[PATCH net v2] tun: correct header offsets in napi frags mode

[PATCH net v2] tun: correct header offsets in napi frags mode

[Willem de Bruijn]

From: Willem de Bruijn <willemb@google.com>

Tun in IFF_NAPI_FRAGS mode calls napi_gro_frags. Unlike netif_rx and
netif_gro_receive, this expects skb->data to point to the mac layer.

But skb_probe_transport_header, __skb_get_hash_symmetric, and
xdp_do_generic in tun_get_user need skb->data to point to the network
header. Flow dissection also needs skb->protocol set, so
eth_type_trans has to be called.

Ensure the link layer header lies in linear as eth_type_trans pulls
ETH_HLEN. Then take the same code paths for frags as for not frags.
Push the link layer header back just before calling napi_gro_frags.

By pulling up to ETH_HLEN from frag0 into linear, this disables the
frag0 optimization in the special case when IFF_NAPI_FRAGS is used
with zero length iov[0] (and thus empty skb->linear).

Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Petar Penkov <ppenkov@google.com>
---
 drivers/net/tun.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 44889eba1dbc..b984733c6c31 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1871,8 +1871,11 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
 		skb->dev = tun->dev;
 		break;
 	case IFF_TAP:
-		if (!frags)
-			skb->protocol = eth_type_trans(skb, tun->dev);
+		if (frags && !pskb_may_pull(skb, ETH_HLEN)) {
+			err = -ENOMEM;
+			goto drop;
+		}
+		skb->protocol = eth_type_trans(skb, tun->dev);
 		break;
 	}
 
@@ -1929,9 +1932,12 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
 	}
 
 	if (frags) {
+		u32 headlen;
+
 		/* Exercise flow dissector code path. */
-		u32 headlen = eth_get_headlen(tun->dev, skb->data,
-					      skb_headlen(skb));
+		skb_push(skb, ETH_HLEN);
+		headlen = eth_get_headlen(tun->dev, skb->data,
+					  skb_headlen(skb));
 
 		if (unlikely(headlen > skb_headlen(skb))) {
 			this_cpu_inc(tun->pcpu_stats->rx_dropped);
-- 
2.27.0.rc2.251.g90737beb825-goog

Re: [PATCH net v2] tun: correct header offsets in napi frags mode

[David Miller]

From: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Date: Sat, 30 May 2020 15:41:31 -0400

> From: Willem de Bruijn <willemb@google.com>
> 
> Tun in IFF_NAPI_FRAGS mode calls napi_gro_frags. Unlike netif_rx and
> netif_gro_receive, this expects skb->data to point to the mac layer.
> 
> But skb_probe_transport_header, __skb_get_hash_symmetric, and
> xdp_do_generic in tun_get_user need skb->data to point to the network
> header. Flow dissection also needs skb->protocol set, so
> eth_type_trans has to be called.
> 
> Ensure the link layer header lies in linear as eth_type_trans pulls
> ETH_HLEN. Then take the same code paths for frags as for not frags.
> Push the link layer header back just before calling napi_gro_frags.
> 
> By pulling up to ETH_HLEN from frag0 into linear, this disables the
> frag0 optimization in the special case when IFF_NAPI_FRAGS is used
> with zero length iov[0] (and thus empty skb->linear).
> 
> Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
> Signed-off-by: Willem de Bruijn <willemb@google.com>
> Acked-by: Petar Penkov <ppenkov@google.com>

Applied and queued up for -stable, thank you.