netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Lobakin <alobakin@marvell.com>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>
Cc: Alexander Lobakin <alobakin@marvell.com>,
	Igor Russkikh <irusskikh@marvell.com>,
	Michal Kalderon <michal.kalderon@marvell.com>,
	"Ariel Elior" <aelior@marvell.com>,
	Denis Bolotin <denis.bolotin@marvell.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Andrew Lunn <andrew@lunn.ch>, <GR-everest-linux-l2@marvell.com>,
	<QLogic-Storage-Upstream@marvell.com>, <netdev@vger.kernel.org>,
	<linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 net-next 14/16] qed: add missing loopback modes
Date: Mon, 20 Jul 2020 21:08:13 +0300	[thread overview]
Message-ID: <20200720180815.107-15-alobakin@marvell.com> (raw)
In-Reply-To: <20200720180815.107-1-alobakin@marvell.com>

These modes are relevant only for several boards, but may be reported by
MFW as well as the others.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_hsi.h  |  5 +++++
 drivers/net/ethernet/qlogic/qed/qed_main.c | 19 +++++++++++++++++++
 include/linux/qed/qed_if.h                 |  5 +++++
 3 files changed, 29 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
index debc55923251..5b81d5d42397 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
@@ -11554,6 +11554,11 @@ struct eth_phy_cfg {
 #define ETH_LOOPBACK_EXT_PHY			0x2
 #define ETH_LOOPBACK_EXT			0x3
 #define ETH_LOOPBACK_MAC			0x4
+#define ETH_LOOPBACK_CNIG_AH_ONLY_0123		0x5
+#define ETH_LOOPBACK_CNIG_AH_ONLY_2301		0x6
+#define ETH_LOOPBACK_PCS_AH_ONLY		0x7
+#define ETH_LOOPBACK_REVERSE_MAC_AH_ONLY	0x8
+#define ETH_LOOPBACK_INT_PHY_FEA_AH_ONLY	0x9
 
 	u32					eee_cfg;
 #define EEE_CFG_EEE_ENABLED			BIT(0)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 91e7cfc544f0..fea155c6ff11 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1587,6 +1587,25 @@ static int qed_set_link(struct qed_dev *cdev, struct qed_link_params *params)
 		case QED_LINK_LOOPBACK_MAC:
 			link_params->loopback_mode = ETH_LOOPBACK_MAC;
 			break;
+		case QED_LINK_LOOPBACK_CNIG_AH_ONLY_0123:
+			link_params->loopback_mode =
+				ETH_LOOPBACK_CNIG_AH_ONLY_0123;
+			break;
+		case QED_LINK_LOOPBACK_CNIG_AH_ONLY_2301:
+			link_params->loopback_mode =
+				ETH_LOOPBACK_CNIG_AH_ONLY_2301;
+			break;
+		case QED_LINK_LOOPBACK_PCS_AH_ONLY:
+			link_params->loopback_mode = ETH_LOOPBACK_PCS_AH_ONLY;
+			break;
+		case QED_LINK_LOOPBACK_REVERSE_MAC_AH_ONLY:
+			link_params->loopback_mode =
+				ETH_LOOPBACK_REVERSE_MAC_AH_ONLY;
+			break;
+		case QED_LINK_LOOPBACK_INT_PHY_FEA_AH_ONLY:
+			link_params->loopback_mode =
+				ETH_LOOPBACK_INT_PHY_FEA_AH_ONLY;
+			break;
 		default:
 			link_params->loopback_mode = ETH_LOOPBACK_NONE;
 			break;
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h
index f0b4cdc79299..2e780159a5fb 100644
--- a/include/linux/qed/qed_if.h
+++ b/include/linux/qed/qed_if.h
@@ -696,6 +696,11 @@ struct qed_link_params {
 #define QED_LINK_LOOPBACK_EXT_PHY		BIT(2)
 #define QED_LINK_LOOPBACK_EXT			BIT(3)
 #define QED_LINK_LOOPBACK_MAC			BIT(4)
+#define QED_LINK_LOOPBACK_CNIG_AH_ONLY_0123	BIT(5)
+#define QED_LINK_LOOPBACK_CNIG_AH_ONLY_2301	BIT(6)
+#define QED_LINK_LOOPBACK_PCS_AH_ONLY		BIT(7)
+#define QED_LINK_LOOPBACK_REVERSE_MAC_AH_ONLY	BIT(8)
+#define QED_LINK_LOOPBACK_INT_PHY_FEA_AH_ONLY	BIT(9)
 
 	struct qed_link_eee_params		eee;
 	u32					fec;
-- 
2.25.1


  parent reply	other threads:[~2020-07-20 18:10 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-20 18:07 [PATCH v3 net-next 00/16] qed, qede: add support for new operating modes Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 01/16] linkmode: introduce linkmode_intersects() Alexander Lobakin
2020-07-20 18:31   ` Andrew Lunn
2020-07-20 18:08 ` [PATCH v3 net-next 02/16] qed, qede, qedf: convert link mode from u32 to ETHTOOL_LINK_MODE Alexander Lobakin
2020-07-20 18:34   ` Andrew Lunn
2020-07-20 18:08 ` [PATCH v3 net-next 03/16] qede: populate supported link modes maps on module init Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 04/16] qed: reformat public_port::transceiver_data a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 05/16] qed: add support for multi-rate transceivers Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 06/16] qed: use transceiver data to fill link partner's advertising speeds Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 07/16] qed: reformat several structures a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 08/16] qed: add support for Forward Error Correction Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 09/16] qede: format qede{,_vf}_ethtool_ops Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 10/16] qede: introduce support for FEC control Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 11/16] qed: reformat several structures a bit Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 12/16] qed: remove unused qed_hw_info::port_mode and QED_PORT_MODE Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 13/16] qed: add support for new port modes Alexander Lobakin
2020-07-20 18:08 ` Alexander Lobakin [this message]
2020-07-20 18:08 ` [PATCH v3 net-next 15/16] qed: populate supported link modes maps on module init Alexander Lobakin
2020-07-20 18:08 ` [PATCH v3 net-next 16/16] qed: add support for the extended speed and FEC modes Alexander Lobakin
2020-07-21  0:14 ` [PATCH v3 net-next 00/16] qed, qede: add support for new operating modes Jakub Kicinski
2020-07-21  1:00 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200720180815.107-15-alobakin@marvell.com \
    --to=alobakin@marvell.com \
    --cc=GR-everest-linux-l2@marvell.com \
    --cc=QLogic-Storage-Upstream@marvell.com \
    --cc=aelior@marvell.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=denis.bolotin@marvell.com \
    --cc=irusskikh@marvell.com \
    --cc=jejb@linux.ibm.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=michal.kalderon@marvell.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).