From: Dan Murphy <dmurphy@ti.com>
To: <andrew@lunn.ch>, <f.fainelli@gmail.com>, <hkallweit1@gmail.com>,
<davem@davemloft.net>, <robh@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH net-next v7 2/6] net: phy: Add a helper to return the index for of the internal delay
Date: Wed, 17 Jun 2020 13:20:15 -0500 [thread overview]
Message-ID: <20200617182019.6790-3-dmurphy@ti.com> (raw)
In-Reply-To: <20200617182019.6790-1-dmurphy@ti.com>
Add a helper function that will return the index in the array for the
passed in internal delay value. The helper requires the array, size and
delay value.
The helper will then return the index for the exact match or return the
index for the index to the closest smaller value.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
drivers/net/phy/phy_device.c | 68 ++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 4 +++
2 files changed, 72 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 04946de74fa0..611d4e68e3c6 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -31,6 +31,7 @@
#include <linux/mdio.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/property.h>
MODULE_DESCRIPTION("PHY library");
MODULE_AUTHOR("Andy Fleming");
@@ -2657,6 +2658,73 @@ void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause)
}
EXPORT_SYMBOL(phy_get_pause);
+/**
+ * phy_get_delay_index - returns the index of the internal delay
+ * @phydev: phy_device struct
+ * @dev: pointer to the devices device struct
+ * @delay_values: array of delays the PHY supports
+ * @size: the size of the delay array
+ * @is_rx: boolean to indicate to get the rx internal delay
+ *
+ * Returns the index within the array of internal delay passed in.
+ * Or if size == 0 then the delay read from the firmware is returned.
+ * The array must be in ascending order.
+ * Return errno if the delay is invalid or cannot be found.
+ */
+s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
+ const int *delay_values, int size, bool is_rx)
+{
+ int ret;
+ int i;
+ s32 delay;
+
+ if (is_rx)
+ ret = device_property_read_u32(dev, "rx-internal-delay-ps",
+ &delay);
+ else
+ ret = device_property_read_u32(dev, "tx-internal-delay-ps",
+ &delay);
+ if (ret) {
+ phydev_err(phydev, "internal delay not defined\n");
+ return -EINVAL;
+ }
+
+ if (delay < 0)
+ return -EINVAL;
+
+ if (size <= 0)
+ return delay;
+
+ if (delay < delay_values[0] || delay > delay_values[size - 1]) {
+ phydev_err(phydev, "Delay %d is out of range\n", delay);
+ return -EINVAL;
+ }
+
+ if (delay == delay_values[0])
+ return 0;
+
+ for (i = 1; i < size; i++) {
+ if (delay == delay_values[i])
+ return i;
+
+ /* Find an approximate index by looking up the table */
+ if (delay > delay_values[i - 1] &&
+ delay < delay_values[i]) {
+ if (delay - delay_values[i - 1] <
+ delay_values[i] - delay)
+ return i - 1;
+ else
+ return i;
+ }
+ }
+
+ phydev_err(phydev, "error finding internal delay index for %d\n",
+ delay);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(phy_get_internal_delay);
+
static bool phy_drv_supports_irq(struct phy_driver *phydrv)
{
return phydrv->config_intr && phydrv->ack_interrupt;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8c05d0fb5c00..917bfd422e06 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1430,6 +1430,10 @@ void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
bool phy_validate_pause(struct phy_device *phydev,
struct ethtool_pauseparam *pp);
void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause);
+
+s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
+ const int *delay_values, int size, bool is_rx);
+
void phy_resolve_pause(unsigned long *local_adv, unsigned long *partner_adv,
bool *tx_pause, bool *rx_pause);
--
2.26.2
next prev parent reply other threads:[~2020-06-17 18:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-17 18:20 [PATCH net-next v7 0/6] RGMII Internal delay common property Dan Murphy
2020-06-17 18:20 ` [PATCH net-next v7 1/6] dt-bindings: net: Add tx and rx internal delays Dan Murphy
2020-06-18 1:43 ` Andrew Lunn
2020-06-18 2:01 ` Andrew Lunn
2020-06-18 13:44 ` Dan Murphy
2020-06-17 18:20 ` Dan Murphy [this message]
2020-06-18 1:51 ` [PATCH net-next v7 2/6] net: phy: Add a helper to return the index for of the internal delay Andrew Lunn
2020-06-18 13:41 ` Dan Murphy
2020-06-17 18:20 ` [PATCH net-next v7 3/6] dt-bindings: net: Add RGMII internal delay for DP83869 Dan Murphy
2020-06-17 18:20 ` [PATCH net-next v7 4/6] net: dp83869: Add RGMII internal delay configuration Dan Murphy
2020-06-17 18:20 ` [PATCH net-next v7 5/6] dt-bindings: net: dp83822: Add TI dp83822 phy Dan Murphy
2020-07-09 20:30 ` Rob Herring
2020-06-17 18:20 ` [PATCH net-next v7 6/6] net: phy: DP83822: Add ability to advertise Fiber connection Dan Murphy
2020-06-17 18:27 ` Dan Murphy
2020-06-18 0:00 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200617182019.6790-3-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).