[RFC 3/8] docs: networking: move baycom to the hw driver section

[Jakub Kicinski <kuba@kernel.org>]

Move baycom to hamradio.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
--
CC: t.sailer@alumni.ethz.ch
---
 .../networking/{ => device_drivers/hamradio}/baycom.rst   | 0
 .../networking/device_drivers/hamradio/index.rst          | 1 +
 Documentation/networking/index.rst                        | 1 -
 drivers/net/hamradio/Kconfig                              | 8 ++++----
 4 files changed, 5 insertions(+), 5 deletions(-)
 rename Documentation/networking/{ => device_drivers/hamradio}/baycom.rst (100%)

diff --git a/Documentation/networking/baycom.rst b/Documentation/networking/device_drivers/hamradio/baycom.rst
similarity index 100%
rename from Documentation/networking/baycom.rst
rename to Documentation/networking/device_drivers/hamradio/baycom.rst
diff --git a/Documentation/networking/device_drivers/hamradio/index.rst b/Documentation/networking/device_drivers/hamradio/index.rst
index df03a5acbfa7..7e731732057b 100644
--- a/Documentation/networking/device_drivers/hamradio/index.rst
+++ b/Documentation/networking/device_drivers/hamradio/index.rst
@@ -8,6 +8,7 @@ Amateur Radio Device Drivers
 .. toctree::
    :maxdepth: 2
 
+   baycom
    z8530drv
 
 .. only::  subproject and html
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 718e04e3f7ed..76831e9d7c9a 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -43,7 +43,6 @@ Linux Networking Documentation
    arcnet
    atm
    ax25
-   baycom
    bonding
    cdc_mbim
    cops
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 6aaca62940d0..8e63afc8a2e6 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -129,7 +129,7 @@ config BAYCOM_SER_FDX
 	  your serial interface chip. To configure the driver, use the sethdlc
 	  utility available in the standard ax25 utilities package. For
 	  information on the modems, see <http://www.baycom.de/> and
-	  <file:Documentation/networking/baycom.rst>.
+	  <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_ser_fdx.  This is recommended.
@@ -147,7 +147,7 @@ config BAYCOM_SER_HDX
 	  the driver, use the sethdlc utility available in the standard ax25
 	  utilities package. For information on the modems, see
 	  <http://www.baycom.de/> and
-	  <file:Documentation/networking/baycom.rst>.
+	  <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_ser_hdx.  This is recommended.
@@ -162,7 +162,7 @@ config BAYCOM_PAR
 	  par96 designs. To configure the driver, use the sethdlc utility
 	  available in the standard ax25 utilities package. For information on
 	  the modems, see <http://www.baycom.de/> and the file
-	  <file:Documentation/networking/baycom.rst>.
+	  <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_par.  This is recommended.
@@ -177,7 +177,7 @@ config BAYCOM_EPP
 	  designs. To configure the driver, use the sethdlc utility available
 	  in the standard ax25 utilities package. For information on the
 	  modems, see <http://www.baycom.de/> and the file
-	  <file:Documentation/networking/baycom.rst>.
+	  <file:Documentation/networking/device_drivers/hamradio/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_epp.  This is recommended.
-- 
2.26.2