[PATCH AUTOSEL 5.4 07/26] net sched: fix reporting the first-time use timestamp

[PATCH AUTOSEL 5.4 07/26] net sched: fix reporting the first-time use timestamp

[Sasha Levin]

From: Roman Mashak <mrv@mojatatu.com>

[ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]

When a new action is installed, firstuse field of 'tcf_t' is explicitly set
to 0. Value of zero means "new action, not yet used"; as a packet hits the
action, 'firstuse' is stamped with the current jiffies value.

tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.

Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/act_api.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/net/act_api.h b/include/net/act_api.h
index b18c699681ca..59d05feecfb8 100644
--- a/include/net/act_api.h
+++ b/include/net/act_api.h
@@ -69,7 +69,8 @@ static inline void tcf_tm_dump(struct tcf_t *dtm, const struct tcf_t *stm)
 {
 	dtm->install = jiffies_to_clock_t(jiffies - stm->install);
 	dtm->lastuse = jiffies_to_clock_t(jiffies - stm->lastuse);
-	dtm->firstuse = jiffies_to_clock_t(jiffies - stm->firstuse);
+	dtm->firstuse = stm->firstuse ?
+		jiffies_to_clock_t(jiffies - stm->firstuse) : 0;
 	dtm->expires = jiffies_to_clock_t(stm->expires);
 }
 
-- 
2.25.1

Re: [PATCH AUTOSEL 5.4 07/26] net sched: fix reporting the first-time use timestamp

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1180 bytes --]

Hi!

> From: Roman Mashak <mrv@mojatatu.com>
> 
> [ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]
> 
> When a new action is installed, firstuse field of 'tcf_t' is explicitly set
> to 0. Value of zero means "new action, not yet used"; as a packet hits the
> action, 'firstuse' is stamped with the current jiffies value.
> 
> tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.

> @@ -69,7 +69,8 @@ static inline void tcf_tm_dump(struct tcf_t *dtm, const struct tcf_t *stm)
>  {
>  	dtm->install = jiffies_to_clock_t(jiffies - stm->install);
>  	dtm->lastuse = jiffies_to_clock_t(jiffies - stm->lastuse);
> -	dtm->firstuse = jiffies_to_clock_t(jiffies - stm->firstuse);
> +	dtm->firstuse = stm->firstuse ?
> +		jiffies_to_clock_t(jiffies - stm->firstuse) : 0;
>  	dtm->expires = jiffies_to_clock_t(stm->expires);
>  }

Jiffies start at small negative value (and are expected to overflow
periodically). This code will not work correctly in that case.

Best regards,
								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCH AUTOSEL 5.4 09/26] net: bmac: Fix read of MAC address from ROM

[Sasha Levin]

From: Jeremy Kerr <jk@ozlabs.org>

[ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ]

In bmac_get_station_address, We're reading two bytes at a time from ROM,
but we do that six times, resulting in 12 bytes of read & writes. This
means we will write off the end of the six-byte destination buffer.

This change fixes the for-loop to only read/write six bytes.

Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reported-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reported-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/apple/bmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index a58185b1d8bf..3e3711b60d01 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1182,7 +1182,7 @@ bmac_get_station_address(struct net_device *dev, unsigned char *ea)
 	int i;
 	unsigned short data;
 
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < 3; i++)
 		{
 			reset_and_select_srom(dev);
 			data = read_srom(dev, i + EnetAddressOffset/2, SROMAddressBits);
-- 
2.25.1

[PATCH AUTOSEL 5.4 10/26] r8152: support additional Microsoft Surface Ethernet Adapter variant

[Sasha Levin]

From: Marc Payne <marc.payne@mdpsys.co.uk>

[ Upstream commit c27a204383616efba5a4194075e90819961ff66a ]

Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to
Ethernet and USB Adapter' and may be used as a component of other devices
in future. Tested and working with the r8152 driver.

Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend'
issue which this device will cause (personally confirmed).

