[PATCH net-next] net: dsa: loop: Print when registration is successful

[Florian Fainelli <f.fainelli@gmail.com>]

We have a number of error conditions that can lead to the driver not
probing successfully, move the print when we are sure
dsa_register_switch() has suceeded. This avoids repeated prints in case
of probe deferral for instance.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/dsa_loop.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index 400207c5c7de..f8bc85a6e670 100644
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -280,13 +280,11 @@ static int dsa_loop_drv_probe(struct mdio_device *mdiodev)
 	struct dsa_loop_pdata *pdata = mdiodev->dev.platform_data;
 	struct dsa_loop_priv *ps;
 	struct dsa_switch *ds;
+	int ret;
 
 	if (!pdata)
 		return -ENODEV;
 
-	dev_info(&mdiodev->dev, "%s: 0x%0x\n",
-		 pdata->name, pdata->enabled_ports);
-
 	ds = devm_kzalloc(&mdiodev->dev, sizeof(*ds), GFP_KERNEL);
 	if (!ds)
 		return -ENOMEM;
@@ -311,7 +309,12 @@ static int dsa_loop_drv_probe(struct mdio_device *mdiodev)
 
 	dev_set_drvdata(&mdiodev->dev, ds);
 
-	return dsa_register_switch(ds);
+	ret = dsa_register_switch(ds);
+	if (!ret)
+		dev_info(&mdiodev->dev, "%s: 0x%0x\n",
+			 pdata->name, pdata->enabled_ports);
+
+	return ret;
 }
 
 static void dsa_loop_drv_remove(struct mdio_device *mdiodev)
-- 
2.25.1