netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: davem@davemloft.net, andrew@lunn.ch, f.fainelli@gmail.com,
	hkallweit1@gmail.com, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com,
	allan.nielsen@microchip.com
Subject: Re: [PATCH net-next 3/4] net: phy: mscc-miim: improve waiting logic
Date: Tue, 26 May 2020 23:07:34 +0200	[thread overview]
Message-ID: <20200526210734.GI3972@piout.net> (raw)
In-Reply-To: <20200526162256.466885-4-antoine.tenart@bootlin.com>

On 26/05/2020 18:22:55+0200, Antoine Ténart wrote:
> The MSCC MIIM MDIO driver uses a waiting logic to wait for the MDIO bus
> to be ready to accept next commands. It does so by polling the BUSY
> status bit which indicates the MDIO bus has completed all pending
> operations. This can take time, and the controller supports writing the
> next command as soon as there are no pending commands (which happens
> while the MDIO bus is busy completing its current command).
> 
> This patch implements this improved logic by adding an helper to poll
> the PENDING status bit, and by adjusting where we should wait for the
> bus to not be busy or to not be pending.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  drivers/net/phy/mdio-mscc-miim.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/phy/mdio-mscc-miim.c b/drivers/net/phy/mdio-mscc-miim.c
> index 42119f661452..aed9afa1e8f1 100644
> --- a/drivers/net/phy/mdio-mscc-miim.c
> +++ b/drivers/net/phy/mdio-mscc-miim.c
> @@ -16,6 +16,7 @@
>  #include <linux/of_mdio.h>
>  
>  #define MSCC_MIIM_REG_STATUS		0x0
> +#define		MSCC_MIIM_STATUS_STAT_PENDING	BIT(2)
>  #define		MSCC_MIIM_STATUS_STAT_BUSY	BIT(3)
>  #define MSCC_MIIM_REG_CMD		0x8
>  #define		MSCC_MIIM_CMD_OPR_WRITE		BIT(1)
> @@ -47,13 +48,23 @@ static int mscc_miim_wait_ready(struct mii_bus *bus)
>  				  !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50, 10000);
>  }
>  
> +static int mscc_miim_wait_pending(struct mii_bus *bus)
> +{
> +	struct mscc_miim_dev *miim = bus->priv;
> +	u32 val;
> +
> +	return readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
> +				  !(val & MSCC_MIIM_STATUS_STAT_PENDING),
> +				  50, 10000);
> +}
> +
>  static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
>  {
>  	struct mscc_miim_dev *miim = bus->priv;
>  	u32 val;
>  	int ret;
>  
> -	ret = mscc_miim_wait_ready(bus);
> +	ret = mscc_miim_wait_pending(bus);
>  	if (ret)
>  		goto out;
>  
> @@ -82,7 +93,7 @@ static int mscc_miim_write(struct mii_bus *bus, int mii_id,
>  	struct mscc_miim_dev *miim = bus->priv;
>  	int ret;
>  
> -	ret = mscc_miim_wait_ready(bus);
> +	ret = mscc_miim_wait_pending(bus);
>  	if (ret < 0)
>  		goto out;
>  
> -- 
> 2.26.2
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

  reply	other threads:[~2020-05-26 21:07 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-26 16:22 [PATCH net-next 0/4] net: phy: mscc-miim: reduce waiting time between MDIO transactions Antoine Tenart
2020-05-26 16:22 ` [PATCH net-next 1/4] net: phy: mscc-miim: use more reasonable delays Antoine Tenart
2020-05-26 21:04   ` Alexandre Belloni
2020-05-26 21:19   ` Florian Fainelli
2020-05-26 16:22 ` [PATCH net-next 2/4] net: phy: mscc-miim: remove redundant timeout check Antoine Tenart
2020-05-26 21:04   ` Alexandre Belloni
2020-05-26 21:19   ` Florian Fainelli
2020-05-26 16:22 ` [PATCH net-next 3/4] net: phy: mscc-miim: improve waiting logic Antoine Tenart
2020-05-26 21:07   ` Alexandre Belloni [this message]
2020-05-26 21:21   ` Florian Fainelli
2020-05-26 16:22 ` [PATCH net-next 4/4] net: phy: mscc-miim: read poll when high resolution timers are disabled Antoine Tenart
2020-05-26 21:22   ` Florian Fainelli
2020-05-26 22:01     ` Andrew Lunn
2020-05-26 22:05       ` Florian Fainelli
2020-05-26 17:01 ` [PATCH net-next 0/4] net: phy: mscc-miim: reduce waiting time between MDIO transactions Andrew Lunn
2020-05-27  7:00   ` Antoine Tenart
2020-05-26 22:34 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200526210734.GI3972@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=allan.nielsen@microchip.com \
    --cc=andrew@lunn.ch \
    --cc=antoine.tenart@bootlin.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).