Signed-off-by: Marc Payne <marc.payne@mdpsys.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_ether.c | 11 +++++++++--
 drivers/net/usb/r8152.c     |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index fe630438f67b..9bb37ac99a10 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -808,14 +808,21 @@ static const struct usb_device_id	products[] = {
 	.driver_info = 0,
 },
 
-/* Microsoft Surface 3 dock (based on Realtek RTL8153) */
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153) */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
 	.driver_info = 0,
 },
 
-	/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153B) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x0927, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
 {
 	USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 44ea5dcc43fd..cd1a07175e11 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -5837,6 +5837,7 @@ static const struct usb_device_id rtl8152_table[] = {
 	{REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6)},
+	{REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x304f)},
 	{REALTEK_USB_DEVICE(VENDOR_ID_LENOVO,  0x3062)},
-- 
2.25.1

[PATCH AUTOSEL 5.4 14/26] net: mvpp2: fix RX hashing for non-10G ports

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 3138a07ce219acde4c0d7ea0b6d54ba64153328b ]

When rxhash is enabled on any ethernet port except the first in each CP
block, traffic flow is prevented.  The analysis is below:

I've been investigating this afternoon, and what I've found, comparing
a kernel without 895586d5dc32 and with 895586d5dc32 applied is:

- The table programmed into the hardware via mvpp22_rss_fill_table()
  appears to be identical with or without the commit.

- When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports
  that c2.attr[0] and c2.attr[2] are written back containing:

   - with 895586d5dc32, failing:    00200000 40000000
   - without 895586d5dc32, working: 04000000 40000000

- When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as:

   04000000 00000000

The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the
first value is the queue number, which comprises two fields. The high
5 bits are 24:29 and the low three are 21:23 inclusive. This comes
from:

       c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) |
                     MVPP22_CLS_C2_ATTR0_QLOW(ql);

So, the working case gives eth2 a queue id of 4.0, or 32 as per
port->first_rxq, and the non-working case a queue id of 0.1, or 1.
The allocation of queue IDs seems to be in mvpp2_port_probe():

        if (priv->hw_version == MVPP21)
                port->first_rxq = port->id * port->nrxqs;
        else
                port->first_rxq = port->id * priv->max_port_rxqs;

Where:

        if (priv->hw_version == MVPP21)
                priv->max_port_rxqs = 8;
        else
                priv->max_port_rxqs = 32;

Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1
(eth2) be 32. It seems the idea is that the first 32 queues belong to
port 0, the second 32 queues belong to port 1, etc.

mvpp2_rss_port_c2_enable() gets the queue number from it's parameter,
'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns
port->rss_ctx[0].

mvpp22_rss_context_create() is responsible for allocating that, which
it does by looking for an unallocated priv->rss_tables[] pointer. This
table is shared amongst all ports on the CP silicon.

When we write the tables in mvpp22_rss_fill_table(), the RSS table
entry is defined by:

                u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) |
                          MVPP22_RSS_INDEX_TABLE_ENTRY(i);

where rss_ctx is the context ID (queue number) and i is the index in
the table.

If we look at what is written:

- The first table to be written has "sel" values of 00000000..0000001f,
  containing values 0..3. This appears to be for eth1. This is table 0,
  RX queue number 0.
- The second table has "sel" values of 00000100..0000011f, and appears
  to be for eth2.  These contain values 0x20..0x23. This is table 1,
  RX queue number 0.
- The third table has "sel" values of 00000200..0000021f, and appears
  to be for eth3.  These contain values 0x40..0x43. This is table 2,
  RX queue number 0.

How do queue numbers translate to the RSS table?  There is another
table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field
of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE
register. Before 895586d5dc32, it was:

       mvpp2_write(priv, MVPP22_RSS_INDEX,
                   MVPP22_RSS_INDEX_QUEUE(port->first_rxq));
       mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE,
                   MVPP22_RSS_TABLE_POINTER(port->id));

and after:

       mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx));
       mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx));

Before the commit, for eth2, that would've contained '32' for the
index and '1' for the table pointer - mapping queue 32 to table 1.
Remember that this is queue-high.queue-low of 4.0.

After the commit, we appear to map queue 1 to table 1. That again
looks fine on the face of it.

Section 9.3.1 of the A8040 manual seems indicate the reason that the
queue number is separated. queue-low seems to always come from the
classifier, whereas queue-high can be from the ingress physical port
number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG.

