Netdev List
 help / color / mirror / Atom feed
From: Vishal Kulkarni <vishal@chelsio.com>
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: nirranjan@chelsio.com, rahul.lakkireddy@chelsio.com,
	Vishal Kulkarni <vishal@chelsio.com>
Subject: [PATCH net-next 4/5] cxgb4: add support to fetch ethtool n-tuple filters
Date: Fri, 19 Jun 2020 19:51:38 +0530	[thread overview]
Message-ID: <20200619142139.27982-5-vishal@chelsio.com> (raw)
In-Reply-To: <20200619142139.27982-1-vishal@chelsio.com>

Add support to fetch the requested ethtool n-tuple filters by
translating them from hardware spec to ethtool n-tuple spec.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
---
 .../ethernet/chelsio/cxgb4/cxgb4_ethtool.c    | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 5c588677877d..3dd28e5856ba 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1589,10 +1589,104 @@ static struct filter_entry *cxgb4_get_filter_entry(struct adapter *adap,
 	return f;
 }
 
+static void cxgb4_fill_filter_rule(struct ethtool_rx_flow_spec *fs,
+				   struct ch_filter_specification *dfs)
+{
+	switch (dfs->val.proto) {
+	case IPPROTO_TCP:
+		if (dfs->type)
+			fs->flow_type = TCP_V6_FLOW;
+		else
+			fs->flow_type = TCP_V4_FLOW;
+		break;
+	case IPPROTO_UDP:
+		if (dfs->type)
+			fs->flow_type = UDP_V6_FLOW;
+		else
+			fs->flow_type = UDP_V4_FLOW;
+		break;
+	}
+
+	if (dfs->type) {
+		fs->h_u.tcp_ip6_spec.psrc = cpu_to_be16(dfs->val.fport);
+		fs->m_u.tcp_ip6_spec.psrc = cpu_to_be16(dfs->mask.fport);
+		fs->h_u.tcp_ip6_spec.pdst = cpu_to_be16(dfs->val.lport);
+		fs->m_u.tcp_ip6_spec.pdst = cpu_to_be16(dfs->mask.lport);
+		memcpy(&fs->h_u.tcp_ip6_spec.ip6src, &dfs->val.fip[0],
+		       sizeof(fs->h_u.tcp_ip6_spec.ip6src));
+		memcpy(&fs->m_u.tcp_ip6_spec.ip6src, &dfs->mask.fip[0],
+		       sizeof(fs->m_u.tcp_ip6_spec.ip6src));
+		memcpy(&fs->h_u.tcp_ip6_spec.ip6dst, &dfs->val.lip[0],
+		       sizeof(fs->h_u.tcp_ip6_spec.ip6dst));
+		memcpy(&fs->m_u.tcp_ip6_spec.ip6dst, &dfs->mask.lip[0],
+		       sizeof(fs->m_u.tcp_ip6_spec.ip6dst));
+		fs->h_u.tcp_ip6_spec.tclass = dfs->val.tos;
+		fs->m_u.tcp_ip6_spec.tclass = dfs->mask.tos;
+	} else {
+		fs->h_u.tcp_ip4_spec.psrc = cpu_to_be16(dfs->val.fport);
+		fs->m_u.tcp_ip4_spec.psrc = cpu_to_be16(dfs->mask.fport);
+		fs->h_u.tcp_ip4_spec.pdst = cpu_to_be16(dfs->val.lport);
+		fs->m_u.tcp_ip4_spec.pdst = cpu_to_be16(dfs->mask.lport);
+		memcpy(&fs->h_u.tcp_ip4_spec.ip4src, &dfs->val.fip[0],
+		       sizeof(fs->h_u.tcp_ip4_spec.ip4src));
+		memcpy(&fs->m_u.tcp_ip4_spec.ip4src, &dfs->mask.fip[0],
+		       sizeof(fs->m_u.tcp_ip4_spec.ip4src));
+		memcpy(&fs->h_u.tcp_ip4_spec.ip4dst, &dfs->val.lip[0],
+		       sizeof(fs->h_u.tcp_ip4_spec.ip4dst));
+		memcpy(&fs->m_u.tcp_ip4_spec.ip4dst, &dfs->mask.lip[0],
+		       sizeof(fs->m_u.tcp_ip4_spec.ip4dst));
+		fs->h_u.tcp_ip4_spec.tos = dfs->val.tos;
+		fs->m_u.tcp_ip4_spec.tos = dfs->mask.tos;
+	}
+	fs->h_ext.vlan_tci = cpu_to_be16(dfs->val.ivlan);
+	fs->m_ext.vlan_tci = cpu_to_be16(dfs->mask.ivlan);
+	fs->flow_type |= FLOW_EXT;
+
+	if (dfs->action == FILTER_DROP)
+		fs->ring_cookie = RX_CLS_FLOW_DISC;
+	else
+		fs->ring_cookie = dfs->iq;
+}
+
+static int cxgb4_ntuple_get_filter(struct net_device *dev,
+				   struct ethtool_rxnfc *cmd,
+				   unsigned int loc)
+{
+	const struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = netdev2adap(dev);
+	struct filter_entry *f;
+	int ftid;
+
+	if (!(adap->flags & CXGB4_FULL_INIT_DONE))
+		return -EAGAIN;
+
+	/* Check for maximum filter range */
+	if (!adap->ethtool_filters)
+		return -EOPNOTSUPP;
+
+	if (loc >= adap->ethtool_filters->nentries)
+		return -ERANGE;
+
+	if (!test_bit(loc, adap->ethtool_filters->port[pi->port_id].bmap))
+		return -ENOENT;
+
+	ftid = adap->ethtool_filters->port[pi->port_id].loc_array[loc];
+
+	/* Fetch filter_entry */
+	f = cxgb4_get_filter_entry(adap, ftid);
+
+	cxgb4_fill_filter_rule(&cmd->fs, &f->fs);
+
+	return 0;
+}
+
 static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
 		     u32 *rules)
 {
 	const struct port_info *pi = netdev_priv(dev);
+	struct adapter *adap = netdev2adap(dev);
+	unsigned int count = 0, index = 0;
+	int ret = 0;
 
