From: Vladimir Oltean <olteanv@gmail.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, andrew@lunn.ch, vivien.didelot@gmail.com,
f.fainelli@gmail.com, antoine.tenart@bootlin.com,
alexandre.belloni@bootlin.com, UNGLinuxDriver@microchip.com,
alexandru.marginean@nxp.com, claudiu.manoil@nxp.com,
madalin.bucur@oss.nxp.com, radu-andrei.bulie@nxp.com,
fido_max@inbox.ru
Subject: [PATCH v4 net-next 07/11] net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield
Date: Mon, 13 Jul 2020 19:57:07 +0300 [thread overview]
Message-ID: <20200713165711.2518150-8-olteanv@gmail.com> (raw)
In-Reply-To: <20200713165711.2518150-1-olteanv@gmail.com>
From: Maxim Kochetkov <fido_max@inbox.ru>
Seville has a different bitwise layout than Ocelot and Felix.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
Changes in v4:
Rebased on top of patch "net: mscc: ocelot: move ocelot_regs.c into
ocelot_vsc7514.c" which was merged since last submission.
Changes in v3:
None.
Changes in v2:
None.
drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +++
drivers/net/ethernet/mscc/ocelot.c | 14 ++++++--------
drivers/net/ethernet/mscc/ocelot_vsc7514.c | 3 +++
include/soc/mscc/ocelot.h | 3 +++
include/soc/mscc/ocelot_sys.h | 10 ----------
5 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
index d640146acc3d..fea482ad92c7 100644
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -515,6 +515,9 @@ static const struct reg_field vsc9959_regfields[REGFIELD_MAX] = {
[SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 7, 4),
[SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 7, 4),
[SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 7, 4),
+ [SYS_PAUSE_CFG_PAUSE_START] = REG_FIELD_ID(SYS_PAUSE_CFG, 10, 18, 7, 4),
+ [SYS_PAUSE_CFG_PAUSE_STOP] = REG_FIELD_ID(SYS_PAUSE_CFG, 1, 9, 7, 4),
+ [SYS_PAUSE_CFG_PAUSE_ENA] = REG_FIELD_ID(SYS_PAUSE_CFG, 0, 1, 7, 4),
};
static const struct ocelot_stat_layout vsc9959_stats_layout[] = {
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 2a44305912d2..4d5222fa3397 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1276,10 +1276,10 @@ void ocelot_port_set_maxlen(struct ocelot *ocelot, int port, size_t sdu)
/* Set Pause watermark hysteresis */
pause_start = 6 * maxlen / OCELOT_BUFFER_CELL_SZ;
pause_stop = 4 * maxlen / OCELOT_BUFFER_CELL_SZ;
- ocelot_rmw_rix(ocelot, SYS_PAUSE_CFG_PAUSE_START(pause_start),
- SYS_PAUSE_CFG_PAUSE_START_M, SYS_PAUSE_CFG, port);
- ocelot_rmw_rix(ocelot, SYS_PAUSE_CFG_PAUSE_STOP(pause_stop),
- SYS_PAUSE_CFG_PAUSE_STOP_M, SYS_PAUSE_CFG, port);
+ ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_START,
+ pause_start);
+ ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_STOP,
+ pause_stop);
/* Tail dropping watermark */
atop_wm = (ocelot->shared_queue_sz - 9 * maxlen) /
@@ -1343,8 +1343,7 @@ void ocelot_init_port(struct ocelot *ocelot, int port)
ocelot_port_writel(ocelot_port, 0, DEV_MAC_FC_MAC_LOW_CFG);
/* Enable transmission of pause frames */
- ocelot_rmw_rix(ocelot, SYS_PAUSE_CFG_PAUSE_ENA, SYS_PAUSE_CFG_PAUSE_ENA,
- SYS_PAUSE_CFG, port);
+ ocelot_fields_write(ocelot, port, SYS_PAUSE_CFG_PAUSE_ENA, 1);
/* Drop frames with multicast source address */
ocelot_rmw_gix(ocelot, ANA_PORT_DROP_CFG_DROP_MC_SMAC_ENA,
@@ -1403,8 +1402,7 @@ void ocelot_configure_cpu(struct ocelot *ocelot, int npi,
injection);
/* Disable transmission of pause frames */
- ocelot_rmw_rix(ocelot, 0, SYS_PAUSE_CFG_PAUSE_ENA,
- SYS_PAUSE_CFG, npi);
+ ocelot_fields_write(ocelot, npi, SYS_PAUSE_CFG_PAUSE_ENA, 0);
}
/* Enable CPU port module */
diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
index 9c6a9d44871d..e9cbfbed1fc6 100644
--- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
+++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
@@ -369,6 +369,9 @@ static const struct reg_field ocelot_regfields[REGFIELD_MAX] = {
[SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 11, 4),
[SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 11, 4),
[SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 11, 4),
+ [SYS_PAUSE_CFG_PAUSE_START] = REG_FIELD_ID(SYS_PAUSE_CFG, 10, 18, 11, 4),
+ [SYS_PAUSE_CFG_PAUSE_STOP] = REG_FIELD_ID(SYS_PAUSE_CFG, 1, 9, 11, 4),
+ [SYS_PAUSE_CFG_PAUSE_ENA] = REG_FIELD_ID(SYS_PAUSE_CFG, 0, 1, 11, 4),
};
static const struct ocelot_stat_layout ocelot_stats_layout[] = {
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 6cfbace57770..71bb92bcfdf7 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -511,6 +511,9 @@ enum ocelot_regfield {
GCB_SOFT_RST_SWC_RST,
GCB_MIIM_MII_STATUS_PENDING,
GCB_MIIM_MII_STATUS_BUSY,
+ SYS_PAUSE_CFG_PAUSE_START,
+ SYS_PAUSE_CFG_PAUSE_STOP,
+ SYS_PAUSE_CFG_PAUSE_ENA,
REGFIELD_MAX
};
diff --git a/include/soc/mscc/ocelot_sys.h b/include/soc/mscc/ocelot_sys.h
index 8a95fc93fde5..79cf40ccdbe6 100644
--- a/include/soc/mscc/ocelot_sys.h
+++ b/include/soc/mscc/ocelot_sys.h
@@ -43,16 +43,6 @@
#define SYS_TIMESTAMP_OFFSET_TIMESTAMP_OFFSET(x) ((x) & GENMASK(5, 0))
#define SYS_TIMESTAMP_OFFSET_TIMESTAMP_OFFSET_M GENMASK(5, 0)
-#define SYS_PAUSE_CFG_RSZ 0x4
-
-#define SYS_PAUSE_CFG_PAUSE_START(x) (((x) << 10) & GENMASK(18, 10))
-#define SYS_PAUSE_CFG_PAUSE_START_M GENMASK(18, 10)
-#define SYS_PAUSE_CFG_PAUSE_START_X(x) (((x) & GENMASK(18, 10)) >> 10)
-#define SYS_PAUSE_CFG_PAUSE_STOP(x) (((x) << 1) & GENMASK(9, 1))
-#define SYS_PAUSE_CFG_PAUSE_STOP_M GENMASK(9, 1)
-#define SYS_PAUSE_CFG_PAUSE_STOP_X(x) (((x) & GENMASK(9, 1)) >> 1)
-#define SYS_PAUSE_CFG_PAUSE_ENA BIT(0)
-
#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START(x) (((x) << 9) & GENMASK(17, 9))
#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START_M GENMASK(17, 9)
#define SYS_PAUSE_TOT_CFG_PAUSE_TOT_START_X(x) (((x) & GENMASK(17, 9)) >> 9)
--
2.25.1
next prev parent reply other threads:[~2020-07-13 16:59 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 16:57 [PATCH v4 net-next 00/11] New DSA driver for VSC9953 Seville switch Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 01/11] net: mscc: ocelot: convert port registers to regmap Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 02/11] soc: mscc: ocelot: add MII registers description Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 03/11] net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 04/11] net: dsa: felix: create a template for the DSA tags on xmit Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 05/11] net: mscc: ocelot: split writes to pause frame enable bit and to thresholds Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 06/11] net: mscc: ocelot: disable flow control on NPI interface Vladimir Oltean
2020-07-13 16:57 ` Vladimir Oltean [this message]
2020-07-13 16:57 ` [PATCH v4 net-next 08/11] net: mscc: ocelot: extend watermark encoding function Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 09/11] net: dsa: felix: move probing to felix_vsc9959.c Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 10/11] net: dsa: felix: introduce support for Seville VSC9953 switch Vladimir Oltean
2020-07-13 16:57 ` [PATCH v4 net-next 11/11] docs: devicetree: add bindings for Seville DSA switch inside Felix driver Vladimir Oltean
2020-07-14 0:40 ` [PATCH v4 net-next 00/11] New DSA driver for VSC9953 Seville switch David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200713165711.2518150-8-olteanv@gmail.com \
--to=olteanv@gmail.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandru.marginean@nxp.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=fido_max@inbox.ru \
--cc=madalin.bucur@oss.nxp.com \
--cc=netdev@vger.kernel.org \
--cc=radu-andrei.bulie@nxp.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).