
 	unregister_netdev(priv->ndev);
+	kthread_stop(priv->kworker_task);
 
 	free_netdev(priv->ndev);
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 21/32] net: freescale: select CONFIG_FIXED_PHY where needed

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 99352c79af3e5f2e4724abf37fa5a2a3299b1c81 ]

I ran into a randconfig build failure with CONFIG_FIXED_PHY=m
and CONFIG_GIANFAR=y:

x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier'

It seems the same thing can happen with dpaa and ucc_geth, so change
all three to do an explicit 'select FIXED_PHY'.

The fixed-phy driver actually has an alternative stub function that
theoretically allows building network drivers when fixed-phy is
disabled, but I don't see how that would help here, as the drivers
presumably would not work then.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/Kconfig      | 2 ++
 drivers/net/ethernet/freescale/dpaa/Kconfig | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 6a7e8993119f..941c7e667afc 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -77,6 +77,7 @@ config UCC_GETH
 	depends on QUICC_ENGINE
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	---help---
 	  This driver supports the Gigabit Ethernet mode of the QUICC Engine,
 	  which is available on some Freescale SOCs.
@@ -90,6 +91,7 @@ config GIANFAR
 	depends on HAS_DMA
 	select FSL_PQ_MDIO
 	select PHYLIB
+	select FIXED_PHY
 	select CRC32
 	---help---
 	  This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig
index 3b325733a4f8..0a54c7e0e4ae 100644
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
@@ -3,6 +3,7 @@ menuconfig FSL_DPAA_ETH
 	tristate "DPAA Ethernet"
 	depends on FSL_DPAA && FSL_FMAN
 	select PHYLIB
+	select FIXED_PHY
 	select FSL_FMAN_MAC
 	---help---
 	  Data Path Acceleration Architecture Ethernet driver,
-- 
2.25.1

[PATCH AUTOSEL 5.4 32/32] drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c

[Sasha Levin]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 95f59bf88bb75281cc626e283ecefdd5d5641427 ]

This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc5-next-20200514-syzkaller #0 Not tainted
-----------------------------
drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!!

Since rtnl lock is held, pass this cond in list_for_each_entry_rcu().

Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hamradio/bpqether.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index fbea6f232819..e2ad3c2e8df5 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -127,7 +127,8 @@ static inline struct net_device *bpq_get_ax25_dev(struct net_device *dev)
 {
 	struct bpqdev *bpq;
 
-	list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list) {
+	list_for_each_entry_rcu(bpq, &bpq_devices, bpq_list,
+				lockdep_rtnl_is_held()) {
 		if (bpq->ethdev == dev)
 			return bpq->axdev;
 	}
-- 
2.25.1