 	switch (info->cmd) {
 	case ETHTOOL_GRXFH: {
@@ -1648,7 +1742,23 @@ static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
 	case ETHTOOL_GRXRINGS:
 		info->data = pi->nqsets;
 		return 0;
+	case ETHTOOL_GRXCLSRLCNT:
+		info->rule_cnt =
+		       adap->ethtool_filters->port[pi->port_id].in_use;
+		return 0;
+	case ETHTOOL_GRXCLSRULE:
+		return cxgb4_ntuple_get_filter(dev, info, info->fs.location);
+	case ETHTOOL_GRXCLSRLALL:
+		info->data = adap->ethtool_filters->nentries;
+		while (count < info->rule_cnt) {
+			ret = cxgb4_ntuple_get_filter(dev, info, index);
+			if (!ret)
+				rules[count++] = index;
+			index++;
+		}
+		return 0;
 	}
+
 	return -EOPNOTSUPP;
 }
 
-- 
2.21.1


  parent reply	other threads:[~2020-06-19 14:22 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-19 14:21 [PATCH net-next 0/5] cxgb4: add support for ethtool n-tuple filters Vishal Kulkarni
2020-06-19 14:21 ` [PATCH net-next 1/5] cxgb4: add skeleton " Vishal Kulkarni
2020-06-19 14:21 ` [PATCH net-next 2/5] cxgb4: add ethtool n-tuple filter insertion Vishal Kulkarni
2020-06-19 14:21 ` [PATCH net-next 3/5] cxgb4: add ethtool n-tuple filter deletion Vishal Kulkarni
2020-06-19 14:21 ` Vishal Kulkarni [this message]
2020-06-19 14:21 ` [PATCH net-next 5/5] cxgb4: add action to steer flows to specific Rxq Vishal Kulkarni
2020-06-19 20:17 ` [PATCH net-next 0/5] cxgb4: add support for ethtool n-tuple filters David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200619142139.27982-5-vishal@chelsio.com \
    --to=vishal@chelsio.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=nirranjan@chelsio.com \
    --cc=rahul.lakkireddy@chelsio.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox