Re: [PATCH net-next 4/5] net: phy: add Lynx PCS MDIO module

[Andrew Lunn <andrew@lunn.ch>]

>  MAINTAINERS                     |   7 +
>  drivers/net/phy/Kconfig         |   6 +
>  drivers/net/phy/Makefile        |   1 +
>  drivers/net/phy/mdio-lynx-pcs.c | 358 ++++++++++++++++++++++++++++++++
>  include/linux/mdio-lynx-pcs.h   |  43 ++++
>  5 files changed, 415 insertions(+)
>  create mode 100644 drivers/net/phy/mdio-lynx-pcs.c
>  create mode 100644 include/linux/mdio-lynx-pcs.h

Hi Ioana

We should think about naming convention here.

All MDIO bus driver, MDIO multiplexors etc use mdio- as a prefix.

This is not a bus driver, so i don't think it should use the mdio-
prefix. How about pcs-lynx.c?

In terms of Kconfig, MDIO_ prefix is used for MDIO bus drivers etc.  I
don't think it is appropriate here. How about PCS_LYNX? I don't think
any other subsystem is using PCS_ as a prefix.

> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -235,6 +235,12 @@ config MDIO_XPCS
>  	  This module provides helper functions for Synopsys DesignWare XPCS
>  	  controllers.
>  
> +config MDIO_LYNX_PCS
> +	bool
> +	help
> +	  This module provides helper functions for Lynx PCS enablement
> +	  representing the PCS as an MDIO device.
> +
>  endif
>  endif

Maybe add this at the end, and add a

comment "PCS device drivers"

before it? I'm assuming with time we will have more of these drivers.

       Andrew