[PATCH net-next 0/7] PHYLINK integration improvements for Felix DSA driver

[Vladimir Oltean <olteanv@gmail.com>]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

This is an overhaul of the Felix switch driver's PHYLINK operations.
Some of the patches (7/7) were done at the request of Russell King
(https://patchwork.kernel.org/cover/11386917/), while others are simply
cleanup. There is also one new feature being added: half-duplex for
10/100/1000 link speeds (2/7).

Vladimir Oltean (7):
  net: dsa: felix: stop writing to read-only fields in MII_BMCR
  net: dsa: felix: support half-duplex link modes
  net: dsa: felix: unconditionally configure MAC speed to 1000Mbps
  net: dsa: felix: set proper pause frame timers based on link speed
  net: dsa: felix: delete .phylink_mac_an_restart code
  net: dsa: felix: disable in-band AN in MII_BMCR without reset
  net: dsa: felix: use resolved link config in mac_link_up()

 drivers/net/dsa/ocelot/felix.c         | 108 +++++----
 drivers/net/dsa/ocelot/felix.h         |  11 +-
 drivers/net/dsa/ocelot/felix_vsc9959.c | 298 ++++++++++++-------------
 include/linux/fsl/enetc_mdio.h         |   1 +
 4 files changed, 213 insertions(+), 205 deletions(-)

-- 
2.25.1