We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high
comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to
be where our bug comes from.

mvpp2_cls_oversize_rxq_set() sets this up as:

        mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id),
                    (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));

        val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
        val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
        mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);

Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high
for eth2 is _always_ 4, so only queues 32 through 39 inclusive are
available to eth2. Yet, we're trying to tell the classifier to set
queue-high, which will be ignored, to zero. Hence, the queue-high
field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be
ignored.

This means we end up directing traffic from eth2 not to queue 1, but
to queue 33, and then we tell it to look up queue 33 in the RSS table.
However, RSS table has not been programmed for queue 33, and so it ends
up (presumably) dropping the packets.

It seems that mvpp22_rss_context_create() doesn't take account of the
fact that the upper 5 bits of the queue ID can't actually be changed
due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that
mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either
way, these two functions mutually disagree with what queue number
should be used.

Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU
validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used
for over-sized packets attempting to egress through this port. With
the classifier having had RSS enabled and directing eth2 traffic to
queue 1, we may still have packets appearing on queue 32 for this port.

However, the only way we may end up with over-sized packets attempting
to egress through eth2 - is if the A8040 forwards frames between its
ports. From what I can see, we don't support that feature, and the
kernel restricts the egress packet size to the MTU. In any case, if we
were to attempt to transmit an oversized packet, we have no support in
the kernel to deal with that appearing in the port's receive queue.

So, this patch attempts to solve the issue by clearing the
MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH()
from the classifier to define the queue-high field of the queue number.

My testing seems to confirm my findings above - clearing this bit
means that if I enable rxhash on eth2, the interface can then pass
traffic, as we are now directing traffic to RX queue 1 rather than
queue 33. Traffic still seems to work with rxhash off as well.

Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
index 4344a59c823f..6122057d60c0 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
@@ -1070,7 +1070,7 @@ void mvpp2_cls_oversize_rxq_set(struct mvpp2_port *port)
 		    (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));
 
 	val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
-	val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
+	val &= ~MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
 	mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 15/26] net/ethernet/freescale: rework quiesce/activate for ucc_geth

[Sasha Levin]

From: Valentin Longchamp <valentin@longchamp.me>

[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]

ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.

The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].

A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.

The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.

[1] https://lists.openwall.net/netdev/2020/01/08/201

Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index f839fa94ebdd..d3b8ce734c1b 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -42,6 +42,7 @@
 #include <soc/fsl/qe/ucc.h>
 #include <soc/fsl/qe/ucc_fast.h>
 #include <asm/machdep.h>
+#include <net/sch_generic.h>
 
 #include "ucc_geth.h"
 
@@ -1548,11 +1549,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-	/* Prevent any further xmits, plus detach the device. */
-	netif_device_detach(ugeth->ndev);
-
-	/* Wait for any current xmits to finish. */
-	netif_tx_disable(ugeth->ndev);
+	/* Prevent any further xmits */
+	netif_tx_stop_all_queues(ugeth->ndev);
 
 	/* Disable the interrupt to avoid NAPI rescheduling. */
 	disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1565,7 +1563,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
 	napi_enable(&ugeth->napi);
 	enable_irq(ugeth->ug_info->uf_info.irq);
-	netif_device_attach(ugeth->ndev);
+
+	/* allow to xmit again  */
+	netif_tx_wake_all_queues(ugeth->ndev);
+	__netdev_watchdog_up(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made
-- 
2.25.1

[PATCH AUTOSEL 5.4 16/26] net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x

[Sasha Levin]

From: Jonathan McDowell <noodles@earth.li>

[ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ]

The ipq806x_gmac_probe() function enables the PTP clock but not the
appropriate interface clocks. This means that if the bootloader hasn't
done so attempting to bring up the interface will fail with an error
like:

[   59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma
[   59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[   59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed

This patch, a slightly cleaned up version of one posted by Sergey
Sergeev in:

https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257

correctly enables the clock; we have already configured the source just
before this.

Tested on a MikroTik RB3011.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 0d21082ceb93..4d75158c64b2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -318,6 +318,19 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 	/* Enable PTP clock */
 	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
 	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+				NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+	default:
+		/* We don't get here; the switch above will have errored out */
+		unreachable();
+	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
 
 	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
-- 
2.25.1

[PATCH AUTOSEL 5.4 18/26] net: sun: fix missing release regions in cas_init_one().

