From: Vladimir Oltean <olteanv@gmail.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andrew@lunn.ch, vivien.didelot@gmail.com,
f.fainelli@gmail.com, antoine.tenart@bootlin.com,
alexandre.belloni@bootlin.com, UNGLinuxDriver@microchip.com,
alexandru.marginean@nxp.com, claudiu.manoil@nxp.com,
madalin.bucur@oss.nxp.com, radu-andrei.bulie@nxp.com,
fido_max@inbox.ru
Subject: [PATCH v4 net-next 03/11] net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields
Date: Mon, 13 Jul 2020 19:57:03 +0300 [thread overview]
Message-ID: <20200713165711.2518150-4-olteanv@gmail.com> (raw)
In-Reply-To: <20200713165711.2518150-1-olteanv@gmail.com>
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Currently Felix and Ocelot share the same bit layout in these per-port
registers, but Seville does not. So we need reg_fields for that.
Actually since these are per-port registers, we need to also specify the
number of ports, and register size per port, and use the regmap API for
multiple ports.
There's a more subtle point to be made about the other 2 register
fields:
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG
- QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE
which we are not writing any longer, for 2 reasons:
- Using the previous API (ocelot_write_rix), we were only writing 1 for
Felix and Ocelot, which was their hardware-default value, and which
there wasn't any intention in changing.
- In the case of SCH_NEXT_CFG, in fact Seville does not have this
register field at all, and therefore, if we want to have common code
we would be required to not write to it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v4:
- Rebased on top of patch "net: mscc: ocelot: move ocelot_regs.c into
ocelot_vsc7514.c" which was merged since last submission.
- Actually stopped doing any more extraneous writes to anything except
QSYS_SWITCH_PORT_MODE_PORT_ENA.
Changes in v3:
Clarified in the commit message why we're no longer writing to the
QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG register field.
Changes in v2:
None.
drivers/net/dsa/ocelot/felix.c | 9 ++----
drivers/net/dsa/ocelot/felix_vsc9959.c | 11 +++++++
drivers/net/ethernet/mscc/ocelot.c | 36 +++++++++-------------
drivers/net/ethernet/mscc/ocelot.h | 6 ----
drivers/net/ethernet/mscc/ocelot_io.c | 2 ++
drivers/net/ethernet/mscc/ocelot_vsc7514.c | 11 +++++++
include/soc/mscc/ocelot.h | 15 +++++++++
include/soc/mscc/ocelot_qsys.h | 13 --------
include/soc/mscc/ocelot_sys.h | 13 --------
9 files changed, 56 insertions(+), 60 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index bf0bd5c7b12c..4b255ed614e4 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -249,8 +249,7 @@ static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
struct ocelot_port *ocelot_port = ocelot->ports[port];
ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
- ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
- QSYS_SWITCH_PORT_MODE, port);
+ ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 0);
}
static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -326,10 +325,8 @@ static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
ANA_PORT_PORT_CFG, port);
/* Core: Enable port for frame transfer */
- ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
- QSYS_SWITCH_PORT_MODE_PORT_ENA,
- QSYS_SWITCH_PORT_MODE, port);
+ ocelot_fields_write(ocelot, port,
+ QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
if (felix->info->pcs_link_up)
felix->info->pcs_link_up(ocelot, port, link_an_mode, interface,
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index b97c12a783eb..efbfbdccb2b6 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -503,6 +503,17 @@ static const struct reg_field vsc9959_regfields[REGFIELD_MAX] = {
[ANA_TABLES_MACTINDX_M_INDEX] = REG_FIELD(ANA_TABLES_MACTINDX, 0, 10),
[SYS_RESET_CFG_CORE_ENA] = REG_FIELD(SYS_RESET_CFG, 0, 0),
[GCB_SOFT_RST_SWC_RST] = REG_FIELD(GCB_SOFT_RST, 0, 0),
+ /* Replicated per number of ports (7), register size 4 per port */
+ [QSYS_SWITCH_PORT_MODE_PORT_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 14, 14, 7, 4),
+ [QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 11, 13, 7, 4),
+ [QSYS_SWITCH_PORT_MODE_YEL_RSRVD] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 10, 10, 7, 4),
+ [QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 9, 9, 7, 4),
+ [QSYS_SWITCH_PORT_MODE_TX_PFC_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 1, 8, 7, 4),
+ [QSYS_SWITCH_PORT_MODE_TX_PFC_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 0, 0, 7, 4),
+ [SYS_PORT_MODE_DATA_WO_TS] = REG_FIELD_ID(SYS_PORT_MODE, 5, 6, 7, 4),
+ [SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 7, 4),
+ [SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 7, 4),
+ [SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 7, 4),
};
static const struct ocelot_stat_layout vsc9959_stats_layout[] = {
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index e815aad8d85e..36986fccedf4 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -389,10 +389,8 @@ void ocelot_adjust_link(struct ocelot *ocelot, int port,
ANA_PFC_PFC_CFG, port);
/* Core: Enable port for frame transfer */
- ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
- QSYS_SWITCH_PORT_MODE_PORT_ENA,
- QSYS_SWITCH_PORT_MODE, port);
+ ocelot_fields_write(ocelot, port,
+ QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
/* Flow control */
ocelot_write_rix(ocelot, SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |
@@ -423,8 +421,7 @@ void ocelot_port_disable(struct ocelot *ocelot, int port)
struct ocelot_port *ocelot_port = ocelot->ports[port];
ocelot_port_writel(ocelot_port, 0, DEV_MAC_ENA_CFG);
- ocelot_rmw_rix(ocelot, 0, QSYS_SWITCH_PORT_MODE_PORT_ENA,
- QSYS_SWITCH_PORT_MODE, port);
+ ocelot_fields_write(ocelot, port, QSYS_SWITCH_PORT_MODE_PORT_ENA, 0);
}
EXPORT_SYMBOL(ocelot_port_disable);
@@ -1392,27 +1389,22 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi,
QSYS_EXT_CPU_CFG);
/* Enable NPI port */
- ocelot_write_rix(ocelot,
- QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
- QSYS_SWITCH_PORT_MODE_PORT_ENA,
- QSYS_SWITCH_PORT_MODE, npi);
+ ocelot_fields_write(ocelot, npi,
+ QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
/* NPI port Injection/Extraction configuration */
- ocelot_write_rix(ocelot,
- SYS_PORT_MODE_INCL_XTR_HDR(extraction) |
- SYS_PORT_MODE_INCL_INJ_HDR(injection),
- SYS_PORT_MODE, npi);
+ ocelot_fields_write(ocelot, npi, SYS_PORT_MODE_INCL_XTR_HDR,
+ extraction);
+ ocelot_fields_write(ocelot, npi, SYS_PORT_MODE_INCL_INJ_HDR,
+ injection);
}
/* Enable CPU port module */
- ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE |
- QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) |
- QSYS_SWITCH_PORT_MODE_PORT_ENA,
- QSYS_SWITCH_PORT_MODE, cpu);
+ ocelot_fields_write(ocelot, cpu, QSYS_SWITCH_PORT_MODE_PORT_ENA, 1);
/* CPU port Injection/Extraction configuration */
- ocelot_write_rix(ocelot, SYS_PORT_MODE_INCL_XTR_HDR(extraction) |
- SYS_PORT_MODE_INCL_INJ_HDR(injection),
- SYS_PORT_MODE, cpu);
+ ocelot_fields_write(ocelot, cpu, SYS_PORT_MODE_INCL_XTR_HDR,
+ extraction);
+ ocelot_fields_write(ocelot, cpu, SYS_PORT_MODE_INCL_INJ_HDR,
+ injection);
/* Configure the CPU port to be VLAN aware */
ocelot_write_gix(ocelot, ANA_PORT_VLAN_CFG_VLAN_VID(0) |
diff --git a/drivers/net/ethernet/mscc/ocelot.h b/drivers/net/ethernet/mscc/ocelot.h
index 814b09dd2c11..dc29e05103a1 100644
--- a/drivers/net/ethernet/mscc/ocelot.h
+++ b/drivers/net/ethernet/mscc/ocelot.h
@@ -102,9 +102,6 @@ void ocelot_port_lag_leave(struct ocelot *ocelot, int port,
u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
-#define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
-#define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
-
int ocelot_probe_port(struct ocelot *ocelot, int port, struct regmap *target,
struct phy_device *phy);
@@ -116,7 +113,4 @@ extern struct notifier_block ocelot_netdevice_nb;
extern struct notifier_block ocelot_switchdev_nb;
extern struct notifier_block ocelot_switchdev_blocking_nb;
-#define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
-#define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
-
#endif
diff --git a/drivers/net/ethernet/mscc/ocelot_io.c b/drivers/net/ethernet/mscc/ocelot_io.c
index 741f653bc85b..d22711282183 100644
--- a/drivers/net/ethernet/mscc/ocelot_io.c
+++ b/drivers/net/ethernet/mscc/ocelot_io.c
@@ -89,6 +89,8 @@ int ocelot_regfields_init(struct ocelot *ocelot,
regfield.reg = ocelot->map[target][reg & REG_MASK];
regfield.lsb = regfields[i].lsb;
regfield.msb = regfields[i].msb;
+ regfield.id_size = regfields[i].id_size;
+ regfield.id_offset = regfields[i].id_offset;
ocelot->regfields[i] =
devm_regmap_field_alloc(ocelot->dev,
diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
index 83c17c689641..9c6a9d44871d 100644
--- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
+++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
@@ -358,6 +358,17 @@ static const struct reg_field ocelot_regfields[REGFIELD_MAX] = {
[SYS_RESET_CFG_CORE_ENA] = REG_FIELD(SYS_RESET_CFG, 2, 2),
[SYS_RESET_CFG_MEM_ENA] = REG_FIELD(SYS_RESET_CFG, 1, 1),
[SYS_RESET_CFG_MEM_INIT] = REG_FIELD(SYS_RESET_CFG, 0, 0),
+ /* Replicated per number of ports (11), register size 4 per port */
+ [QSYS_SWITCH_PORT_MODE_PORT_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 14, 14, 11, 4),
+ [QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 11, 13, 11, 4),
+ [QSYS_SWITCH_PORT_MODE_YEL_RSRVD] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 10, 10, 11, 4),
+ [QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 9, 9, 11, 4),
+ [QSYS_SWITCH_PORT_MODE_TX_PFC_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 1, 8, 11, 4),
+ [QSYS_SWITCH_PORT_MODE_TX_PFC_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 0, 0, 11, 4),
+ [SYS_PORT_MODE_DATA_WO_TS] = REG_FIELD_ID(SYS_PORT_MODE, 5, 6, 11, 4),
+ [SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 11, 4),
+ [SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 11, 4),
+ [SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 11, 4),
};
static const struct ocelot_stat_layout ocelot_stats_layout[] = {
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 348fa26a349c..19d97585345a 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -490,11 +490,21 @@ enum ocelot_regfield {
ANA_TABLES_MACACCESS_B_DOM,
ANA_TABLES_MACTINDX_BUCKET,
ANA_TABLES_MACTINDX_M_INDEX,
+ QSYS_SWITCH_PORT_MODE_PORT_ENA,
+ QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG,
+ QSYS_SWITCH_PORT_MODE_YEL_RSRVD,
+ QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE,
+ QSYS_SWITCH_PORT_MODE_TX_PFC_ENA,
+ QSYS_SWITCH_PORT_MODE_TX_PFC_MODE,
QSYS_TIMED_FRAME_ENTRY_TFRM_VLD,
QSYS_TIMED_FRAME_ENTRY_TFRM_FP,
QSYS_TIMED_FRAME_ENTRY_TFRM_PORTNO,
QSYS_TIMED_FRAME_ENTRY_TFRM_TM_SEL,
QSYS_TIMED_FRAME_ENTRY_TFRM_TM_T,
+ SYS_PORT_MODE_DATA_WO_TS,
+ SYS_PORT_MODE_INCL_INJ_HDR,
+ SYS_PORT_MODE_INCL_XTR_HDR,
+ SYS_PORT_MODE_INCL_HDR_ERR,
SYS_RESET_CFG_CORE_ENA,
SYS_RESET_CFG_MEM_ENA,
SYS_RESET_CFG_MEM_INIT,
@@ -638,6 +648,11 @@ struct ocelot_policer {
#define ocelot_rmw_rix(ocelot, val, m, reg, ri) __ocelot_rmw_ix(ocelot, val, m, reg, reg##_RSZ * (ri))
#define ocelot_rmw(ocelot, val, m, reg) __ocelot_rmw_ix(ocelot, val, m, reg, 0)
+#define ocelot_field_write(ocelot, reg, val) regmap_field_write((ocelot)->regfields[(reg)], (val))
+#define ocelot_field_read(ocelot, reg, val) regmap_field_read((ocelot)->regfields[(reg)], (val))
+#define ocelot_fields_write(ocelot, id, reg, val) regmap_fields_write((ocelot)->regfields[(reg)], (id), (val))
+#define ocelot_fields_read(ocelot, id, reg, val) regmap_fields_read((ocelot)->regfields[(reg)], (id), (val))
+
/* I/O */
u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg);
diff --git a/include/soc/mscc/ocelot_qsys.h b/include/soc/mscc/ocelot_qsys.h
