[PATCH 2/2] net: phy: call phy_disable_interrupts() in phy_init_hw()

[Jisheng Zhang <Jisheng.Zhang@synaptics.com>]

Call phy_disable_interrupts() in phy_init_hw() to "have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state." as Pointed
out by Heiner.

Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
 drivers/net/phy/phy_device.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 04946de74fa0..f17d397ba689 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1090,10 +1090,13 @@ int phy_init_hw(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	if (phydev->drv->config_init)
+	if (phydev->drv->config_init) {
 		ret = phydev->drv->config_init(phydev);
+		if (ret < 0)
+			return ret;
+	}
 
-	return ret;
+	return phy_disable_interrupts(phydev);
 }
 EXPORT_SYMBOL(phy_init_hw);
 
-- 
2.27.0