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit 5a730153984dd13f82ffae93d7170d76eba204e9 ]

In cas_init_one(), "pdev" is requested by "pci_request_regions", but it
was not released after a call of the function “pci_write_config_byte”
failed. Thus replace the jump target “err_write_cacheline” by
"err_out_free_res".

Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sun/cassini.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index c91876f8c536..6e78a33aa5e4 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -4971,7 +4971,7 @@ static int cas_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 					  cas_cacheline_size)) {
 			dev_err(&pdev->dev, "Could not set PCI cache "
 			       "line size\n");
-			goto err_write_cacheline;
+			goto err_out_free_res;
 		}
 	}
 #endif
@@ -5144,7 +5144,6 @@ err_out_iounmap:
 err_out_free_res:
 	pci_release_regions(pdev);
 
-err_write_cacheline:
 	/* Try to restore it in case the error occurred after we
 	 * set it.
 	 */
-- 
2.25.1

[PATCH AUTOSEL 5.4 19/26] net/mlx5: Add command entry handling completion

[Sasha Levin]

From: Moshe Shemesh <moshe@mellanox.com>

[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ]

When FW response to commands is very slow and all command entries in
use are waiting for completion we can have a race where commands can get
timeout before they get out of the queue and handled. Timeout
completion on uninitialized command will cause releasing command's
buffers before accessing it for initialization and then we will get NULL
pointer exception while trying access it. It may also cause releasing
buffers of another command since we may have timeout completion before
even allocating entry index for this command.
Add entry handling completion to avoid this race.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 14 ++++++++++++++
 include/linux/mlx5/driver.h                   |  1 +
 2 files changed, 15 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index 08048a2d7259..b6a3370068f1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -861,6 +861,7 @@ static void cmd_work_handler(struct work_struct *work)
 	int alloc_ret;
 	int cmd_mode;
 
+	complete(&ent->handling);
 	sem = ent->page_queue ? &cmd->pages_sem : &cmd->sem;
 	down(sem);
 	if (!ent->page_queue) {
@@ -978,6 +979,11 @@ static int wait_func(struct mlx5_core_dev *dev, struct mlx5_cmd_work_ent *ent)
 	struct mlx5_cmd *cmd = &dev->cmd;
 	int err;
 
+	if (!wait_for_completion_timeout(&ent->handling, timeout) &&
+	    cancel_work_sync(&ent->work)) {
+		ent->ret = -ECANCELED;
+		goto out_err;
+	}
 	if (cmd->mode == CMD_MODE_POLLING || ent->polling) {
 		wait_for_completion(&ent->done);
 	} else if (!wait_for_completion_timeout(&ent->done, timeout)) {
@@ -985,12 +991,17 @@ static int wait_func(struct mlx5_core_dev *dev, struct mlx5_cmd_work_ent *ent)
 		mlx5_cmd_comp_handler(dev, 1UL << ent->idx, true);
 	}
 
+out_err:
 	err = ent->ret;
 
 	if (err == -ETIMEDOUT) {
 		mlx5_core_warn(dev, "%s(0x%x) timeout. Will cause a leak of a command resource\n",
 			       mlx5_command_str(msg_to_opcode(ent->in)),
 			       msg_to_opcode(ent->in));
+	} else if (err == -ECANCELED) {
+		mlx5_core_warn(dev, "%s(0x%x) canceled on out of queue timeout.\n",
+			       mlx5_command_str(msg_to_opcode(ent->in)),
+			       msg_to_opcode(ent->in));
 	}
 	mlx5_core_dbg(dev, "err %d, delivery status %s(%d)\n",
 		      err, deliv_status_to_str(ent->status), ent->status);
@@ -1026,6 +1037,7 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in,
 	ent->token = token;
 	ent->polling = force_polling;
 
+	init_completion(&ent->handling);
 	if (!callback)
 		init_completion(&ent->done);
 
@@ -1045,6 +1057,8 @@ static int mlx5_cmd_invoke(struct mlx5_core_dev *dev, struct mlx5_cmd_msg *in,
 	err = wait_func(dev, ent);
 	if (err == -ETIMEDOUT)
 		goto out;
+	if (err == -ECANCELED)
+		goto out_free;
 
 	ds = ent->ts2 - ent->ts1;
 	op = MLX5_GET(mbox_in, in->first.data, opcode);
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 3e80f03a387f..897829651204 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -756,6 +756,7 @@ struct mlx5_cmd_work_ent {
 	struct delayed_work	cb_timeout_work;
 	void		       *context;
 	int			idx;
+	struct completion	handling;
 	struct completion	done;
 	struct mlx5_cmd        *cmd;
 	struct work_struct	work;
-- 
2.25.1

[PATCH AUTOSEL 5.4 20/26] net/mlx5e: Fix inner tirs handling

[Sasha Levin]

From: Roi Dayan <roid@mellanox.com>

[ Upstream commit a16b8e0dcf7043bee46174bed0553cc9e36b63a5 ]

In the cited commit inner_tirs argument was added to create and destroy
inner tirs, and no indication was added to mlx5e_modify_tirs_hash()
function. In order to have a consistent handling, use
inner_indir_tir[0].tirn in tirs destroy/modify function as an indication
to whether inner tirs are created.
Inner tirs are not created for representors and before this commit,
a call to mlx5e_modify_tirs_hash() was sending HW commands to
modify non-existent inner tirs.

Fixes: 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h         |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c    | 12 +++++++-----
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c     |  4 ++--
 .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c    |  4 ++--
 4 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index 38aa55638bbe..98304c42e495 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -1103,7 +1103,7 @@ void mlx5e_close_drop_rq(struct mlx5e_rq *drop_rq);
 int mlx5e_create_indirect_rqt(struct mlx5e_priv *priv);
 
 int mlx5e_create_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc);
-void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc);
+void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv);
 
 int mlx5e_create_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs);
 void mlx5e_destroy_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 0e340893ca00..c133beb6a7a5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2758,7 +2758,8 @@ void mlx5e_modify_tirs_hash(struct mlx5e_priv *priv, void *in, int inlen)
 		mlx5_core_modify_tir(mdev, priv->indir_tir[tt].tirn, in, inlen);
 	}
 
-	if (!mlx5e_tunnel_inner_ft_supported(priv->mdev))
+	/* Verify inner tirs resources allocated */
+	if (!priv->inner_indir_tir[0].tirn)
 		return;
 
 	for (tt = 0; tt < MLX5E_NUM_INDIR_TIRS; tt++) {
@@ -3405,14 +3406,15 @@ out:
 	return err;
 }
 
-void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc)
+void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv)
 {
 	int i;
 
 	for (i = 0; i < MLX5E_NUM_INDIR_TIRS; i++)
 		mlx5e_destroy_tir(priv->mdev, &priv->indir_tir[i]);
 
-	if (!inner_ttc || !mlx5e_tunnel_inner_ft_supported(priv->mdev))
+	/* Verify inner tirs resources allocated */
+	if (!priv->inner_indir_tir[0].tirn)
 		return;
 
 	for (i = 0; i < MLX5E_NUM_INDIR_TIRS; i++)
@@ -5119,7 +5121,7 @@ err_destroy_xsk_rqts:
 err_destroy_direct_tirs:
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
 err_destroy_indirect_tirs:
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 err_destroy_direct_rqts:
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 err_destroy_indirect_rqts:
@@ -5138,7 +5140,7 @@ static void mlx5e_cleanup_nic_rx(struct mlx5e_priv *priv)
 	mlx5e_destroy_direct_tirs(priv, priv->xsk_tir);
 	mlx5e_destroy_direct_rqts(priv, priv->xsk_tir);
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 	mlx5e_destroy_rqt(priv, &priv->indir_rqt);
 	mlx5e_close_drop_rq(&priv->drop_rq);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
index fddf644ba349..9b232ef36d53 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
@@ -1597,7 +1597,7 @@ err_destroy_ttc_table:
 err_destroy_direct_tirs:
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
 err_destroy_indirect_tirs:
-	mlx5e_destroy_indirect_tirs(priv, false);
+	mlx5e_destroy_indirect_tirs(priv);
 err_destroy_direct_rqts:
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 err_destroy_indirect_rqts:
@@ -1614,7 +1614,7 @@ static void mlx5e_cleanup_rep_rx(struct mlx5e_priv *priv)
 	mlx5_del_flow_rules(rpriv->vport_rx_rule);
 	mlx5e_destroy_ttc_table(priv, &priv->fs.ttc);
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
-	mlx5e_destroy_indirect_tirs(priv, false);
+	mlx5e_destroy_indirect_tirs(priv);
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 	mlx5e_destroy_rqt(priv, &priv->indir_rqt);
 	mlx5e_close_drop_rq(&priv->drop_rq);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
index 3ed8ab2d703d..0fed2419623d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c
@@ -396,7 +396,7 @@ static int mlx5i_init_rx(struct mlx5e_priv *priv)
 err_destroy_direct_tirs:
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
 err_destroy_indirect_tirs:
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 err_destroy_direct_rqts:
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 err_destroy_indirect_rqts:
@@ -412,7 +412,7 @@ static void mlx5i_cleanup_rx(struct mlx5e_priv *priv)
 {
 	mlx5i_destroy_flow_steering(priv);
 	mlx5e_destroy_direct_tirs(priv, priv->direct_tir);
-	mlx5e_destroy_indirect_tirs(priv, true);
+	mlx5e_destroy_indirect_tirs(priv);
 	mlx5e_destroy_direct_rqts(priv, priv->direct_tir);
 	mlx5e_destroy_rqt(priv, &priv->indir_rqt);
 	mlx5e_close_drop_rq(&priv->drop_rq);
-- 
2.25.1