index d8c63aa761be..a814bc2017d8 100644
--- a/include/soc/mscc/ocelot_qsys.h
+++ b/include/soc/mscc/ocelot_qsys.h
@@ -13,19 +13,6 @@
#define QSYS_PORT_MODE_DEQUEUE_DIS BIT(1)
#define QSYS_PORT_MODE_DEQUEUE_LATE BIT(0)
-#define QSYS_SWITCH_PORT_MODE_RSZ 0x4
-
-#define QSYS_SWITCH_PORT_MODE_PORT_ENA BIT(14)
-#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(x) (((x) << 11) & GENMASK(13, 11))
-#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_M GENMASK(13, 11)
-#define QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG_X(x) (((x) & GENMASK(13, 11)) >> 11)
-#define QSYS_SWITCH_PORT_MODE_YEL_RSRVD BIT(10)
-#define QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE BIT(9)
-#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA(x) (((x) << 1) & GENMASK(8, 1))
-#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_M GENMASK(8, 1)
-#define QSYS_SWITCH_PORT_MODE_TX_PFC_ENA_X(x) (((x) & GENMASK(8, 1)) >> 1)
-#define QSYS_SWITCH_PORT_MODE_TX_PFC_MODE BIT(0)
-
#define QSYS_STAT_CNT_CFG_TX_GREEN_CNT_MODE BIT(5)
#define QSYS_STAT_CNT_CFG_TX_YELLOW_CNT_MODE BIT(4)
#define QSYS_STAT_CNT_CFG_DROP_GREEN_CNT_MODE BIT(3)
diff --git a/include/soc/mscc/ocelot_sys.h b/include/soc/mscc/ocelot_sys.h
index 16f91e172bcb..8a95fc93fde5 100644
--- a/include/soc/mscc/ocelot_sys.h
+++ b/include/soc/mscc/ocelot_sys.h
@@ -12,19 +12,6 @@
#define SYS_COUNT_TX_OCTETS_RSZ 0x4
-#define SYS_PORT_MODE_RSZ 0x4
-
-#define SYS_PORT_MODE_DATA_WO_TS(x) (((x) << 5) & GENMASK(6, 5))
-#define SYS_PORT_MODE_DATA_WO_TS_M GENMASK(6, 5)
-#define SYS_PORT_MODE_DATA_WO_TS_X(x) (((x) & GENMASK(6, 5)) >> 5)
-#define SYS_PORT_MODE_INCL_INJ_HDR(x) (((x) << 3) & GENMASK(4, 3))
-#define SYS_PORT_MODE_INCL_INJ_HDR_M GENMASK(4, 3)
-#define SYS_PORT_MODE_INCL_INJ_HDR_X(x) (((x) & GENMASK(4, 3)) >> 3)
-#define SYS_PORT_MODE_INCL_XTR_HDR(x) (((x) << 1) & GENMASK(2, 1))
-#define SYS_PORT_MODE_INCL_XTR_HDR_M GENMASK(2, 1)
-#define SYS_PORT_MODE_INCL_XTR_HDR_X(x) (((x) & GENMASK(2, 1)) >> 1)
-#define SYS_PORT_MODE_INJ_HDR_ERR BIT(0)
-
#define SYS_FRONT_PORT_MODE_RSZ 0x4
#define SYS_FRONT_PORT_MODE_HDX_MODE BIT(0)
--
2.25.1
next prev parent reply other threads:[~2020-07-13 16:59 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 16:57 [PATCH v4 net-next 00/11] New DSA driver for VSC9953 Seville switch Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 01/11] net: mscc: ocelot: convert port registers to regmap Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 02/11] soc: mscc: ocelot: add MII registers description Vladimir Oltean
2020-07-13 16:57 ` Vladimir Oltean [this message]
2020-07-13 16:57 ` [PATCH v4 net-next 04/11] net: dsa: felix: create a template for the DSA tags on xmit Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 05/11] net: mscc: ocelot: split writes to pause frame enable bit and to thresholds Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 06/11] net: mscc: ocelot: disable flow control on NPI interface Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 07/11] net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 08/11] net: mscc: ocelot: extend watermark encoding function Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 09/11] net: dsa: felix: move probing to felix_vsc9959.c Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 10/11] net: dsa: felix: introduce support for Seville VSC9953 switch Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 11/11] docs: devicetree: add bindings for Seville DSA switch inside Felix driver Vladimir Oltean
2020-07-14 0:40 ` [PATCH v4 net-next 00/11] New DSA driver for VSC9953 Seville switch David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200713165711.2518150-4-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandru.marginean@nxp.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=fido_max@inbox.ru \
--cc=madalin.bucur@oss.nxp.com \
--cc=netdev@vger.kernel.org \
--cc=radu-andrei.bulie@nxp.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).