[PATCH AUTOSEL 5.4 21/26] net/mlx5: Fix memory leak in mlx5_events_init

[Sasha Levin]

From: Moshe Shemesh <moshe@mellanox.com>

[ Upstream commit df14ad1eccb04a4a28c90389214dbacab085b244 ]

Fix memory leak in mlx5_events_init(), in case
create_single_thread_workqueue() fails, events
struct should be freed.

Fixes: 5d3c537f9070 ("net/mlx5: Handle event of power detection in the PCIE slot")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/events.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/events.c b/drivers/net/ethernet/mellanox/mlx5/core/events.c
index 8bcf3426b9c6..3ce17c3d7a00 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/events.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/events.c
@@ -346,8 +346,10 @@ int mlx5_events_init(struct mlx5_core_dev *dev)
 	events->dev = dev;
 	dev->priv.events = events;
 	events->wq = create_singlethread_workqueue("mlx5_events");
-	if (!events->wq)
+	if (!events->wq) {
+		kfree(events);
 		return -ENOMEM;
+	}
 	INIT_WORK(&events->pcie_core_work, mlx5_pcie_event);
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 5.4 22/26] net/mlx5e: Update netdev txq on completions during closure

[Sasha Levin]

From: Moshe Shemesh <moshe@mellanox.com>

[ Upstream commit 5e911e2c06bd8c17df29147a5e2d4b17fafda024 ]

On sq closure when we free its descriptors, we should also update netdev
txq on completions which would not arrive. Otherwise if we reopen sqs
and attach them back, for example on fw fatal recovery flow, we may get
tx timeout.

Fixes: 29429f3300a3 ("net/mlx5e: Timeout if SQ doesn't flush during close")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index dee12f17f9c2..d9e0fc146741 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -537,10 +537,9 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget)
 void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq)
 {
 	struct mlx5e_tx_wqe_info *wi;
+	u32 dma_fifo_cc, nbytes = 0;
+	u16 ci, sqcc, npkts = 0;
 	struct sk_buff *skb;
-	u32 dma_fifo_cc;
-	u16 sqcc;
-	u16 ci;
 	int i;
 
 	sqcc = sq->cc;
@@ -565,11 +564,15 @@ void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq)
 		}
 
 		dev_kfree_skb_any(skb);
+		npkts++;
+		nbytes += wi->num_bytes;
 		sqcc += wi->num_wqebbs;
 	}
 
 	sq->dma_fifo_cc = dma_fifo_cc;
 	sq->cc = sqcc;
+
+	netdev_tx_completed_queue(sq->txq, npkts, nbytes);
 }
 
 #ifdef CONFIG_MLX5_CORE_IPOIB
-- 
2.25.1

[PATCH AUTOSEL 5.4 23/26] net/mlx5: Fix error flow in case of function_setup failure

[Sasha Levin]

From: Shay Drory <shayd@mellanox.com>

[ Upstream commit 4f7400d5cbaef676e00cdffb0565bf731c6bb09e ]

Currently, if an error occurred during mlx5_function_setup(), we
keep dev->state as DEVICE_STATE_UP.
Fixing it by adding a goto label.

Fixes: e161105e58da ("net/mlx5: Function setup/teardown procedures")
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index c96a0e501007..7dcdda9ca351 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -1183,7 +1183,7 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, bool boot)
 
 	err = mlx5_function_setup(dev, boot);
 	if (err)
-		goto out;
+		goto err_function;
 
 	if (boot) {
 		err = mlx5_init_once(dev);
@@ -1229,6 +1229,7 @@ err_load:
 		mlx5_cleanup_once(dev);
 function_teardown:
 	mlx5_function_teardown(dev, boot);
+err_function:
 	dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR;
 	mutex_unlock(&dev->intf_state_mutex);
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 24/26] net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 4c64b83d03f4aafcdf710caad994cbc855802e74 ]

vlan_for_each() are required to be called with rtnl_lock taken, otherwise
ASSERT_RTNL() warning will be triggered - which happens now during System
resume from suspend:
  cpsw_suspend()
  |- cpsw_ndo_stop()
    |- __hw_addr_ref_unsync_dev()
      |- cpsw_purge_all_mc()
         |- vlan_for_each()
            |- ASSERT_RTNL();

Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls.

Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d7a953c647b4..39df8c8feb6c 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2999,11 +2999,15 @@ static int cpsw_suspend(struct device *dev)
 	struct cpsw_common *cpsw = dev_get_drvdata(dev);
 	int i;
 
+	rtnl_lock();
+
 	for (i = 0; i < cpsw->data.slaves; i++)
 		if (cpsw->slaves[i].ndev)
 			if (netif_running(cpsw->slaves[i].ndev))
 				cpsw_ndo_stop(cpsw->slaves[i].ndev);
 
+	rtnl_unlock();
+
 	/* Select sleep pin state */
 	pinctrl_pm_select_sleep_state(dev);
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 25/26] net/mlx4_core: fix a memory leak bug.

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit febfd9d3c7f74063e8e630b15413ca91b567f963 ]

In function mlx4_opreq_action(), pointer "mailbox" is not released,
when mlx4_cmd_box() return and error, causing a memory leak bug.
Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can
free this pointer.

Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx4/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 6e501af0e532..f6ff9620a137 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -2734,7 +2734,7 @@ void mlx4_opreq_action(struct work_struct *work)
 		if (err) {
 			mlx4_err(dev, "Failed to retrieve required operation: %d\n",
 				 err);
-			return;
+			goto out;
 		}
 		MLX4_GET(modifier, outbox, GET_OP_REQ_MODIFIER_OFFSET);
 		MLX4_GET(token, outbox, GET_OP_REQ_TOKEN_OFFSET);
-- 
2.25.1

[PATCH AUTOSEL 5.4 26/26] net: smsc911x: Fix runtime PM imbalance on error

[Sasha Levin]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 539d39ad0c61b35f69565a037d7586deaf6d6166 ]

Remove runtime PM usage counter decrement when the
increment function has not been called to keep the
counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/smsc/smsc911x.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 38068fc34141..c7bdada4d1b9 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2502,20 +2502,20 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 
 	retval = smsc911x_init(dev);
 	if (retval < 0)
-		goto out_disable_resources;
+		goto out_init_fail;
 
 	netif_carrier_off(dev);
 
 	retval = smsc911x_mii_init(pdev, dev);
 	if (retval) {
 		SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
-		goto out_disable_resources;
+		goto out_init_fail;
 	}
 
 	retval = register_netdev(dev);
 	if (retval) {
 		SMSC_WARN(pdata, probe, "Error %i registering device", retval);
-		goto out_disable_resources;
+		goto out_init_fail;
 	} else {
 		SMSC_TRACE(pdata, probe,
 			   "Network interface: \"%s\"", dev->name);
@@ -2556,9 +2556,10 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_disable_resources:
+out_init_fail:
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+out_disable_resources:
 	(void)smsc911x_disable_resources(pdev);
 out_enable_resources_fail:
 	smsc911x_free_resources(pdev);
-- 
2.25.1